Acidogenic fermentation of blended food‐waste in combination with primary sludge for the production of volatile fatty acids

The performance of a laboratory‐scale anaerobic acidogenic fermenter fed with a mixture of blended kitchen food‐waste and primary sludge from a sewage treatment plant was investigated for the production of volatile fatty acids (VFA). The operating variables for acidogenic fermentation were kitchen food‐waste content (10 and 25 wt %), hydraulic retention time (HRT: 1, 3 and 5 days), temperature (ambient: 18 ± 2 °C, and mesophilic: 35 ± 2 °C) and pH (varied from 5.2 to 6.7). The experimental results indicated that effluent VFA concentrations and VFA production rates were higher at ambient temperature than at mesophilic conditions. The net amount of VFA with 10 wt % food‐waste increased up to 920 mg dm^?3 with an increase of HRT, but contrasting results (a decrease of 2610 mg dm^?3) were found due to the conversion of VFA into biogas in the case of 25 wt % food‐waste, which increased significantly at HRT of 3–5 days. In terms of biogas composition (CO₂ and CH₄), the organic matter was converted into CO₂ through the oxidative pathway by facultative species at low temperature while mesophilic temperature and optimum pH (6.3–7.8) played a pivotal role in increasing rate of conversion of VFA into biogas by methanogenesis. Rates of VFA production and their conversion are dependent on the food‐waste content in the mixture. Yet, the higher concentration of food‐waste (25% compared with 10%) did not produce VFA proportionally due to the increased rate of conversion of VFA into gaseous products. The maximum VFA production rate (0.318 g VFA_produced g^?1 VS_fed day^?1) was achieved in the 10 wt % food‐waste at ambient temperature and at a 5‐day HRT. Copyright © 2005 Society of Chemical Industry     

Clinical investigation of traumatic injuries of permanent incisors in Izmir, Turkey

470 injured teeth of 370 patients who consulted the Dental Clinic of Ege University, Izmir, Turkey for examination or treatment between 1981-1993 were evaluated. Information concerning sex, age of patients at the time of injury, cause of trauma, number of injured teeth, type of tooth and type of trauma were recorded. More boys suffered traumatic injuries (64.8%) than girls (35.2%). Patients aged 11-15 years old exhibited the highest number of injuries (34.4%) followed by the 6-10 years old group (24.5%). Most injuries involved one tooth (60%) and maxillary central incisors were the most often affected teeth (66.2%). The leading cause of injury was undefined falls (45.1%). At the initial examination, cases seen after a long posttraumatic period showed more complications than those presented within a short time period. Educational programs about the importance of dental trauma, the benefits of immediate attendance and conservation of avulsed and fractured teeth would be very helpful for patients. Additionally improving the knowledge of the dental practitioner about trauma would be another important point in solving the problem.     

Further studies of the mixed acetals of nucleosides

We reported in 1988 on a new nucleoside modification reaction: the exocyclic amino groups of (d)adenosine and (d)cytidine react rapidly at ambient temperature with acetaldehyde and alcohols to give stable mixed acetals (N-ethylethoxy-acetal). NH2 + O = CH(CH3) + ROH-->NH-CH(CH3)-O-R + H2O. Here we report in detail on the occurrence of this reaction in very dilute aqueous solution (ie under biological conditions), on its mechanism and kinetics, on the mixed acetal formation with other aldehydes and other nucleic acid components, and on the question of whether these adducts are mutagenic.     

Controlling bacterial contamination of an enteral formula through the use of a unique closed system: contamination, enteral formulas, closed system

Contamination of enteral diets may play an essential role in formula tolerance and safety for patients. Contaminated enteral formula commonly support microbiological growth. Commercially sterile liquid formulas received from the manufacturer are required by the Food & Drug Administration (FDA) to be shelf-stable and free from enteric pathogens. This study examined the use of large volume, closed system containers in a typical nursing home. Large volume (1500 mL) containers with unique pierceable caps and piercing spikes were studied to determine their ability to reduce the incidence of microbiological contamination due to their design and ability to decrease handling requirements. This study took place in a room of a typical nursing home. In this clinical setting, 211 containers and administration spike sets were evaluated following a 36-h hangtime. Contamination was virtually nondetectable. Nursing staff in a clinical facility can effectively utilize a large volume, prefilled, ready-to-use feeding system to achieve delivery of noncontaminated product for up to 36 h hangtime.     

From research to practice: the effects of the jointly sponsored dissemination of an arthritis self-care nursing intervention

Various educational programs have been developed and found to be effective in the self-management of arthritis. This study reexamined the effectiveness of one such program, "Bone Up On Arthritis" (BUOA), when the program was delivered by a community-based service organization to a sample of persons (N = 154) who differed widely in disease type and demographic characteristics. Arthritis Foundation staff implemented BUOA at four national sites; data were collected and analyzed by University of Michigan nurse researchers. Investigators found improved scores on all outcome measures (self-care behavior, helplessness, pain, dysfunction, and depression). These findings suggest that "Bone Up" is an effective nursing intervention in multiple organizational and community environments and for diverse patient populations.     

Simulation and optimization of metal-insulator-semiconductorinversion-layer silicon solar cells

Metal-insulator-semiconductor inversion-layer (MIS-IL) silicon solar cells are promising devices for photovoltaic energy conversion due to the ease of junction fabrication. In order to improve the fundamental understanding of these devices, this paper presents a detailed three-dimensional analysis of existing MIS-IL cells by means of two-dimensional (2-D) numerical modeling and circuit simulation. We implement a physical model suggested in the literature for the tunneling current through the MIS tunnel contact into a device simulator and solve the complete set of drift-diffusion equations for electrons and holes within the silicon in two dimensions. Based on experimentally determined device parameters, a good agreement between simulated and experimental current-voltage (I-V) characteristics is obtained, enabling the spatially resolved determination of resistive and recombinative losses. Furthermore, an optimization study is performed to reveal the efficiency limit of MIS-IL silicon solar cells     

Double-loop sigma-delta modulation with DC input

A discrete-time model having a two-bit (2-b) quantizer is analyzed exactly, and an analytical expression for the quantizer noise sequence is found. Rigorous answers are then provided to two fundamental questions for a double-loop sigma-delta modulation system with DC input: (1) What is the long-term statistical behavior of the internal quantizer noise? (2) How does the asymptotic mean square sigma-delta quantization error vary as a function of the oversampling ratio?