Application of SiC-Si functionally gradient material to thermoelectric energy conversion device

Because of its high–temperature chemical stability, SiC ceramic is a promising material for high-temperature device applications such as thermoelectric energy converters. However, the electrical conductivity of SiC ceramic is too low for it to be used as a thermoelectric energy converter at the cold junction. Therefore, we propose a SiC-Si functionally gradient material (FGM) in order to improve the electrical conductivity of the SiC ceramic at the cold junction. An SiC rod was fired in a temperature gradient furnace. One end of the SiC rod was maintained at 2473 K and the other end was maintained at 1973 K for 30 min. After firing, the porous SiC edge fired at 1973 K was dipped into molten Si in order to infiltrate molten Si into the porous SiC. The microstructure of the FGM is classified into three regions: the SiC-Si composite material; the porous SiC ceramic; and the densified SiC ceramic. The electrical conductivity, the Seebeck coefficient and the thermal conductivity for each region of SiC-Si FGM was measured at 300 K; a figure of merit was calculated. The figure of merit of the SiC-Si FGM at the cold junction, at room temperature, was 10⁸ times higher than that of a nongradient SiC ceramic.     

A low wall-loading DEMO reactor design with high priority for early and reliable realization of a tokamak fusion reactor over the cost performance

Based on scientific databases adopted for designing ITER plasmas and on the advancement of fusion nuclear technology from the recent R&D program, a low wall-loading DEMO fusion reactor has been designed, where high priority has been given to the early and reliable realization of a tokamak fusion plasma over the cost performance. Since the major radius of this DEMO reactor is chosen to be 10 m, plasma ignition is achievable with a low fusion power of 0.8 GW and an operation period of 4–5 hours is available only with inductive current drive. The low ignition power makes it possible to adopt a first wall with an austenitic stainless steel, for which significant databases and operating experience exists, due to its use in the presence of neutron irradiation in fission reactors. In step with development of advanced materials, a step-wise increase of the fusion power seems to be feasible and realistic, because this DEMO reactor has the potential to produce a fusion power of 5 GW.     

Modeling of debris cooling with annular gap in the lower RPV and verification based on ALPHA experiments

For severe accident assessment in a light water reactor, heat transfer models in a narrow annular gap between the overheated core debris and the reactor pressure vessel (RPV) are important for evaluating RPV integrity and emergency procedures. Using existing data, the authors developed heat transfer models on the average critical heat flux (CHF) restricted by countercurrent flow limitation (CCFL) and local boiling heat fluxes, and showed that the average CHF depended on the steam–water flow pattern in the narrow gap and that the local heat fluxes were similar to the pool boiling curve. We evaluated the validity of heat transfer models by simple calculations for ALPHA experiments performed at Japan Atomic Energy Research Institute. Calculated results showed that heat fluxes on the crust surface were restricted mainly by thermal resistance of the crust after the crust formation, and emissivity on the crust surface did not have much effect on the heat fluxes. The calculated vessel temperature during the heat-up process and peak vessel temperature agreed well with the measurements, which confirmed the validity of the average CHF correlation. However, the vessel cooling rate was underestimated mainly due to underestimation of the gap size.     

Repeated vergence adaptation causes the decline of visual functions in watching stereoscopic television

To evaluate visual fatigue when viewing stereoscopic TV, a technology expected to become the broadcasting display system of the future. Wide public acceptance of stereoscopic TV awaits resolution of many issues, including visual fatigue on viewing TV images. Visual fatigue was induced using a visual function simulator, consisting of prism and lens optical systems, while viewing stereoscopic TV. We assessed subject visual fatigue through subjective reports of symptoms and by the changes in visual functions. These functions included: viewer B [Js fusional break point, recovery point, accommodation step response, and visual evoked cortical potentials (VECP)]. Significant changes of some visual functions were found after watching simulated stereoscopic TV when the vergence load was heavy or when it changed over time; relative vergence limits decreased and the latency of VECP increased after watching, reflecting visual fatigue. After subjects rested, relative vergence limits recovered to pre-viewing levels. Our findings lead us to conclude that, aside from excessive horizontal binocular parallax, discontinuous changes in parallax is also a major factor that contributes to visual fatigue in the viewing of stereoscopic images. It also causes a decreased range of relative vergence, accommodation response, and a delay in the P100 latency of VECP.     

Numerical simulation of oscillatory flow in melt during InSb single crystal growth by RF heating Czochralski method

Oscillatory flow present in the melt during InSb single crystal growth using an RF-heating Czochralski method has been numerically investigated by means of the finite difference method using the HSMAC algorithm. The thermal boundary conditions required for the numerical simulation model were obtained experimentally by measuring the temperature profile along the crucible of a Czochralski system by means of thermocouples mounted in the crucible. Results of numerical simulations showed that the use of a third-order upwind discretization scheme was necessary to catch the oscillatory behaviour of the fluid flow in the melt. It was shown that this oscillatory behaviour strongly depends on the crystal rotation rate. Indeed, the oscillation period increases when the crystal rotation rate is above a critical rotation rate. In order to avoid such oscillations, crystal rotation rates lower than this critical value of crystal rotation rate must be selected for the growth of high quality crystals free of striations. © 1998 John Wiley & Sons, Ltd.     

High performance 35 nm gate length CMOS with NO oxynitride gate dielectric and Ni salicide

The 35 nm gate length CMOS devices with oxynitride gate dielectric and Ni salicide have been fabricated to study the feasibility of higher performance operation. Nitrogen concentration in gate oxynitride was optimized to reduce gate current I/sub g/ and to prevent boron penetration in the pFET. The thermal budget in the middle of the line (MOL) process was reduced enough to realize shallower junction depth in the S/D extension regions and to suppress gate poly-Si depletion. Finally, the current drives of 676 /spl mu/A//spl mu/m in nFET and 272 /spl mu/A//spl mu/m in pFET at V/sub dd/=0.85 V (at I/sub off/=100 nA//spl mu/m) were achieved and they are the best values for 35 nm gate length CMOS reported to date.     

α-Sulfonated fatty acid esters: I. Structural effects of sodium α-sulfonated fatty acid higher alcohol esters on surface-active properties and emulsification ability

The surface-active properties and emulsification ability of sodium α-sulfonated fatty acid esters, C_mH_2m+1CH-(SO₃Na)COOC_nH_2n+1, were studied as a function of the hydrophobic alkyl chainlength in the fatty acid (m=8−16) and the alcohol (n=8−18). As a result, it was discovered that sodium α-sulfonated fatty acid esters have a structural effect on the Krafft point different from that of amphiphiles with short alkyl chains. Moreover, some of the α-sulfonated fatty acid esters have quite low interfacial tensions, as well as non-foaming properties, which depend upon the total (m+n) number of carbon atoms in the alkyl chains.     

Two-dimensional multiarray formation of hepatocyte spheroids on a microfabricated PEG-brush surface

A two-dimensional microarray of ten thousand (100 x 100) hepatocyte heterospheroids, underlaid with endothelial cells, was successfully constructed with 100 microm spacing in an active area of 20 x 20 mm on microfabricated glass substrates that were coated with poly(ethylene glycol) brushes. Cocultivation of hepatocytes with endothelial cells was essential to stabilize hepatocyte viability and liver-specific functions, allowing us to obtain hepatocyte spheroids with a diameter of 100 microm, functioning as a miniaturized liver to secret albumin for at least one month. The most important feature of this study is that these substrates are defined to provide an unprecedented control of substrate properties for modulating cell behavior, employing both surface engineering and synthetic polymer chemistry. The spheroid array constructed here is highly useful as a platform of tissue and cell-based biosensors and detects a wide variety of clinically, pharmacologically, and toxicologically active compounds through a cellular physiological response.