Solution‐Processed GaSe Nanoflake‐Based Films for Photoelectrochemical Water Splitting and Photoelectrochemical‐Type Photodetectors

Gallium selenide (GaSe) is a layered compound, which has been exploited in nonlinear optical applications and photodetectors due to its anisotropic structure and pseudodirect optical gap. Theoretical studies predict that its 2D form is a potential photocatalyst for water splitting reactions. Herein, the photoelectrochemical (PEC) characterization of GaSe nanoflakes (single‐/few‐layer flakes), produced via liquid phase exfoliation, for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in both acidic and alkaline media is reported. In 0.5 m H₂SO₄, the GaSe photoelectrodes display the best PEC performance, corresponding to a ratiometric power‐saved metric for HER (Φ_saved,HER) of 0.09% and a ratiometric power‐saved metric for OER (Φ_saved,OER) of 0.25%. When used as PEC‐type photodetectors, GaSe photoelectrodes show a responsivity of ≈0.16 A W^?1 upon 455 nm illumination at a light intensity of 63.5 µW cm^?2 and applied potential of ?0.3 V versus reversible hydrogen electrode (RHE). Stability tests of GaSe photodetectors demonstrated a durable operation over tens of cathodic linear sweep voltammetry scans in 0.5 m H₂SO₄ for HER. In contrast, degradation of photoelectrodes occurred in both alkaline and anodic operation due to the highly oxidizing environment and O₂‐induced (photo)oxidation effects. The results provide new insight into the PEC properties of GaSe nanoflakes for their exploitation in photoelectrocatalysis, PEC‐type photodetectors, and (bio)sensors.     

Application of antimicrobial ice for extending shelf life of fish

In this study, we investigated whether wild-thyme (Thymus serpyllum) hydrosol had a preserving effect against spoilage of freshwater fish. Sensorial characteristics, chemical freshness indicator contents, and microbial counts (total aerobes, psychrotrophics, Enterobacteriaceae, fecal coliform bacteria, Aeromonas spp., and Pseudomonas spp.) of whole ungutted and gutted Transcaucasian barb (Capoeta capoeta capoeta Guldenstaedt, 1772) stored on ice produced from wild-thyme hydrosol and tap water at 4 degrees C for 20 days were compared. The results did not reveal any significant (P > 0.05) differences in the microbial counts, sensorial characteristics, pH, and total volatile basic nitrogen values between gutted and ungutted groups. Sensory evaluation and microbiological and chemical analyses indicated that the storage of the fish on ice produced from wild-thyme hydrosol had a significant increase in shelf life by at least 15 to 20 days.     

Compatibilization of Poly(2,6-dimethyl-l,4-phenylene oxide) and Poly(2,6-dichloro-l,4-phenylene oxide) with Sulfonated Polystyrene and its Na and Zn-neutralized Ionomers

Compatibility of acidic (H), Na, and Zn neutralized sulfonated polystyrene ionomer blends with Poly(2,6-dimethyl- 1,4-phenylene oxide) (PPO) and Poly(2,6-dichloro- 1,4-phenylene oxide) (PDCIPO) was investigated by Dilute Solution Viscometry (DSV) and Differential Scanning Calorimetry (DSC). The intrinsic viscosities of the blends, are measured in suitable solvents. The degree of compatibility of the blends is characterized by Δb parameter. According to the results, PPO is completely miscible, except for Na-neutralized 1.7 mol% sulfonated polystyrene (Na1.7SPS) which is completely immiscible with PPO and PDClPO. PDClPO is completely miscible with Zn-neutralized sulfonated polystyrene (Zn4.8SPS) and partially miscible with acid sulfonated polystyrene (4.8SPS). Received: 12 August 2001/Revised version: 21 January 2002/Accepted: 11 March 2003 Correspondence to Leyla Aras     

Synthesis and characterization of waterborne and phosphorus-containing flame retardant polyurethane coatings

Phosphorus-containing flame retardant water-dispersed polyurethane coatings were produced by incorporating different amounts of a phosphorus compound onto the polyurethane main chain. The novel phosphorus containing compound (phosphorus phenyl dihydroxy) was synthesized in three steps using benzaldehyde, pentaerythritol, phenyl phosphonic dichloride, and acetic acid. The addition of phosphorus phenyl dihydroxy to the main chain of polyurethane, in which NCO/OH ratio was kept constant at 1.5 and the amount of dimethylolpropionic acid (DMPA) at 3.5 wt%, increased the hardness and abrasion resistance, but only slightly decreased the gloss values of the polyurethane paints. All the samples showed superior impact resistance and flexibility. Moreover, increasing the phosphorus content increased the char yield, and the maximum fire retardancy was reached at 1.5% P content with a limiting oxygen index (LOI) value of 29. Kimya B?lümü, 06531 Ankara, Turkey.     

Exergy Analysis of Drying Process: An Experimental Study in Solar Greenhouse

This article examines the exergy variation during drying in solar greenhouses. Exergy efficiencies were derived as functions of drying time and temperature of the drying air. An illustrative example is considered to verify Dincer and Sahin's model and to show the applicability of the model to actual drying processes at different drying air temperatures. This work is intended not only to demonstrate the usefulness of exergy analysis in thermodynamic assessments of drying processes but to provide insights into their performances and efficiencies. In this study, the drying performance of the passively heated solar greenhouse has been investigated. Experimental results under the meteorological conditions of Izmir, Turkey (latitude 38.24 N, longitude 27.50 E), are presented.     

Synthesis and characterization of N‐ and O‐alkylated poly[aniline‐co‐N‐(2‐hydroxyethyl) aniline]

Poly[aniline‐co‐N‐(2‐hydroxyethyl) aniline] was synthesized in an aqueous hydrochloric acid medium with a determined feed ratio by chemical oxidative polymerization. This polymer was used as a functional conducting polymer intermediate because of its side‐group reactivity. To synthesize the alkyl‐substituted copolymer, the initial copolymer was reacted with NaH to obtain the N‐ and O‐anionic copolymer after the reaction with octadecyl bromide to prepare the octadecyl‐substituted polymer. The microstructure of the obtained polymers was characterized by Fourier transform infrared spectroscopy, ¹H‐NMR, and X‐ray diffraction. The thermal behavior of the polymers was investigated by thermogravimetric analysis and differential scanning calorimetry. The morphology of obtained copolymers was studied by scanning electron microscopy. The cyclic voltammetry investigation showed the electroactivity of poly [aniline‐co‐N‐(2‐hydroxyethyl) aniline] and N and O‐alkylated poly[aniline‐co‐N‐(2‐hydroxyethyl) aniline]. The conductivities of the polymers were 5 × 10^?5 S/cm for poly[aniline‐co‐N‐(2‐hydroxyethyl) aniline] and 5 ×10^?7 S/cm for the octadecyl‐substituted copolymer. The conductivity measurements were performed with a four‐point probe method. The solubility of the initial copolymer in common organic solvents such as N‐methyl‐2‐pyrrolidone and dimethylformamide was greater than polyaniline. The alkylated copolymer was mainly soluble in nonpolar solvents such as n‐hexane and cyclohexane. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation of comb‐type grafted hydrogels composed of polyacrylamide and chitosan and their use for DNA adsorption

Comb‐type grafted hydrogels composed of polyacrylamide (PAAm) and chitosan (CT) were prepared and used for DNA adsorption. Instead of direct grafting of the acrylamide monomer onto the CT chain, semitelechelic PAAm with carboxylic acid end groups (PAAm–COOH) was synthesized by free‐radical polymerization with mercaptoacetic acid as the chain‐transfer agent, and it was grafted onto CT with amino groups. The synthesis of telechelic PAAm–COOH and the formation of comb‐type grafted hydrogels were confirmed by attenuated total reflectance/Fourier transform infrared spectroscopy and scanning electron microscopy measurements. The prepared comb‐type grafted hydrogels were used as sorbents in DNA adsorption experiments conducted at +4°C in a tris(hydroxymethyl)aminomethane/ethylenediaminetetraacetic acid solution of pH 7.4. DNA adsorption capacities as high as 2.0 × 10³ μg of DNA/g of dry gel could be achieved by the comb‐type hydrogels with higher PAAm contents. This value was approximately 6 times higher than that of CT alone. In addition, the comb‐type hydrogels showed a high adsorption/desorption rate depending on the PAAm content in the hydrogel. As a result, these comb‐type hydrogels carrying higher amounts of DNA may be considered good candidates for achieving higher removal rates for anti‐DNA antibodies and for effective gene therapy systems. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Electron Microscopy Imaging Applications of Room Temperature Ionic Liquids in the Biological Field: A Review

For biological imaging using electron microscopy (EM), the use of room-temperature ionic liquids (RTILs) has been proposed as an alternative to traditional lengthy preparation methods. With their low vapor pressures and conductivity, RTILs can be applied onto hard-to-image soft and/or wet samples without dehydration – allowing for a more representative, hydrated state of material and opening the possibility for visualization of in situ physiological processes using conventional EM systems. However, RTILs have yet to be utilized to their full potential by microscopists and microbiologists alike. To this end, this review aims to provide a comprehensive summary of biological applications of RTILs for EM to bridge the RTIL, in situ microscopy, and biological communities. We outline future research avenues for the use of RTILs for the EM observation of biological samples, notably i) RTIL selection and optimization, ii) applications for live cell processes and iii) electron beam and ionic liquid interaction studies.     

Effects of pretreatment methods on solubilization of beet-pulp and bio-hydrogen production yield

Sugar processing wastewater and beet-pulp are two major waste streams of sugar-beet processing plants. Contrary to wastewater, beet-pulp is generally used as animal feed in cattle-raising industry. However, it can serve as a substrate for bio-hydrogen production which corresponds to a higher valorization of beet-pulp. Moreover, pretreatment of lignocellulosic materials like beet-pulp is needed in order to improve overall energy efficiency and enable economic feasibility of bio-hydrogen production. Therefore, the effect pretreatment methods (alkaline, thermal, microwave, thermal-alkaline and microwave-alkaline) on bio-hydrogen production from sugar beet-pulp through dark fermentation were investigated in this study. Reactors pretreated with alkaline, microwave-alkaline and thermal-alkaline methods yielded significant solubilization of beet-pulp compared to others. Therefore, in the second phase of the study, they were used to pretreat the beet-pulp which was then subjected to dark fermentation for bio-hydrogen production. Maximum bio-hydrogen production yield of 115.6 mL H₂/g COD was observed in reactor which contained alkaline pretreated beet-pulp.     

Feedback control for multi-resource usage of virtualised database server

Virtualisation and cloud computing have recently received significant attention. Resource allocation and control of multiple resource usages among virtual machines in virtualised data centres remains an open problem. Therefore, in this paper, our focus is to control CPU (central processing unit) usage and memory consumption of a virtual database machine in a data centre under a time-varying heavy workload. In addition to existing work, we attempt to control multiple outputs, such as the CPU usage and memory consumption of a virtualised database server (DBVM), via changing multiple server parameters, such as the CPU allocation and memory allocation, in real time. We indicated that a virtualised database server might be modelled as a linear time-unvarying system. We obtained and compared both MIMO (multi input–multi output) and multiple SISO (single input–single output) models of that system. We designed multiple SISO feedback controllers to achieve desired CPU usages and memory consumptions under workload.