Intrinsic CFRP-metal-hybrids with rubber interface for the improvement of the damping behaviour

This paper presents an integrated passive damping approach in hybrid metal-CFRP parts for structural applications. In this concept a viscoelastic material is embedded in the joint zone of the hybrid component. To examine the connection strength single-lap-joint specimens were produced and tested and the influence of the used material combinations, different surface structures, and different process parameters i.e. the moment of cross-linking were evaluated. Afterwards, the metal-CFRP hybrids were tested in quasi-static tests to assess their connection strength and failure behaviour. Dynamic cyclic tensile tests with step-wise increased loading conditions were performed to determine the specimens damping behaviour and to estimate their fatigue performance. Finally, these results are compared to a state of the art metal-CFRP hybrid with rivets connecting both materials.     

Matrix Transformation in Boron Containing High-Temperature Co–Re–Cr Alloys

An addition of boron largely increases the ductility in polycrystalline high-temperature Co–Re alloys. Therefore, the effect of boron on the alloy structural characteristics is of high importance for the stability of the matrix at operational temperatures. Volume fractions of ε (hexagonal close-packed—hcp), γ (face-centered cubic—fcc) and σ (Cr₂Re₃ type) phases were measured at ambient and high temperatures (up to 1500 °C) for a boron-containing Co–17Re–23Cr alloy using neutron diffraction. The matrix phase undergoes an allotropic transformation from ε to γ structure at high temperatures, similar to pure cobalt and to the previously investigated, more complex Co–17Re–23Cr–1.2Ta–2.6C alloy. It was determined in this study that the transformation temperature depends on the boron content (0–1000 wt. ppm). Nevertheless, the transformation temperature did not change monotonically with the increase in the boron content but reached a minimum at approximately 200 ppm of boron. A probable reason is the interplay between the amount of boron in the matrix and the amount of σ phase, which binds hcp-stabilizing elements (Cr and Re). Moreover, borides were identified in alloys with high boron content.     

Stream Classification System Based on Susceptibility to Algal Growth in Response to Nutrients

We developed a stream classification system that is based on stream’s susceptibility to algal growth using a two-step approach. The model portrays algal biomass as a result of stream’s response to nutrient concentrations and the response is governed by various stream factors. In the first step, a nutrient-chlorophyll a relationship was developed to characterize nutrient’s effects on algal biomass. Residuals of the relationship were attributed to stream’s susceptibility to algal growth in response to nutrients and referred to as “observed” susceptibility. In the second step, conditions of other contributing factors were used to explain the variation in the residuals and the developed relationship was used to generate “predicted” susceptibility. Existing data compiled from various monitoring projects of Illinois streams and rivers were used to illustrate the approach. Streams were classified into three (high, medium, and low) categories based on their observed and predicted susceptibility values, respectively. With the available data, the model showed a 40-50% success rate for classifying the streams based on three observed and predicted susceptibility categories. Model entropy also was calculated for selecting the best model. The results show the important role of both nutrients and other contributing factors in explaining the variation of algal biomass. The study also suggests ways to fine tune the model and improve its accuracy, which would make the presented model a more viable tool for stream classification for establishing nutrient criteria to prevent surface streams from eutrophication.     

Phase Equilibria in the Quaternary System Ti-Al-C-N

The quaternary system Ti-Al-C-N and its binary and ternary boundary systems are investigated using powder methods and XRD analysis. Phase equilibria at 1375°C are presented in an isothermal network for alloys up to 50 at.% Ti. In the vertical section Ti₂AIC_1-x-Ti₂AlN_1-x a complete series of solid solutions exists at 1495°C, but a wide miscibility gap occurs at 1375°C. The vertical section Ti₃AlC_1-x-Ti₃AlN_1-x is more complex because of the occurrence of the quaternary, tetragonally distorted phase Ti₃Al(C,N)_1-x ( a = 0.41135(4) nm, c = 0.41366(5) nm) and the transformation of perovskite-type Ti₃AlN_1-x into filled Re₃B-type Ti₃AlN_1-x below 1200°C.     

Work-oriented development of knowledge-based systems: a case for multiple perspectives

System development is strongly influenced by the perspectives used by system developers. Current development methods for knowledge-based systems are based on an information processing perspectives of experts and users which has been criticized by a number of researchers. The paper argues that work-oriented development of knowledge-based systems requires the parallel use of multiple perspectives (including the information processing perspective), and that the use of any single perspective is potentially dangerous. As an example of the importance of using multiple perspectives, thepaper presents the situated action perspective, and shows how it complements the information processing perspective.     

The vulnerability of geometric sequences based on fields of odd characteristic

A new method of cryptologic attack on binary sequences is given, using their linear complexities relative to odd prime numbers. We show that, relative to a particular prime number p, the linear complexity of a binary geometric sequence is low. It is also shown that the prime p can be determined with high probability by a randomized algorithm if a number of bits much smaller than the linear complexity is known. This determination is made by exploiting the imbalance in the number of zeros and ones in the sequences in question, and uses a new statistical measure, the partial imbalance.This project was sponsored by the National Security Agency under Grant No. MDA904-91-H-0012. The United States Government is authorized to reproduce and distribute reprints notwithstanding any copyright notation hereon.