Ionization coefficient of monolayer graphene nanoribbon

A semi-analytical model for impact ionization coefficient of graphene nanoribbon (GNR) is presented. The model is derived by calculating probability of electrons reaching ionization threshold energy E_t and the distance travelled by electron gaining E_t. In addition, ionization threshold energy is semi-analytically modelled for GNR. During modelling, we justify our assumptions using analytical modelling and comparison with simulation. Furthermore, it is shown that conventional silicon models are not valid for calculation of ionization coefficient of GNR. Finally, the profile of ionization is presented using the proposed models and the results are compared with that of silicon.     

Fault detection in analogue circuits using hybrid evolutionary algorithm and neural network

With the development of analog integrated circuits technology and due to the complexity, and various types of faults that occur in analog integrated circuits, fault detection is a new idea, has been studied in recent decades. In this paper a three amplifier state variable filter is used as circuit under test (CUT) and, a hybrid neural network is proposed for soft fault diagnosis of the CUT. Genetic algorithm (GA) has the powerful ability of searching the global optimal solution, and back propagation (BP) algorithm has the feature of rapid convergence on the local optima. The hybrid of two algorithm will improve the evolving speed of neural network. GA-BP scheme adopts GA to search the optimal combination of weights in the solution space, and then uses BP algorithm to obtain the accurate optimal solution quickly. Experiment results show that the proposed GA-BP scheme is more efficient and effective than BP algorithm.     

SEOTP: a new secure and efficient ownership transfer protocol based on quadric residue and homomorphic encryption

Wireless Networks - In systems equipped with radio frequency identification (RFID) technology, several security concerns may arise when the ownership of a tag should be transferred from one owner...     

Investigating the effect of zirconium-based and titanium-based metal–organic frameworks nanoparticles on the performance of polysulfone hollow fiber mixed matrix membrane for dialysis application

This study aims to investigate polysulfone (PSF) mixed matrix membranes (MMMs) properties containing zirconium-based and titanium-based metal–organic frameworks (MOFs). for hemodialysis application. The nanoparticles were synthesized, and the membranes were produced by the phase inversion method. Membrane characterization conducted by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), field emission Scanning electron microscope (FE-SEM), energy-dispersive x-ray analysis (EDX), transmission electron microscopy (TEM), x-ray diffraction (XRD), and atomic force microscopy (AFM) confirmed the presence of MOF nanoparticles. Also, the evaluation of the specific surface area of nanoparticles was done by BET. The water contact angle reduced from 64.4° to 51.2°, indicating the hydrophilicity improvement, enhancing the pure water flux from 46.8 L/m²h for the pristine membrane to 76.7 L/m2h for the pristine membrane M₄. The total fouling resistance decreased from 30% to 21%, and the bovine serum albumin (BSA) adsorption of modified membranes was lower than that of the pristine membrane. Urea and creatinine were cleared significantly for modified ones, up to 82.6% and 72.1%, respectively, and all membranes showed BSA retention of more than 93%. A comparison between MMMs that contained UIO-66-NH₂ and MIL-125-NH₂ showed that the former had a better effect on the performance. M₄ had better results, indicating high water flux, the lowest fouling resistance, high porosity, lower BSA adsorption, proper clearance for urea and creatinine, and 94.2% BSA retention.     

Experimental Study and Mathematical Modeling of NO Removal Using the UV/H2O2 Advanced Oxidation Process

An experimental study on NO removal via UV/H₂O₂ process was conducted in a semi‐continuous bubble‐column reactor and the effect of some operation parameters including NO initial concentration and gas flow rates on removal efficiency was investigated. Applying UV light increased the efficiency significantly. The steady‐state removal efficiency was found to be higher at the lower gas flow rates. The bubble size as an important factor in mass transfer calculations and modeling procedure was determined at different gas flow rates using bubble photographs and image processing technique. In the ranges of flow rates studied here, the gas flow rate had no significant effect on the bubble diameter. A mathematical model was developed to describe the NO removal process. The model predictions were compared with existing experimental data, confirming a good agreement of the data.     

Polyvinylpolypyrrolidone-Supported Chlorosulfonic Acid: An Efficient Catalyst for One-Pot Synthesis of Dihydropyrimidinones and Octahydroquinazolin-2,5-diones

Polyvinylpolypyrrolidone-supported chlorosulfonic acid has been successfully applied to perform one-pot reaction of arylaldehydes, urea, ethylacetoacetate, or cyclic 1,3-diketo compounds under solvent-free condition at 70°C to provide a series of dihydropyrimidinones and octahydroquinazolin-2,5-diones in good to excellent yields. The method offers several advantages such as high yield, short reaction time, simple workup, easy preparation, and reusability of the catalyst. The [PVPP-SO₃H]⁺Cl^? catalyst was characterized via Fourier transform infrared spectroscopy (FT-IR) and thermal gravimetric analysis (TGA). Moreover, the catalyst could be recycled several times without significant loss of its catalytic activity. Clean methodologies, easy work-up procedure, high yield, and simple preparation of the catalyst are some advantages of this article.     

Glassy carbon electrodes modified with a film of nanodiamond-graphite/chitosan: Application to the highly sensitive electrochemical determination of Azathioprine

A novel modified glassy carbon electrode with a film of nanodiamond-graphite/chitosan is constructed and used for the sensitive voltammetric determination of azathioprine (Aza). The surface morphology and thickness of the film modifier are characterized using atomic force microscopy. The electrochemical response characteristics of the electrode toward Aza are investigated by means of cyclic voltammetry. The modified electrode showed an efficient catalytic role for the electrochemical reduction of Aza, leading to a remarkable decrease in reduction overpotential and enhancement of the kinetics of the electrode reaction with a significant increase of peak current. The effects of experimental variables, such as the deposited amount of modifier suspension, the pH of the supporting electrolyte, the accumulation potential and time were investigated. Under optimal conditions, the modified electrode showed a wide linear response to the concentration of Aza in the range of 0.2-100 μM with a detection limit of 65 nM. The prepared modified electrode showed several advantages: simple preparation method, high stability and uniformity in the composite film, high sensitivity, excellent catalytic activity in physiological conditions and good reproducibility. The modified electrode can be successfully applied to the accurate determination of trace amounts of Aza in pharmaceutical and clinical preparations.