Formulation of sage essential oil (Salvia officinalis,L.) monoterpenes into chitosan hydrogels and permeation study with GC-MS analysis

This study deals with the formulation of natural drugs into hydrogels. For the first time, compounds from the sage essential oil were formulated into chitosan hydrogels. A sample preparation procedure for hydrophobic volatile analytes present in a hydrophilic water matrix along with an analytical method based on the gas chromatography coupled with the mass spectrometry (GC-MS) was developed and applied for the evaluation of the identity and quantity of essential oil components in the hydrogels and saline samples. The experimental results revealed that the chitosan hydrogels are suitable for the formulation of sage essential oil. The monoterpene release can be effectively controlled by both chitosan and caffeine concentration in the hydrogels. Permeation experiment, based on a hydrogel with the optimized composition [3.5% (w/w) sage essential oil, 2.0% (w/w) caffeine, 2.5% (w/w) chitosan and 0.1% (w/w) Tween-80] in donor compartment, saline solution in acceptor compartment, and semi-permeable cellophane membrane, demonstrated the useful permeation selectivity. Here, (according to lipophilicity) an enhanced permeation of the bicyclic monoterpenes with antiflogistic and antiseptic properties (eucalyptol, camphor and borneol) and, at the same time, suppressed permeation of toxic thujone (not exceeding its permitted applicable concentration) was observed. These properties highlight the pharmaceutical importance of the developed chitosan hydrogel formulating sage essential oil in the dermal applications.     

Evaluation of microbial toxins,trace elements and sensory properties of a high-theabrownins instant Pu-erh tea produced using Aspergillus tubingensis via submerged fermentation

Theabrownins (TB) are polymeric phenolic compounds associated with the multiple bioactivities of Pu-erh tea, a post-fermented Chinese dark tea. High-TB instant Pu-erh tea was produced via a novel submerged fermentation (SF) using Aspergillus tubingensis and compared with samples produced commercially via the conventional solid-state fermentation (SSF). Viable microorganisms and microbial toxins, especially aflatoxins B₁, G₁, B₂, G₂, cyclopiazonic acid, fumonisins B₁, B₂, B₃ and ochratoxin A, were below the detection limit in all samples. Fewer microbial metabolites were found in SF instant tea compared with the SSF teas. Based on an adult consuming 1 g of instant Pu-erh tea daily, the dietary intake of investigated elements was below the safe limits recommended by various authorities. Tasters viewed the instant tea infusions as very mild, smooth, mellow and full. This suggested that submerged fermentation using A. tubingensis offers a speedy and safe alternative to commercial production of instant Pu-erh tea.     

Asymptotic stress intensity factor density profiles for smeared-tip method for cohesive fracture

The paper presents a computational approach and numerical data which facilitate the use of the smeared-tip method for cohesive fracture in large enough structures. In the recently developed K-version of the smeared tip method, the large-size asymptotic profile of the stress intensity factor density along a cohesive crack is considered as a material characteristic, which is uniquely related to the softening stress-displacement law of the cohesive crack. After reviewing the K-version, an accurate and efficient numerical algorithm for the computation of this asymptotic profile is presented. The algorithm is based on solving a singular Abel's integral equation. The profiles corresponding to various typical softening stress-displacement laws of the cohesive crack model are computed, tabulated and plotted. The profiles for a certain range of other typical softening laws can be approximately obtained by interpolation from the tables. Knowing the profile, one can obtain with the smeared-tip method an analytical expression for the large-size solution to fracture problems, including the first two asymptotic terms of the size effect law. Consequently, numerical solutions of the integral equations of the cohesive crack model as well as finite element simulations of the cohesive crack are made superfluous. However, when the fracture process zone is attached to a notch or to the body surface and the cohesive zone ends with a stress jump, the solution is expected to be accurate only for large-enough structures.     

Josephson junction with an amorphous silicon barrier

A Josephson junction Nb/Si/Nb with a 10 nm thick amorphous silicon barrier is studied. The upper electrode contains a 2 nm thick sublayer of amorphous phase adjacent to the barrier, as revealed by cross-sectional TEM. Thus, the junction can be considered as a S-I-N-S system with the N layer represented by amorphous niobium. Peculiarities in the I–V and Δ(T) dependencies are observed and explained as a consequence of a proximity effect present in the upper electrode.     

Electropolymerization of chlorinated phenols on a Pt electrode in alkaline solution. Part II: An electrochemical quartz crystal microbalance study

Electropolymerization of phenol and mono-, di-, tri-, pentachlorophenols was studied using EQCM on a Pt electrode at 0.78 V (SHE) in 1 M NaOH solution containing 0.1 M of the corresponding phenol. The highest electropolymerization rate was found for ortho-substituted chlorophenols indicating a weak fouling of the electrode. Low electropolymerization rates for para-substituted chlorophenols suggest a low permeability of the polymer film, resulting in rapid electrode fouling. The EQCM data suggest that electropolymerization of chlorophenols occurs without Cl-elimination for the monomers with unsubstituted ortho and para positions. Dechlorination is most pronounced for electropolymerization of para-substituted isomers. The mechanism of electropolymerization of chlorophenols is discussed.     

Deposition of CoO onto MoO3/Al2O3 hydrodesulfurization catalysts by solvent assisted spreading

Solvent assisted spreading of CoO over monolayer MoO₃/Al₂O₃ catalysts has been studied. CoCO₃ · Co(OH)₂ and CoCO₃ reacted with MoO₃/Al₂O₃ in water slurries. CoO deposition over MoO₃/Al₂O₃ extrudates was followed by EPMA. In the set of eleven MoO₃/Al₂O₃ catalysts, the amount of CoO adsorbed was roughly proportional to the surface area of MoO₃ monolayer. The adsorbed Co species efficiently enhanced the HDS activity.     

Dissecting the protocol and network traffic of the OnLive cloud gaming platform

Cloud gaming is a new paradigm that is envisaged to play a pivotal role in the video game industry in forthcoming years. Cloud gaming, or gaming on demand, is a type of online gaming that allows on-demand streaming of game content onto non-specialised devices (e.g. PC, smart TV, etc.). This approach requires no downloads or game installation because the actual game is executed on the game company’s server and is streamed directly to the client. Nonetheless, this revolutionary approach significantly affects the network load generated by online games. As cloud gaming presents new challenges for both network engineers and the research community, both groups need to be fully conversant with these new cloud gaming platforms. The purpose of this paper is to investigate OnLive, one of the most popular cloud gaming platforms. Our key contributions are: (a) a review of the state-of-the-art of cloud gaming; (b) reverse engineering of the OnLive protocol; and (c) a synthetic traffic model for OnLive.