Evidence of flexoelectricity in polymer-dispersed liquid crystals

The linear electro-optic response of polymer-dispersed liquid crystal films has been studied. Micrometer-sized droplets of a cyanobiphenyl mixture (E7) were formed in a Norland Optical Adhesive 65 photopolymer by photopolymerization-induced phase separation. Samples with various average nematic droplet sizes were systematically investigated. The temperature dependence of the first-harmonic electro-optic spectra was obtained. Peculiar peaks and double peaks in the phase spectra were found at temperatures close to the clearing point. Samples with narrow distributions of droplet sizes were characterized by a double peak of the amplitude spectra in the low-frequency range. A flexoelectric origin of the first-harmonic spectra in confined nematic systems is discussed.     

Optical study of Ge x Sb20−x Te80 chalcogenide films

The optical properties of Ge _x Sb_20?x Te₈₀ films with x values of 15, 17, and 19, lying in the glass-forming region of the Ge–Sb–Te system, have been studied by spectroscopic ellipsometry in the spectral range 300–820 nm. The refractive index values were found to be 1.2–5.5 in the spectral range studied. With increasing Ge content in the films, a shift of the absorption edge toward higher energies was observed. This corresponds to an increase in the optical bandgap energy, from 0.58 to 0.76 eV.     

Production of phosphoric acid with low content of impurities

The present work is to study the possibility for controlled distribution of the impurities when they are decomposed by sulphuric acid to wet phosphoric acid and phosphogypsum, as well as generating technological conditions for production of clean wet phosphoric acid and its derivatives - phosphoric fertilizers, food phosphates and other phosphoric products.A coefficient of distribution D_A is introduced as a general criterion for elements dispersion. The study includes relationships between the weight ratio sulphuric acid/natural phosphate and D_A; the period of decomposition and D_A; the particle's size content of the natural phosphate and D_A. The obtained experimental data and relationships about the influence of the above discussed technological parameters on dispersion of more than 23 elements allow for control of that process in wet phosphoric acid and phosphogypsum by selecting specific technological conditions. Thus, depending on the requirements of acid's consumers and procedures for secondary processing of phosphogypsum to end-products, a selective decomposition of the natural phosphates to phosphoric acid and phosphogypsum can be carried out with content of the impurities in those products varying in narrow limits.     

Investigation of conductivity characteristics of nitrile butadiene rubber vulcanizates filled with semiconducting carbide ceramic

SiC‐ and B₄C‐filled NBR rubber composites were prepared with various volume fractions of filler by a conventional roll‐mill method. The morphological structures of the NBR–SiC and NBR–B₄C composites were analyzed by scanning electron microscopy. The dependence of room‐temperature volume resistivity (ρ_v) on the concentration of filler in the two systems was studied. In addition, variation in the number of current carriers (n), mobility carriers (μ), dielectric constant (ε), and dielectric loss factor (tan δ) on filler concentration in the two systems were investigated in detail. The applicability of composites as negative temperature coefficient (NTCR) linear thermistors was studied by the dependence of volume resistivity on temperature. The resistivity showed negative temperature dependence and changed linearly with temperature parallel. The conduction mechanism of the conductivity of the two composites was analyzed in terms of the computed activation energy and hopping energy. Change in volume resistivity as a function of frequency for the two systems was also investigated. Finally, the dependence of volume resistivity on applied pressure and possible real applications of these composites as transducers in pressure sensors were also studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2158–2165, 2007     

Contamination and Ecological Risk Assessment of Long-Term Polluted Sediments with Heavy Metals in Small Hydropower Cascade

The identification of contamination level and ecological risks, associated with heavy metal pollution of sediments in small hydropower cascade was done on the base of index analyses approach. The concentration of As, Cd, Cu, Hg, Pb, Zn, total organic carbon and percentage of fines were determined in sediments of two habitats in cascade sequence – river and dam. Correlation and multivariate analyses suggest that As, Cu, Pb and Zn are associated with similar anthropogenic source. Cadmium and mercury originate from different source and have specific moving. Based on the contamination and background indices the sediments in Middle Iskar cascade are moderate contaminated at least and are subject of intensive hydrological and technological mixing. The potential ecological risk index (PERI) classifies the sediments in dam site with the higher risk level. Suitable indicators for express assessment of metal pollution in “river” sediments are contamination/enrichment indices which are more sensitive for local concentration increase of less toxic metals. In “dam” sites the process of sedimentation affects strongly the degree of metals accumulation and differences in toxicity are clearly presented – PER/PERI in combination with content of fine sediment fractions and TOC have a potential for rapid identification of sediment-associated risks.     

Poly(3-hydroxybutyrate)-based hybrid materials with photocatalytic and magnetic properties prepared by electrospinning and electrospraying

Several types of nanostructured hybrid fibrous materials containing poly(3-hydroxybutyrate), nanoparticles from iron oxide (Fe₃O₄) and titanium dioxide (TiO₂), and chitosan or chitosan oligosaccharides (COS) were prepared. The design of the surface of the materials and their magnetic properties were tailored purposefully by conjunction of electrospinning and electrospraying. The surface and bulk morphologies of the obtained nanostructured materials were examined by SEM. Further, the distribution of Fe₃O₄ and TiO₂ nanoparticles was estimated by TEM analyses, as well as their surface chemical composition was determined by XPS. It was found that the simultaneous electrospinning and electrospraying of Fe₃O₄/chitosan or TiO₂/COS dispersions resulted in uniform distribution of the nanoparticles along the length of the fibers, while electrospraying of the mixed Fe₃O₄/TiO₂/chitosan dispersion led to agglomerate formation. Furthermore, the nanostructured hybrid materials preserved the magnetic properties of Fe₃O₄ embedded therein. It was demonstrated that the hybrid materials of different designs displayed excellent photocatalytic activity under UV light irradiation against a model organic contaminant—methylene blue, even after threefold use of the materials.     

Anti-Idiotype scFv Localizes an Autoepitope in the Globular Domain of C1q

We addressed the issue of C1q autoantigenicity by studying the structural features of the autoepitopes recognized by the polyclonal anti-C1q antibodies present in Lupus Nephritis (LN) sera. We used six fractions of anti-C1q as antigens and selected anti-idiotypic scFv antibodies from the phage library “Griffin.1”. The monoclonal scFv A1 was the most potent inhibitor of the recognition of C1q and its fragments ghA, ghB and ghC, comprising the globular domain gC1q, by the lupus autoantibodies. It was sequenced and in silico folded by molecular dynamics into a 3D structure. The generated 3D model of A1 elucidated CDR similarity to the apical region of gC1q, thus mapping indirectly for the first time a globular autoepitope of C1q. The V_H CDR2 of A1 mimicked the ghA sequence GSEAD suggested as a cross-epitope between anti-DNA and anti-C1q antibodies. Other potential inhibitors of the recognition of C1q by the LN autoantibodies among the selected recombinant antibodies were the monoclonal scFv F6, F9 and A12.     

Heterologous Expression and Partial Characterization of a Putative Opine Dehydrogenase from a Metagenomic Sequence of Desulfohalobium retbaense

The aim of this research was to prove the function of the putative opine dehydrogenase from Desulfohalobium retbaense and to characterize the enzyme in terms of functional and kinetic parameters. A putative opine dehydrogenase was identified from a metagenomic library by a sequence-based technique search of the metagenomic library, and afterward was successfully heterologously produced in Escherichia coli. In order to examine its potential for applications in the synthesis of secondary amines, first the substrate specificity of the enzyme towards different amino donors and amino acceptors was determined. The highest affinity was observed towards small amino acids, preferentially L-alanine, and when it comes to α-keto acids, pyruvate proved to be a preferential amino acceptor. The highest activity was observed at pH 6.5 in the absence of salts. The enzyme showed remarkable stability in a wide range of experimental conditions, such as broad pH stability (from 6.0–11.0 after 30 min incubation in buffers at a certain pH), stability in the presence of NaCl up to 3.0 M for 24 h, it retained 80 % of the initial activity after 1 h incubation at 45 °C, and 65 % of the initial activity after 24 h incubation in 30 % dimethyl sulfoxide.     

Resource management in LEO satellite networks

To provide truly global coverage needed by increased Personal Communication Services (PCS), a new generation of mobile satellite networks has been proposed. These low Earth orbit (LEO) mobile satellite networks handle multimedia traffic and can be used for non-real-time as well as real-time service to remote areas. Due to the many handoffs, resource management and connection admission control are important tasks for fair bandwidth sharing and QoS guarantees. Because the total link capacity has to be divided among several carriers and given the limited buffer capacity of the ATM switch, resource management is vital. It ensures the ability of the network to provide users with their negotiated QoS while protecting the network and the end-systems from congestion. We introduced a simple connection admission control (CAC) priority policy based on the delay and cell loss requirements for the investigated types of traffic. We took into account the handoff status of the satellite beams involved. Thus, we propose an onboard buffer architecture with separated buffers for new calls and intra-satellite handoff calls. The priority scheme applied is as follows: highest priority is given to CBR, followed by rt-VBR, nrtVBR and ABR.