The hydrogenation of triglycerides using supported alloy catalysts. I. Silica-supported Ni—Ag catalysts

Silica-supported Ni-Ag catalysts with a loading of 2·1·0.6% (w/w) total metal have been prepared using the precursors nickel dimethylglyoxime and silver nitrate by means of a simple impregnation method. The resulting catalysts were activated by calcination at 260°C in air, followed by hydrogen reduction at 450°C. They were then employed for soyabean oil hydrogenation at 1 bar H2 pressure and 160°C in a stirred batch reactor. Characterisation of the catalysts using temperature-programmed reduction and electron microscopy indicated that alloying of nickel and silver had occurred, but metal particle composition, for a given overall composition, varied with metal particle size and smaller metal particles were nickel rich. The hydrogenation activity and selectivity measurements revealed that the catalysts were more active and selective than a commercial nickel catalyst. Furthermore, the specific activities of the alloy catalysts were a maximum for alloys in the range 70–90 at. % Ni. However, the supported alloy catalysts also gave rise to greater trans isomerisation than the commercial catalyst. This is attributed to hydrogen deficiency caused by large triglyceride molecules blocking hydrogen chemisorption on small nickel particles (10–50 Å in diameter), leading to enhanced cis-trans isomerisation.     

Stiffness of trabecular bone of the tibial plateau in patients with rheumatoid arthritis of the knee

Stiffness of subchondral proximal tibial trabecular bone is a factor in the stability of prostheses implanted into that bone. The stiffness of trabecular bone in osteoarthritis (OA) has been documented. Trabecular bone in rheumatoid arthritis (RA) is osteopenic in numerous sites and morphologically abnormal in the proximal tibia. Reliable data on proximal tibial bone in RA are lacking, although 1 study failed to identify abnormalities. The purposes of this study were (1) to document the stiffness of the proximal tibial cancellous bone in patients with RA, (2) to determine the effect of angular deformity on bone stiffness in rheumatoid patients, and (3) to compare RA stiffness values with those in published reports for OA. Fifteen tibial plateau were obtained from patients with RA during surgery. Each plateau was horizontally seated in a mold and covered with cement. The plateau was divided into 6 regions, which were used to facilitate comparison between specimens and the existing literature. Indentation tests were conducted with a 4-mm-diameter cylindrical indentor controlled by an MTS machine. The indentor descended at a rate of 2 mm/min to a maximum depth of 1.0 mm; load and displacement data were digitally recorded. Stiffness was calculated from the slope of the linear region of the curve using best-fit linear regression. Where varus deformity was present, stiffness in the medial plateau was higher overall than for the other compartment; whereas in the case of valgus deformity, stiffness of the lateral side was significantly higher (P < .05 for each observation). In comparison to older normal specimens, both the medial compartment of the varus RA specimens (P < .01) and the posterolateral compartment of the valgus RA specimens (P < .01) had significantly lower stiffness. Comparison with OA specimens showed that in varus RA, the posteromedial region had significantly lower stiffness than in varus OA at the same site (P < .01). In valgus RA, the lateral region had significantly lower stiffness than in valgus OA at the same site (P < .01). The mean stiffness ratio of the valgus RA was significantly (P < .01) altered from normal, and for the varus RA, it was significantly (P < .01) different from normal posteriorly. The stiffness ratios for the varus RA were significantly (P < .01) different from those for varus OA; there was no difference between valgus RA and valgus OA. It is concluded that RA affected bone has significantly lower stiffness than normal and osteoarthritic bone. The loaded plateau is stiffer than the unloaded plateau in angular deformity, but is still less stiff than normal bone and osteoarthritic plateaus with corresponding deformities.     

Lipolysis of trivernolin by pancreatic lipase

Vernolic acid (cis-12,13-epoxy-cis-9-oetadece-noic acid) occurs as the triglyceride in the seed ofVernonia anthelmintica. Incubation of the seed produces a 1,3-divernolin. To determine whether the structure of trivernolin is responsible for the apparent secondary ester position specificity of the natural enzyme, trivernolin and tri-olein, were incubated with pancreatic lipase and the free fatty acids and monoglycerides were determined after 5 and 15 min digestion periods. The preponderance of 2-monoglyceride produced by the action of pancreatic lipase was interpreted to indicate that the structure of trivernolin was not solely responsible for the secondary position specificity of theV. anthelmintica lipase toward trivernolin.     

Differences in detection of alcohol use in a prenatal population (on a Northern Plains Indian Reservation) using various methods of ascertainment

Although Fetal Alcohol Syndrome (FAS) rates have been reported to be higher in American Indian populations, no screening tool has been validated for alcohol use in American Indian women. The objectives of this study were to compare the detection of prenatal alcohol use by a self-administered questionnaire to detection by clinical interview; and to ascertain whether the screening tool would increase detection of pregnant women who are abusing alcohol. The hospital records of the women were reviewed for any history of alcohol-related illnesses or injuries to compare with results obtained from the questionnaire. Seventy women attending their first prenatal clinic visit on a reservation were screened for alcohol use. There was a wide range in detection of prenatal alcohol use (20%-71% of the sample detected) depending on the method used. There was a large variation in sensitivities (7%-93%) of the individual questions in identifying patients detected as "high risk" by the clinicians. The T-ACE screening questions significantly increased detection of alcohol use compared to detection by the clinicians (p = 0.04 Fisher's exact test). Due to the large variation between different methods of detection, it is recommended that screening tools that increase detection of alcohol use should be combined with methods of higher specificity such as using questions about quantity and frequency of alcohol intake, medical chart review and clinical interview. We also found that various interpretations of the screening questions by the patients highlighted the need to tailor the wording of individual questions to the particular patient population.     

High-speed integrated transceivers for optical wireless

Optical wireless LANs have the potential to provide bandwidths far in excess of those available with current or planned RF networks. There are several approaches to implementing optical wireless systems, but these usually involve the integration of optical, optoelectronic, and electrical components in order to create transceivers. Such systems are necessarily complex, and the widespread use of optical wireless is likely to be dependent on the ability to fabricate the required transceiver components at low cost. A number of UK universities are currently involved in a project to demonstrate integrated optical wireless subsystems that can provide line-of-sight in-building communications at 155 Mb/s and above. The system uses two-dimensional arrays of novel microcavity LED emitters and arrays of detectors integrated with custom CMOS integrated circuits to implement tracking transceiver components. In this article we set out the basic approaches that can be used for in-building optical wireless communication and argue the need for an integrated and scalable approach to the fabrication of transceivers. Our work aimed at implementing these components, including experimental results and potential future directions, is then discussed.