Environmental Implications of Treatment of Coastal Sewage Discharges

The environmental implications of implementing the requirement for treatment of coastal sewage prior to discharge, which were put forward in an EC draft Directive on municipal waste-water treatment, are examined. In order to establish the current situation, the results of a national survey of coastal and estuarine sewage discharges are presented. A review of the impact of sewage discharges on the marine environment is presented in conjunction with an assessment of the impact of sewage-treatment processes on the land and in the air. These aspects are integrated into overall conclusions about net environmental impact. Finally, a decision-tree approach to the assignment of priority to additional action required at individual locations is developed.     

High-Throughput Strategies for the Design,Discovery, and Analysis of Bismuth-Based Photocatalysts

Bismuth-based nanostructures (BBNs) have attracted extensive research attention due to their tremendous development in the fields of photocatalysis and electro-catalysis. BBNs are considered potential photocatalysts because of their easily tuned electronic properties by changing their chemical composition, surface morphology, crystal structure, and band energies. However, their photocatalytic performance is not satisfactory yet, which limits their use in practical applications. To date, the charge carrier behavior of surface-engineered bismuth-based nanostructured photocatalysts has been under study to harness abundant solar energy for pollutant degradation and water splitting. Therefore, in this review, photocatalytic concepts and surface engineering for improving charge transport and the separation of available photocatalysts are first introduced. Afterward, the different strategies mainly implemented for the improvement of the photocatalytic activity are considered, including different synthetic approaches, the engineering of nanostructures, the influence of phase structure, and the active species produced from heterojunctions. Photocatalytic enhancement via the surface plasmon resonance effect is also examined and the photocatalytic performance of the bismuth-based photocatalytic mechanism is elucidated and discussed in detail, considering the different semiconductor junctions. Based on recent reports, current challenges and future directions for designing and developing bismuth-based nanostructured photocatalysts for enhanced photoactivity and stability are summarized.     

Friction and wear behavior of graphite fiber-reinforced composites

Friction and wear behavior of continuous graphite fiber composites was studied for different fiber orientations against the sliding direction. The effect of fiber orientation on friction and wear of the composite and on deformation of the counterface was investigated experimentally. A pin on disk type testing machine was built and employed to generate friction and wear data. A graphite fiber composite plate was produced by the bleeder ply molding in an autoclave and machined into rectangular pin specimens with specific fiber orientations, i.e., normal, transverse, and longitudinal directions. Three different wear conditions were employed for two different periods of time, 24 and 48 hours. The wear track of the worn specimens and the metal counterface was examined and a scanning electron microscope (SEM) to observe the damaged fibers on the sliding surface of the specimen and wear film generation on the counterface. A wear mechanism of the continuous graphite fiber composite during sliding wear is proposed based on the experimental results.     

A Fully-Human Antibody Specifically Targeting a Membrane-Bound Fragment of CADM1 Potentiates the T Cell-Mediated Death of Human Small-Cell Lung Cancer Cells

Small-cell lung cancer (SCLC) is the most aggressive form of lung cancer and the leading cause of global cancer-related mortality. Despite the earlier identification of membrane-proximal cleavage of cell adhesion molecule 1 (CADM1) in cancers, the role of the membrane-bound fragment of CAMD1 (MF-CADM1) is yet to be clearly identified. In this study, we first isolated MF-CADM1-specific fully human single-chain variable fragments (scFvs) from the human synthetic scFv antibody library using the phage display technology. Following the selected scFv conversion to human immunoglobulin G1 (IgG1) scFv-Fc antibodies (K103.1–4), multiple characterization studies, including antibody cross-species reactivity, purity, production yield, and binding affinity, were verified. Finally, via intensive in vitro efficacy and toxicity evaluation studies, we identified K103.3 as a lead antibody that potently promotes the death of human SCLC cell lines, including NCI-H69, NCI-H146, and NCI-H187, by activated Jurkat T cells without severe endothelial toxicity. Taken together, these findings suggest that antibody-based targeting of MF-CADM1 may be an effective strategy to potentiate T cell-mediated SCLC death, and MF-CADM1 may be a novel potential therapeutic target in SCLC for antibody therapy.     

Coating of TiO2 nanoparticles with PbS thin films and preparation of PbS nanoparticles using a one-pot sonochemical reaction under the multibubble sonoluminescence conditions

Preparations of PbS-coated titanium dioxide (TiO₂) and lead sulfide (PbS) nanoparticles under ultrasonic field at the multibubble sonoluminescence (MBSL) conditions were tested in water solutions. Under the optimal MBSL conditions (20 kHz and 220 W power input), PbS nanoparticles (diameter = 40-50 nm) were prepared by treating lead nitrate and thioacetamide for 20 min in water solutions. The size of PbS nanoparticles was found to be easily increased to about 90 nm in diameter by increasing the reactant concentration twice. A similar sonochemical reaction with TiO₂ nanoparticles (about 20-30 nm in diameter) gave rise to PbS-coated TiO₂ nanoparticles with a core/shell structure. The PbS thin film coating was quite uniform and the average coating depth of PbS on the TiO₂ nanoparticles was about 2-3 nm under the described conditions. It is interesting to note that the coating depth was found to be controlled to 2-10 nm range by increasing the amounts of reactants for Pb and S twice with a sonication time of 30 min.     

Selective Coloration of Melanin Nanospheres through Resonant Mie Scattering

Black melanin inks are prepared to selectively exhibit colors under strong light, inspired by human hair. High absorbance of melanin suppresses multiple scattering, causing resonant Mie scattering predominant. Various colors can be developed as the resonant wavelength dictated by nanosphere diameter. Therefore, the melanin inks can be used to encrypt and selectively disclose multicolor patterns for anticounterfeiting applications.     

Piezoresistive effects of copper-filled polydimethylsiloxane composites near critical pressure

Piezoresistive properties of polydimethylsiloxane (PDMS) filled with copper particles in volume fraction above the electrical percolation threshold (25.3–50.7 vol%) were investigated. Piezoresistive behavior of the PDMS-copper composites under compressive pressure showed not only a change in resistance by approximately six orders of magnitude (∼1.5 MPa), but also a change in the critical pressure due to variations in the hardness of the composites. Resistivity relaxation was observed near the critical pressure and was explained through a stress relaxation and percolation mechanism. The mean tunneling distance was calculated by using a theoretical equation for percolation under compression. When the gauge factors of the composites were plotted versus strain, a universal curve was obtained regardless of the copper contents. Finally, the PDMS-copper composite demonstrated good repeatability, showing only small differences in the relative resistance after five successive tests.     

Ruthenium Nanoparticles on Cobalt‐Doped 1T′ Phase MoS2 Nanosheets for Overall Water Splitting

2D MoS₂ nanostructures have recently attracted considerable attention because of their outstanding electrocatalytic properties. The synthesis of unique Co–Ru–MoS₂ hybrid nanosheets with excellent catalytic activity toward overall water splitting in alkaline solution is reported. 1T′ phase MoS₂ nanosheets are doped homogeneously with Co atoms and decorated with Ru nanoparticles. The catalytic performance of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is characterized by low overpotentials of 52 and 308 mV at 10 mA cm^?2 and Tafel slopes of 55 and 50 mV decade^?1 in 1.0 m KOH, respectively. Analysis of X‐ray photoelectron and absorption spectra of the catalysts show that the MoS₂ well retained its metallic 1T′ phase, which guarantees good electrical conductivity during the reaction. The Gibbs free energy calculation for the reaction pathway in alkaline electrolyte confirms that the Ru nanoparticles on the Co‐doped MoS₂ greatly enhance the HER activity. Water adsorption and dissociation take place favorably on the Ru, and the doped Co further catalyzes HER by making the reaction intermediates more favorable. The high OER performance is attributed to the catalytically active RuO₂ nanoparticles that are produced via oxidation of Ru nanoparticles.