Phase behavior in liquid crystallization for diblock copolymers consisting of rubbery amorphous and side-chain liquid crystalline components

Phase behavior in liquid crystallization was studied for a series of liquid crystalline (LC) diblock copolymers consisting of rubbery amorphous and side-chain liquid crystalline components, poly(n-butyl acrylate) (PBA) and poly[11-(4′-cyanophenyl-4″-phenoxy)undecyl acrylate] (PLC), respectively, using a time-resolved small-angle X-ray scattering (SAXS) techniques, DSC and polarized optical microscopy (POM). The block copolymers used had three kinds of copolymer compositions, 44, 20 and 15 wt% of PLC compositions (BLC44, BLC20 and BLC15, respectively). BLC44 showed a smectic liquid crystalline structure. In the process of liquid crystallization for BLC44, the SAXS peak due to the microphase separation structure existing before liquid crystallization was changed continuously to be at a smaller angular side, and at almost the same time, a new peak appeared at a further smaller angular side and developed. The former peak disappeared with the development of liquid crystallization. The behavior of these SAXS peaks suggests that the microphase separation structure was changed discretely at the transition from isotropic to smectic and that two phases coexist in the early stage of the liquid crystallization. The coexistence of two peaks in the early stage of the liquid crystallization corresponded to the POM observation. In the isotropization process, coexistence of two phases was not observed. For BLC20 exhibiting a cylindrical structure in both isotropic and liquid crystalline states, the liquid crystalline structure was not smectic but probably nematic, and the spacing was changed continuously in liquid crystallization. No liquid crystallization was observed in SAXS, POM and DSC for BLC15. The orientation of smectic layers within lamellar domains was investigated using 2D-SAXS images. The smectic layer was aligned perpendicularly to the lamellar interface.     

Psychological Stress Exacerbates Inflammation of the Ileum via the Corticotropin-Releasing Hormone-Mast Cell Axis in a Mouse Model of Eosinophilic Enteritis

The effects of psychological stress on eosinophilic gastrointestinal disorders have not been elucidated. This study investigated the effects of psychological stress in a mouse model of eosinophilic enteritis (EoN). BALB/c mice were treated with ovalbumin (OVA) to create an EoN model and subjected to either water avoidance stress (WAS) or sham stress (SS). Microscopic inflammation, eosinophil and mast cell counts, mRNA expression, and protein levels of type 2 helper T cell (Th2) cytokines in the ileum were compared between groups. We evaluated ex vivo intestinal permeability using an Ussing chamber. A corticotropin-releasing hormone type 1 receptor (CRH-R1) antagonist was administered before WAS, and its effects were analyzed. WAS significantly increased diarrhea occurrence and, eosinophil and mast cell counts, and decreased the villus/crypt ratio compared to those in the SS group. The mRNA expression of CRH, interleukin IL-4, IL-5, IL-13, eotaxin-1, and mast cell tryptase β2 significantly increased, and the protein levels of IL-5, IL-13, and OVA-specific immunoglobulin E (IgE) also significantly increased in the WAS group. Moreover, WAS significantly increased the intestinal permeability. The CRH-R1 antagonist significantly inhibited all changes induced by WAS. Psychological stress exacerbated ileal inflammation via the CRH-mast cell axis in an EoN mouse model.     

Fabrication of aluminium foams from powder by hot extrusion and foaming

In order to produce aluminium foams for light-weight and energy absorbing structures of automobiles, a method for fabricating aluminium foam from powder mixed with a foaming agent by using a mould is proposed. The method consists of four sequential processes: powder compacting, extruding, foaming and moulding. In the experiment for fabricating aluminium foam from powder, the conditions of powder extrusion and foaming by the heated die are determined from the density of the aluminium foams made without a mould. The experimental results show that the relative density of the aluminium foam made under appropriate conditions is 0.22. In moulding of aluminium foam, a stainless steel pipe is used as a mould and the cylindrical aluminium foam is produced by filling into the pipe mould. The distribution of relative density within the aluminium foam bar is in a range of 0.2–0.3 by rapid cooling of the pipe. To examine the ratio of deformation energy to weight of the pipe including the aluminium foam, a compression test using a press is carried out. The deformation energy of the pipe can be increased with aluminium foam filled by the proposed method.     

Effectiveness of polyamidoamine dendrimers modified with tripeptide growth factor, glycyl-L-histidyl-L-lysine, for enhancement of function of hepatoma cells

Cationic polyamidoamine dendrimers are known to be highly branched cascade polymers. Tripeptide growth factor, glycyl-L-histidyl-L-lysine (GHK), was employed as a ligand for activation or attachment of cells from a rat hepatoma cell line, H4-H-E-C3, and immobilized at the terminus of the dendrimer (GHK-dendrimer) to develop a suitable surface for use as a culture substratum in the bioartificial liver support system (BAL). The growth of cells was inhibited by increasing the number of generations of GHK-dendrimers. On the other hand, urea synthesis and lidocaine clearance of the cells adhered on fifth generation GHK-dendrimers were enhanced much more than on first generation GHK-dendrimers. GHK was shown to act as a growth inhibitor and an activator of hepatoma cells. These properties of GHK are advantageous for the utilization of hepatoma cells in BAL. Ligand-modified dendrimers are very promising for the creation of a high-performance substratum for cell culture and high performance bioartificial organs, as well as for high-performance bioartificial liver systems. GHK may have the potential to be a highly useful ligand.     

A 7 ns 1 Mb BiCMOS ECL SRAM with shift redundancy

A 7-Mb BiCMOS ECL (emitter coupled logic) SRAM was fabricated in a 0.8 μm BiCMOS process. An improved buffer with a high-level output of nearly V_CC is adopted to eliminate the DC current in the level converter circuit, and the PMOS transistor has a wide operating margin in the level converter. The configurable bit organization is realized by using a sense-amplifier switch circuit with no access degradation. A wired-OR demultiplexer for the ×1 output, having the same critical path as the ×4 output circuit, allows for the same access time between the two modes. The ×1 or ×4 mode is electrically selected by the external signal. A simplified programming redundancy technology, shift redundancy, is utilized. Address programming is performed by cutting only one fuse in the shift redundancy. The RAM operates at the ECL-10K level with an access time of 7 ns. and the power dissipation at 50 MHz is 600 mW for the × mode     

Features of Rotating Stall Cell in a Diagonal Flow Fan（in Case of Mid-loading Rotor）

The structure and behavior of rotating stall cell were experimentally clarified in a diagonal flow fan. The specific-speed of the fan was 1140 (r/min, m3/min, m), and the total pressure-rise coefficient at design flow-rate was 0.345. The static pressure on outer casing wall and the total pressure at rotor inlet and outlet were measured using a high response pressure transducer. The measured data were processed by the use of DPLA technique, and the structure and behavior of rotating stall cell were obtained. As a result, the stall cell extent for circumferential and spanwise direction and the pressure distributions inside stall cell were clarified. The details of stall cell propagation were also shown.     

Interaction between zinc dialkyldithiophosphate and amine

This paper reports work on complex formation from ZDP and various aliphatic amines, and their equilibrium states in oil, adsorptivities and antiwear properties are investigated. Complex formation from ZDP and amine was proven by isolation and identification of solid crystals, and various complexes were found from mono- and diamines. The complex from monoamine has lower adsorptivity than free ZDP, while the poorer adsorptivity of ZDP/monoamine complex makes its antiwear property worse.     

Chemical reaction kinetics dataset of Cs-I-B-Mo-O-H system for evaluation of fission product chemistry under LWR severe accident conditions

In order to improve LWR source term under severe accident conditions, the first version of a fission product chemistry database named ‘ECUME’ was developed. The ECUME is intended to include several datasets of major chemical reactions and their effective kinetic constants for representative severe accident sequences. It is expected that the ECUME can serve as a fundamental basis from which fission product chemical models can be elaborated for use in the severe accident analysis codes. The implemented chemical reactions in the first version were those for representative gas species in Cs-I-B-Mo-O-H system from 300 to 3000 K. The chemical reaction kinetic constants were evaluated from either literature data or calculated values using ab-initio calculations. The sample chemical reaction calculation using the presently constructed dataset showed meaningful kinetics effects at 1000 K. Comparison of the chemical equilibrium compositions by using the dataset with those by chemical equilibrium calculations has shown rather good consistency for the representative Cs-I-B-Mo-O-H species. From these results, it was concluded that the present dataset should be useful to evaluate fission product chemistry in Cs-I-B-Mo-O-H system under LWR severe accident conditions, where kinetics effects should be considered.     

Effect of oxygen potential on the sintering behavior of MgO-based heterogeneous fuels containing (Pu, Am)O2−x

The effect of oxygen potential on the sintering behavior of MgO-based heterogeneous fuels containing (Pu, Am)O_2−x was experimentally investigated. Sintering tests in various atmospheres, i.e. air, moisturized 4%H₂-Ar, and 4%H₂-Ar atmosphere, were carried out. The sintering behavior was found to be significantly affected by the oxygen potential in the sintering atmosphere. The sintered density decreased with decreasing oxygen potential. The (Pu, Am)O_2−x phase sintered in a reductive atmosphere had hypostoichiometry. The aggregates of the (Pu, Am)O_2−x phase sintered in the reductive atmosphere grew, in comparison with those in the oxidizing one. The sintering mechanism was discussed in terms of the difference in sintering behavior of (Pu, Am)O_2−x and MgO.     

Effect of operating factors on liquid–liquid mass transfer and dispersion pattern of sedimentary liquid in a mechanically stirred vessel

Liquid–liquid dispersion and mass transfer were investigated in mechanically stirred vessels without baffles by changing operation factors such as an impeller rotation speed, off-bottom clearance, volumetric liquid ratio, etc. The dispersion regime was categorized into five groups: the sedimentary liquid was kept at the vessel bottom (I), partially elevated without any collision (II), partially dispersed by colliding with the impeller bottom (III), both liquids were partially dispersed by collisions with impeller blades (III’), and the sedimentary liquid was completely dispersed (IV). The dispersion switched to I → II → III → IV with the increasing rotation speed and decreasing off-bottom clearance. The liquid–liquid mass transfer rate was significantly enhanced with the collision of the sedimentary liquid with the impeller bottom, and subsequently increased with the increasing rotation speed, volumetric liquid ratio, and vessel diameter and with the decreasing off-bottom clearance. A multiple regression analysis method was applied to determine the mass transfer rates of III and III’.