等离子体散射分析的改进型交替隐式时域方法

提出了一种改进的交替隐式时域有限差分(FDTD)方法,运用该方法分析了等离子体涂覆导体圆柱的散射特性,为等离子体隐身技术的运用提供了一定的理论指导.该方法在整个问题空间采用完整场形式的场量进行迭代计算,并运用中心差分格式离散极化电流密度辅助方程.仿真实验表明,提出的算法具有无条件稳定特性,其计算效率明显优于以往文献提出的交替隐式FDTD方法,在精度和效率上也稍高于普通的显式FDTD方法.     

Evaluation of Tensile Strength and Fracture Toughness of Yttria-Stabilized Zirconia Polycrystals with Fracture Surface Analysis

The tensile strength of yttria-stabilized tetragonal zirconia polycrystals (Y-TZPs) was measured and the fracture surfaces were analyzed with the scanning electron microscope and X-ray microanalyzer. The fracture origins of the pressureless-sintered samples were voids or inclusions such as A1₂O₃, A1₂O₃ with SiO₂, and cubic-ZrO₂, while the fracture origins of the hot isostatically pressed samples were inclusions; no voids were detected at fracture origins. The higher strengths of the hot isostatically pressed samples versus those of the pressureless-sintered samples were consistent with the change in fracture origins. The fracture toughness of the samples calculated from the tensile strength and analysis of the fracture origins was 3.4 to 3.7 MPa √m. These values are lower than those measured with the SEPB method. These discrepancies might be caused by the difference in the state of the fracture origin and its neighborhood, such as the size of the fracture origin and interaction between two surfaces in the precrack.     

Development of poly(vinyl alcohol) hydrogel for waste water cleaning. II. Treatment of N,N-dimethylformamide in waste water with poly(vinyl alcohol) gel with immobilized microorganisms

The activated sludge that had been sufficiently cultivated with DMF-containing waste water was entrapped and immobilized in spherical poly(vinyl alcohol) (PVA) hydrogel particles. Features of numbers and distribution of bacteria in the resultant PVA gel were estimated. The DMF-decomposing bacteria named Bacillus cereus D-1 was isolated. Several morphological and physiological responses of the bacteria were revealed. Spherical PVA gel with the DMF-decomposing bacteria prepared through of freezing and thawing was tested for treatment of DMF-containing effluent. Test results have shown the ability of stable operation and maintenance at the same capacity of 1 kg/m³/day by both a basic study and a bench plant test. © 1995 John Wiley & Sons, Inc.     

Polymerization of 2-dibutylamino-1,3,5-triazine-4,6-dithiol on wire during friction process

2-Dibutylamino-1,3,5-triazine-4,6-dithiol (DB) and a mixture of DB and triallylisocyanurate (TAIC) were used as a lubricant during steel wire drawing due to a dry process. DB gave a polymer film with 180 nm in thickness to wire surfaces during the wire drawing. The polymer film had a disulfide structure on the backbone and contained a small amount of DB monomer and olygomer. Molecular weight and polymer weight increased with the drawing rate. The mixture of DB and TAIC gave mainly a three-dimensional polymer film with 225 nm in thickness to wire surfaces during drawing. The polymer film insoluble in THF had mono and disulfide structures and contained a small amount of linear polymer, DB, and TAIC. Such tribological polymerizations are estimated as follows: DB produces dithiyl radicals on a nascent surface formed during drawing and in the presence of oxygen and heat. The dithiyl radicals were polymerized by coupling with each other to give disulfide bonds or added to allyl groups in TAIC to give monosulfide bonds. It is concluded that this technique should be possible to use for unifying metal processing and surface treatment. © 1995 John Wiley & Sons, Inc.     

Low Frictional Coating of Copper Oxide with Preferred Crystal Orientation

Coating films of copper oxide were synthesized on stainless steel substrates with a r.f. magnetron sputter. The composition of the films could be controlled by changing a gas ratio of oxygen and argon in sputter plasma, which was analyzed with X-ray diffraction spectroscopy. Frictional property of the films in an atmospheric pressure and in an ultra high vacuum (UHV) was measured with a pin-on-disk vacuum tribometer. Frictional coefficients of the film as low as 0.03 and 0.05 were achieved in an atmospheric pressure and in UHV, respectively. It is therefore, expected that the films are applicable to smooth-drive movable materials for ultimate conditions such as UHV and high temperature.     

The strength properties of iron aluminides

For the development of Fe−Al alloys as structural materials, a deep understanding of slip and deformation properties is necessary. In particular, since mechanical properties of the iron aluminides are affected by excess vacancy strengthening as well as the positive-temperature dependence of yield stress, controlling these strength features is essential. In this article, the strength properties of iron aluminides are reviewed. Author’s Note: All compositions are provided in mole percent. Kyosuke Yoshimi earned his Ph.D. in materials science and engineering at Tohoku University in 1997. He is currently a research associate at Tohoku University. Shuji Hanada earned his Ph.D. in materials science and engineering at Tohoku University. He is currently a professor at Tohoku University. Dr. Hanada is also a member of TMS.     

Removal of dissolved estrogen in sewage effluents by β-cyclodextrin polymer

Substances with estrogenic activity are found in effluents of municipal sewage plants and dairy farms. These effluents have the potential to induce feminization in male fish. In this study, cyclodextrin polymers (CDPs) that are insoluble in both polar and non-polar solvents were selected for the removal of dissolved estrogens in the effluent of a municipal sewage plant. The removal capacity of CDPs was high in the order of β-CDP ≥ γ-CDP ? α-CDP. The mechanism for adsorption of estrogens to β-CDP was not only due to a host-guest interaction as molecular recognition by β-cyclodextrin (β-CD), but also due to adsorption by the polymer matrix. β-CDP of 0.2% (w/v) removed 17β-estradiol (E2) of about 70% from 10⁻¹¹ mol/L, and more than 90% from ≥ 10⁻¹⁰ mol/L. The removal ratios of E2 in the presence of cholesterols, which are contained at higher concentrations than estrogens in sewage effluents and are adsorptive competitor for β-CDP, were about 85% at a cholesterol/E2 molar ratio of 100 and > 90% at molar ratios of 0.1, 1, and 10. The effluent from a municipal sewage plant had estrogenic activity corresponding to 5.5 × 10⁻¹¹ molE2/L by yeast two-hybrid assay. The estrogens in the effluent were also removed > 90% by the β-CDP treatment. Therefore, β-CDP is able to remove dissolved estrogens over a wide range of concentrations in the presence of various contaminants such as wastewaters.     

Seismic stability of embankments subjected to pre-deformation due to foundation consolidation

It has been reported that the major cause of earthquake damage to embankments on level ground surfaces is liquefaction of foundation soil. A few case histories, however, suggest that river levees resting on non-liquefiable foundation soil have been severely damaged if the foundation soil is highly compressible, such as thick soft clay and peat deposits. A large number of such river levees were severely damaged by the 2011 off the Pacific coast of Tohoku earthquake. A detailed inspection of the dissected damaged levees revealed that the base of the levees subsided in a bowl shape due to foundation consolidation. The liquefaction of a saturated zone, formed at the embankment base, is considered the prime cause of the damage. The deformation of the levees, due to the foundation consolidation which may have resulted in a reduction in stress and the degradation of soil density, is surmised to have contributed as an underlying mechanism. In this study, a series of centrifuge tests is conducted to experimentally verify the effects of the thickness of the saturated zone in embankments and of the foundation consolidation on the seismic damage to embankments. It is found that the thickness of the saturated zone in embankments and the drainage boundary conditions of the zone have a significant effect on the deformation of the embankments during shaking. For an embankment on a soft clay deposit, horizontal tensile strain as high as 6% was observed at the zone above the embankment base and horizontal stress was approximately half that of the embankment on stiff foundation soil. Crest settlement and the deformation of the embankment during shaking were larger for the embankment subjected to deformation due to foundation consolidation.     

Tribological Mechanisms of Steels with Respect to Diamond-Like Carbon in Terms of Energy Input

The wear behavior of a carbon steel (SUJ2, ASTM E52100 or similar) and a stainless steel (SUS440C, ASTM 440C or similar) with respect to diamond-like carbon (DLC) was evaluated based on the energy input. The conventional wear equation (Holm-Archard equation) was derived based on the friction force. The wear–energy equation was transformed from the Holm-Archard equation. The measurement method of the energy input induced by a tribometer is proposed, and the equation describing the relationship between the friction coefficient and energy input is introduced. The tribology functions derived from the energy equations are proposed. The wear behavior of the steel balls against the DLC is discussed in terms of tribology functions.     

Drying characteristics of porous material immersed in a bed of hygroscopic porous particles fluidized under reduced pressure

A relatively large wet material was immersed in a fluidized bed of hygroscopic porous particle (silica gel beads) under reduced pressure. And then the drying characteristics were compared with those in the case of inert particle (glass beads). The comparison of drying characteristics is performed experimentally and theoretically. In calculation, the water transfer from the sample to the fluidized bed was considered. The calculation results are in good agreement with the experimental data. The effects of the operational conditions (the pressure in the drying chamber and the temperature of the drying gas) on the drying characteristics were also examined in both fluidizing particles.The drying finishes earlier in the case of hygroscopic porous particle than in the case of inert particle regardless of pressure in the drying chamber, since the water transfer from the sample facilitates the drying in the case of hygroscopic porous particles. The temperature decrement in drying appears in the case of inert particle. This phenomenon is also observed in the case of hygroscopic porous particle, but the decrement degree of the temperature is much smaller than that in the case of inert particle. The difference of the minimum temperature in the sample in drying between the cases of hygroscopic porous particle and inert particle is very slight for different pressures in the drying chamber.