Design Errors: Inefficiency or Carelessness of Designer?

Design defects are experienced in many projects; the difference is only in the extent of occurrence. This technical note discusses a design error case in a building project in Nepal, where the designer made the wrong assumptions in roof treatment work for waterproofing as well as for heat insulation purposes. From the investigation of the problem, it was found that the waterproofing polymer was not applied directly over concrete slab top. Use of heavy concrete block as a heat insulation material also helped to increase the leakage problem. The problem evoked loss of prestige for project officials, the design consortium, and the contractor.     

Kinetic Study of the Steam Reforming of Isobutane Using a Pt–CeO2–Gd2O3 Catalyst

Steam reforming of isobutane on a 0.5% Pt–Ce_0.8Gd_0.2O_1.9 catalyst was carried out from 300 to 700 °C under integral conditions with a gas hourly space velocity (GHSV) of 12,000 h⁻¹. The major products were H₂, CO₂, CO and CH₄. The other products produced were ethane, ethylene, propane and propylene with a total molar composition of less than 1.5%. A complete conversion of isobutane was achieved at 700 °C, Kinetic data was obtained by changing the partial pressure of the reactants and the temperature under differential conditions with a GHSV of 55,400 h⁻¹. This was done after observing stable isobutane steam reforming for 160 h and under conditions where the mass transfer limitations were insignificant. An empirical Langmuir–Hinshelwood type model that best fit the kinetic data available was developed.     

An interactive lung field segmentation scheme with automated capability

Feasible clinical application of any automated segmenting methodology demands more than just accuracy. Amendment to the automated delineation is necessary when the algorithm fails, however, integrated solution to such a scenario is largely absent in literature. Hence in this survey we devised an architecture that does both the automated and interactive lung field localizations using a single segmenting engine—random walker algorithm—so that intuitive amendment is only necessary when the automated generated delineation is unsatisfactory. The algorithm proceeds by first extracting 18 intensity profiles running horizontally, each of them equally spacing apart, and in each intensity profile three extreme points denoting the two lungs and the esophagus are determined through profile matching. This done, the algorithm removes profiles that do not intersect with the lung, and the rest of the extreme points are plugged into random walker algorithm to perform segmentation. The achieved accuracy in localization by the above was 0.8875 in terms of overlap measure (the maximum value for this parameter is 1) over 341 images. In the case where unsatisfactory delineation prompts amendment necessary, the user can interactively segment the lung by just a shift on some of the previous-determined points to the desired locations, and random walker algorithm is run again with the amended input. By such a fusion, the benefits of both the automated and interactive segmentation are shared in a single architecture.     

Effect of temperature and α-irradiation on gas permeability for polymeric membrane

In the present study the polyethersulphone (PES) membranes of thickness (35 ±2) μm were prepared by solution cast method. The permeability of these membranes was calculated by varying the temperature and by irradiation of α ions. For the variation of temperature, the gas permeation cell was dipped in a constant temperature water bath in the temperature range from 303–373 K, which is well below the glass transition temperature (498 K). The permeability of H₂ and CO₂ increased with increasing temperature. The PES membrane was exposed by a-source (₉₅Am₂₄₁) of strength (1 μ Ci) in vacuum of the order of 10⁻⁶ torr, with fluence 2.7 × 10⁷ ions/cm². The permeability of H₂ and CO₂ has been observed for irradiated membrane with increasing etching time. The permeability increases with increasing etching time for both gases. There was a sudden change in permeability for both the gases when observed at 18 min etching. At this stage the tracks are visible with optical instrument, which confirms that the pores are generated. Most of pores seen in the micrograph are circular cross-section ones.     

Promoting Software Reuse Using Self Organizing Maps

Reusability of software, regardless of its utilizing technique, is widely believed to be a promising means for improving software productivity and reliability. However it is not practiced adequately due to the lack of techniques that facilitate the locating of reusable components that are functionally close. In this paper we apply Kohonen's Self-Organizing Maps to develop an approach for promoting Software Reuse. We look at the details of how Self-Organization can arrange and regularize data from the original pattern space into a topology preserving map. We describe a practical implementation of the SOM methodology for Software Reuse using a database of UNIX commands. And finally we briefly present our proposed Software Reuse Methodology.     

Multi-objective optimization of the ecm process

Optimization of process parameters is helpful in efficient working of the process and, hence, in lowering the cost of machining. Optimization of ECM process parameters has been achieved by considering only one objective at a time from metal removal rate, geometrical accuracy, and total process cost. From a practical point of view, a solution of the ecm problem satisfying all three objectives simultaneously is highly desirable.In the proposed model, a multi-objective problem involving the ecm process is formulated producing highly nonlinearized equations. These are then linearized by regression analysis and converted into a goal programming format. Finally, the problem is solved by the partitioning algorithm.It is concluded that the tool, or cathode, remains safe at the optimal values of design variables obtained in the examples discussed. The optimal value of voltage when metal removal rate is the only objective, is found to be higher than the case when the geometrical accuracy requirement is also to be satisfied.     

Limits of compensation in a failed antenna array

In large antenna arrays, the possibility of occurrence of faults in some of the radiating elements cannot be precluded at all times. In such situations, the radiation pattern of the array gets distorted, mostly with an increase in sidelobe level and decrease in gain. Although it is not possible to restore the pattern fully by rearranging the excitations of the functioning elements, compensation methods have been reported in the literature for restoring one performance parameter of the array and making a trade‐off on some other parameter. In this article, we have made a study on the tolerance level of this compensation process. One part of the study deals with the thinning in the failed array, that is, to find a limit on the minimum number of functioning elements of the array that can restore the digital beamforming of the failed array. The second part of study deals with finding the maximum number of element failures that can be compensated. The study was carried out by optimizing the amplitude excitations of the failed array. Instead of classical optimization techniques, particle swarm optimization was used for the compensation process. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:635–645, 2014.     

Interface Trap Charges Analysis on DC and High Frequency Characteristics of UTBB-FDSOI FET

Silicon - In this paper, we have studied effect of localised charges on performance of UTBB FDSOI FET. Purpose behind this work is to understand the performance of UTBB FDSOI FET under the...     

Studies on solvent extraction of La(III) using [A336][NO3–] and modeling by statistical analysis and neural network

Solvent extraction of La(III) from acidic nitrate medium has been studied with [A336][NO₃^–] in kerosene. The factors affecting the extraction of La(III) like equilibration time, nitrate ion, extractant and La(III) concentrations, aqueous acidity, O/A ratio variation, nature of diluent, and temperature have been investigated. McCabe-Thiele diagram has been plotted to find out the actual number of theoretical stages needed for complete extraction of lanthanum. The solvent has been successfully regenerated for further use after stripping of the metal. IR studies of [A336][NO₃^–] and La(III) loaded [A336][NO₃^–] have been carried out. Modeling of extraction data has been done using Multiple linear regression analysis and Artificial Neural Network, and the performances have been compared. Error in each case was evaluated in terms of R² and Root mean squared error (RMSE). Maximum extraction of La(III) was 82% when 0.6 M [A336][NO₃^–] was used for extraction. About 98% of the metal has been recovered using 0.2 M HNO₃ as stripping agent. Extractive separation of La(III) and Sm(III) was maximum (β = 65.2) using 0.1 M [A336][NO₃^–]. IR studies revealed formation of lanthanum complex in the extraction process. Artificial Neural Network proved to be better over Multiple linear regression in data prediction.