Drug release from heat-treated polyvinyl alcohol films

Polyvinyl alcohol (PVA) films containing 10% w/w of a model drug, sulphathiazole, were cast from aqueous solutions and subjected to heat treatment at specific temperatures for known periods of time. Heat treatment at temperatures above the T_g of the PVA films slowed down the rate of drug release from the films. Increasing the temperature of heat treatment from 120°C to 160°C further decreased the rate of drug release. On the other hand, if the heat treatment were conducted at a temperature below the T_g e.g. at 80°C, there were insignificant differences between the release profile of sulphathiazole from heat-treated films and that from untreated films. The duration of heat treatment affected the rate of drug release to a smaller extent compared to the temperature of heat treatment. These results correlated with the heat induced changes in the morphology of, and in the extent of water uptake by the PVA films.     

The phase behavior,mechanical, and rheological characteristics of blends containing nitrile polymers and poly(ethylene-co-maleic anhydride)

The phase behavior of binary blends of acrylonitrile/methyl acrylate/butadiene terpolymer (B210) and poly(ethylene-co-maleic anhydride) (PEMA) was examined based on thermal analysis and optical microscopy. Miscibility of these polymer blends was recognized over a wide range of compositions. The appearance of phase separation during subsequent heatings above the glass transition temperature (T_g) of these blends was associated with a lower critical solution temperature (LCST) behavior. Rheological characteristics such as shear storage modulus (G′), loss modulus (G″) and complex viscosity have been shown to depend on the amount of PEMA in the blend. Mechanical properties including the tensile strength and flexural modulus also were found to be related to the composition of the blend. © 1993 John Wiley & Sons, Inc.     

Commercial-Off-The-Shelf Selection Process

Abstract:

This article presents a Commercial-Off-The-Shelf (COTS) evaluation and selection process that utilizes a weighted scoring model to facilitate the comparison of COTS components relative to a number of pre-established evaluation criteria. The application of a COTS evaluation methodology will enable project teams responsible for designing complex systems to take advantage of potential economic leverage and performance advantages COTS technology presents. More importantly, this approach provides a mechanism for careful evaluation of the candidate COTS components to ensure engineers developing COTS-intensive systems give appropriate consideration to critical COTS attributes such as operational requirements, risk, cost, technology maturity, and supplier viability.     

Calcined Hydroxyapatite with Collagen I Foam Promotes Human MSC Osteogenic Differentiation

Collagen I-based foams were modified with calcined or noncalcined hydroxyapatite or calcium phosphates with various particle sizes and pores to monitor their effect on cell interactions. The resulting scaffolds thus differed in grain size, changing from nanoscale to microscopic, and possessed diverse morphological characteristics and resorbability. The materials’ biological action was shown on human bone marrow MSCs. Scaffold morphology was identified by SEM. Using viability test, qPCR, and immunohistochemical staining, we evaluated the biological activity of all of the materials. This study revealed that the most suitable scaffold composition for osteogenesis induction is collagen I foam with calcined hydroxyapatite with a pore size of 360 ± 130 µm and mean particle size of 0.130 µm. The expression of osteogenic markers RunX2 and ColI mRNA was promoted, and a strong synthesis of extracellular protein osteocalcin was observed. ColI/calcined HAP scaffold showed significant osteogenic potential, and can be easily manipulated and tailored to the defect size, which gives it great potential for bone tissue engineering applications.     

Impact of prefabrication technology on the cradle-to-site CO2 emissions of residential buildings

Clean Technologies and Environmental Policy - In recent years, the industrialization of construction has been promoted to achieve sustainable development within the construction industry;...     

Weight Science: Evaluating the Evidence for a Paradigm Shift

Considerable interest has been shown in the ability of caloric restriction (CR) to improve multiple parameters of health and to extend lifespan. CR is the reduction of caloric intake - typically by 20 - 40% of ad libitum consumption - while maintaining adequate nutrient intake. Several alternatives to CR exist. CR combined with exercise (CE) consists of both decreased caloric intake and increased caloric expenditure. Alternate-day fasting (ADF) consists of two interchanging days; one day, subjects may consume food ad libitum (sometimes equaling twice the normal intake); on the other day, food is reduced or withheld altogether. Dietary restriction (DR) - restriction of one or more components of intake (typically macronutrients) with minimal to no reduction in total caloric intake - is another alternative to CR. Many religions incorporate one or more forms of food restriction. The following religious fasting periods are featured in this review: 1) Islamic Ramadan; 2) the three principal fasting periods of Greek Orthodox Christianity (Nativity, Lent, and the Assumption); and 3) the Biblical-based Daniel Fast. This review provides a summary of the current state of knowledge related to CR and DR. A specific section is provided that illustrates related work pertaining to religious forms of food restriction. Where available, studies involving both humans and animals are presented. The review includes suggestions for future research pertaining to the topics of discussion.     

DNA Sequence Analysis of South African Helicobacter pylori Vacuolating Cytotoxin Gene (vacA)

Sequence diversity and population structures can vary widely among pathogenic bacteria species. In some species, all isolates are highly similar, whereas in others most of the isolates are distinguished easily. H. pylori is known for its wide genetic diversity amongst the various strains most especially in the genes involved in virulence. The aim of this study was to evaluate by PCR and sequence analysis, the genetic profile of H. pylori vacA gene (s1, s2, m1 and m2). We sequenced small DNA segments from 13 vacAs1, 10 vacAm2, 6 vacAm1 and 6 vacAs2 strains which were amplified with amplicon size of 259/286 bp, 290 bp and 352 bp for vacAs1/s2, m1 and m2 respectively. Based on similarities among our strains accession numbers were provided for seven vacAs1 (HQ709109-HQ709115), six vacAs2 (JN848463-JN848468), six vacAm1 (JN848469-JN848474) and six vacAm2 (HQ650801-HQ650806) strains. Amongst the strains studied, 98.07%, 98.58%, 97.38% and 95.41% of vacAs1, vacAs2, vacAm1 and vacAm2 of the strains were conserved respectively. Findings of this study underscores the importance of understanding the virulence composition and diversity of H. pylori in South Africa for enhanced clinico-epidemiological monitoring and pathophysiology of disease.     

Cogasification of blended coal‐biomass in an air/steam BFB gasifier: Experimental investigation and model validation

A series of cogasification experiments were performed at a 100 kW bubbling fluidized bed (BFB) gasifier to gasify the blended pellets made from two types of coals and woody biomass, with biomass‐to‐fuel mass ratios of 0–30%. In the cogasification, a mixture of air and steam was fed from the BFB gasifier bottom as gasification agent and the blended biomass‐coal pellets were fed into the bed layer. Impacts of biomass mass fraction in the binary pellets and gasification operation temperature on producer gas composition were experimentally investigated. The experimental results have been used to validate a mathematical model developed in this study. From both experimental observation and model prediction, it was found that adding biomass into coal has overall negative impact on producer gas quality in terms of combustible substance contents, and the extents of the blending effect were different among fuel types which have different properties. © 2015 American Institute of Chemical Engineers AIChE J, 61: 1639–1647, 2015     

Controlling the Er content of porous silicon using the doping current intensity

The results of an investigation on the Er doping of porous silicon are presented. Electrochemical impedance spectroscopy, optical reflectivity, and spatially resolved energy dispersive spectroscopy (EDS) coupled to scanning electron microscopy measurements were used to investigate on the transient during the first stages of constant current Er doping. Depending on the applied current intensity, the voltage transient displays two very different behaviors, signature of two different chemical processes. The measurements show that, for equal transferred charge and identical porous silicon (PSi) layers, the applied current intensity also influences the final Er content. An interpretative model is proposed in order to describe the two distinct chemical processes. The results can be useful for a better control over the doping process.

PACS

81.05.Rm; 82.45.Rr     

7-Ketocholesterol is Not Cytotoxic to U937 Cells When Incorporated into Acetylated Low Density Lipoprotein

The growth of the necrotic core region within advanced atherosclerotic plaque is thought to be driven by oxidised low density lipoprotein (oxLDL)-induced death of macrophage cells. OxLDL and atherosclerotic plaque are rich in oxysterols, especially 7-ketocholesterol (7KC). As 7KC triggers cell death at physiological concentrations when added directly to the cell culture media, 7KC and other oxysterols have been suggested to be the main cytotoxic agent of oxLDL. We investigated this hypothesis by examining the toxicity of 7KC to monocyte-like U937 cells when incorporated into high-uptake non-toxic acetylated LDL (acLDL). Incorporation of 7KC into acLDL greatly reduced the oxysterol toxicity when compared with an equivalent amount of 7KC added directly to U937 cells. Enrichment of oxLDL with 7KC did not significantly enhance lipoprotein toxicity. OxLDL was highly cytotoxic yet generated only low levels of intracellular 7KC. In comparison, 7KC-acLDL generated high intracellular 7KC concentrations with little loss in cell viability. The data show that when incorporated into lipoprotein, 7KC cytotoxicity is greatly reduced, even though intracellular levels exceed those measured when cells are incubated with oxLDL, which suggests 7KC is not the significant toxic agent within oxLDL.