Efficiency of repeated batch penicillin fermentation using two fermentors. Computer simulation and optimisation

Repeated batch operation using two fermentors (RBTF) to penicillin fermentation was demonstrated by computer simulation to improve productivity. Three operation modes were compared: chemostat, repeated batch operation using a single fermentor (RBSF) and RBTF; in each case account was made of the lag period before growth. The simulated fermentor performances were assessed on the basis of the penicillin productivity and concentration; the simulation was based on published batch fermentation data. It was shown that RBTF was superior to RBSF and chemostat. The advantage of RBTF increased as the lag period became greater.     

Bone Tissue Engineering in Rat Calvarial Defects Using Induced Bone-like Tissue by rhBMPs from Immature Muscular Tissues In Vitro

This study aimed to induce bone-like tissue from immature muscular tissue (IMT) in vitro using commercially available recombinant human bone morphogenetic protein (rhBMP)-2, rhBMP-4, and rhBMP-7, and then implanting this tissue into a calvarial defect in rats to assess healing. IMTs were extracted from 20-day-old Sprague-Dawley (SD) fetal rats, placed on expanded polytetrafluoroethylene (ePTFE) with 10 ng/μL each of rhBMP-2, BMP-4, and BMP-7, and cultured for two weeks. The specimens were implanted into calvarial defects in 3-week-old SD rats for up to three weeks. Relatively strong radiopacity was observed on micro-CT two weeks after culture, and bone-like tissue, comprising osteoblastic cells and osteoids, was partially observed by H&E staining. Calcium, phosphorus, and oxygen were detected in the extracellular matrix using an electron probe micro analyzer, and X-ray diffraction patterns and Fourier transform infrared spectroscopy spectra of the specimen were found to have typical apatite crystal peaks and spectra, respectively. Furthermore, partial strong radiopacity and ossification were confirmed one week after implantation, and a dominant novel bone was observed after two weeks in the defect site. Thus, rhBMP-2, BMP-4, and BMP-7 differentiated IMT into bone-like tissue in vitro, and this induced bone-like tissue has ossification potential and promotes the healing of calvarial defects. Our results suggest that IMT is an effective tissue source for bone tissue engineering.     

Influence of interstripe gain on crosscoupled-mode operation intwin-stripe lasers

Cross-coupled-mode operation in a twin-stripe laser is analyzed with particular concern for interstripe gain. When the interstripe gain of a twin-stripe laser is high, cross-coupled-mode operation is obtained with a cavity longer than the coupling length of the twin-stripe waveguide. The far-field pattern is single peaked and deflected to the low carrier density side. These characteristics are in contrast to those of the previous model without interstripe gain     

A CMOS multichannel 10-Gb/s transceiver

We describe a CMOS multichannel transceiver that transmits and receives 10 Gb/s per channel over balanced copper media. The transceiver consists of two identical 10-Gb/s modules. Each module operates off a single 1.2-V supply and has a single 5-GHz phase-locked loop to supply a reference clock to two transmitter (Tx) channels and two receiver (Rx) channels. To track the input-signal phase, the Rx channel has a clock recovery unit (CRU), which uses a phase-interpolator-based timing generator and digital loop filter. The CRU can adjust the recovered clock phase with a resolution of 1.56 ps. Two sets of two-channel transceiver units were fabricated in 0.11-/spl mu/m CMOS on a single test chip. The transceiver unit size was 1.6 mm /spl times/ 2.6 mm. The Rx sensitivity was 120-mVp-p differential with a 70-ps phase margin for a common-mode voltage ranging from 0.6 to 1.0 V. The evaluated jitter tolerance curve met the OC-192 specification.     

Development of a Millimeter-Wave Electron-Spin-Resonance Measurement System for Ultralow Temperatures and Its Application to Measurements of Copper Pyrazine Dinitrate

We have developed a millimeter-wave electron-spin-resonance (ESR) measurement system using a ³He-⁴He dilution refrigerator for the ultralow-temperature range below 1 K. The currently available frequency range is 125–130 GHz. This system is based on a Fabry-Pérot-type resonator (FPR) that is composed of two mirrors. The frequency can be changed by adjusting the distance between the mirrors using a piezoelectric actuator installed at the bottom of the resonator. A homodyne detection system with an InSb detector is built into the low-temperature section of the ³He-⁴He dilution refrigerator; this system provides high sensitivity. Using this system, we performed ESR measurements on a Heisenberg quantum-spin chain—copper pyrazine dinitrate, Cu(C₄H₄N₂)(NO₃)₂—over the temperature range from 6.6 down to 0.25 K. The ESR lines change continuously with decreasing temperature. Our results suggest that the ESR spectrum of copper pyrazine dinitrate may be useful as a temperature sensor for the very low-temperature range.     

Improvement of Electrical Contact Between TE Material and Ni Electrode Interfaces by Application of a Buffer Layer

A single ??-structure thermoelectric (TE) module based on p-type NaCo₂O₄, n-type Mg₂Si, and Ni electrode was fabricated by the spark plasma sintering (SPS) method. The NaCo₂O₄ powder was synthesized by using a metal?Ccitric acid complex decomposition method. Bulk Mg₂Si prepared by melt quenching was ground into a powder and sieved to particle size of 75???m or less. To obtain a sintered body of NaCo₂O₄ or Mg₂Si, the powder was sintered using SPS. Pressed Ni powder or mixed powder consisting of Ni and SrRuO₃ powder was inserted between these materials and the Ni electrode in order to connect them, and electrical power was passed through the electrodes from the SPS equipment. The open-circuit voltage (V _OC) values of a single module in which TE materials were connected to the Ni electrodes by using pressed Ni powder was 82.7?mV, and the maximum output current (I _max) and maximum output power (P _max) were 212.4?mA and 6.65?mW at ??T?=?470?K, respectively. On the other hand, V _OC of a single module in which TE materials and an Ni electrode were connected with a mixed powder (Ni:SrRuO₃?=?6:4 volume fraction) was 109?mV, and I _max and P _max were 4034?mA and 109?mW at ??T?=?500?K, respectively. These results indicate that the resistance at the interface between the TE materials and the Ni electrode can be decreased and the output power can be increased by application of a buffer layer consisting of Ni and SrRuO₃.     

THz-wave absorption by field-induced carriers in pentacene thin-film transistors for THz imaging sensors

Innovative sensing systems based on THz electromagnetic waves have been attracting a great deal of attention. Although many THz detectors have been developed over the years, it is currently difficult to manufacture low-cost THz sensing/imaging devices. In the present study, we propose to use organic field-effect transistors (OFETs) and small potential fluctuation against the carriers within them (N. Ohashi, H. Tomii, R. Matsubara, M. Sakai, K. Kudo, M. Nakamura, Appl. Phys. Lett. 91 (2007) 162105). We use THz time-domain spectroscopy for OFETs in which the carrier density in the pentacene active layer is modulated by the gate bias. We found evidence that the accumulated free holes in pentacene films can be excited by THz photons to overcome the surrounding barriers in the fluctuating potential. The Drude–Lorentz model could not account for the shape of the absorption spectra, which suggests that the holes are weakly restricted by the potential fluctuation. The integrated absorption intensity was proportional to the transfer characteristics of the OFETs. The present findings represent an important step toward developing a new class of THz-wave sensors.     

Dramatic Enhancement of Photoluminescence Quantum Yields for Surface‐Engineered Si Nanocrystals within the Solar Spectrum

Substantial improvements of the absolute photoluminescence quantum yield (QY) for surfactant‐free silicon nanocrystals (Si‐ncs) by atmospheric pressure microplasma 3‐dimensional surface engineering are reported. The effect of surface characteristics on carrier multiplication mechanisms is explored using transient induced absorption and photoluminescence QY. Surface engineering of Si‐ncs is demonstrated to lead to more than 120 times increase in the absolute QY (from 0.1% up to 12%) within an important spectral range of the solar emission (2.3–3 eV). The Si‐ncs QY is shown to be stable when Si‐ncs are stored in ethanol at ambient conditions for three months.     

Fabrication of CaCO3-Coated Vesicles by Biomineralization and Their Application as Carriers of Drug Delivery Systems

We fabricated CaCO₃-coated vesicles as drug carriers that release their cargo under a weakly acidic condition. We designed and synthesized a peptide lipid containing the Val-His-Val-Glu-Val-Ser sequence as the hydrophilic part, and with two palmitoyl groups at the N-terminal as the anchor groups of the lipid bilayer membrane. Vesicles embedded with the peptide lipids were prepared. The CaCO₃ coating of the vesicle surface was performed by the mineralization induced by the embedded peptide lipid. The peptide lipid produced the mineral source, CO₃²⁻, for CaCO₃ mineralization through the hydrolysis of urea. We investigated the structure of the obtained CaCO₃-coated vesicles using transmission electron microscopy (TEM). The vesicles retained the spherical shapes, even in vacuo. Furthermore, the vesicles had inner spaces that acted as the drug cargo, as observed by the TEM tomographic analysis. The thickness of the CaCO₃ shell was estimated as ca. 20 nm. CaCO₃-coated vesicles containing hydrophobic or hydrophilic drugs were prepared, and the drug release properties were examined under various pH conditions. The mineralized CaCO₃ shell of the vesicle surface was dissolved under a weakly acidic condition, pH 6.0, such as in the neighborhood of cancer tissues. The degradation of the CaCO₃ shell induced an effective release of the drugs. Such behavior suggests potential of the CaCO₃-coated vesicles as carriers for cancer therapies.