Method of obtaining wavefront slope data from through-focus point spread function measurements

A method is described for analyzing point source imagery collected with various amounts of defocus to obtain wavefront slope data at the exit pupil of an imaging system. Integration of this slope data yields the system wavefront aberration function. The method is based on a geometric optics interpretation of intensity point spread function measurements in the caustic region near focus. Algorithm performance is examined through Monte Carlo simulations. Application of the method to segmented-aperture systems is also explored. The proposed method is used to generate initial wavefront estimates for an iterative phase retrieval algorithm, significantly improving the capture range over a blind phase retrieval approach when segment tilt errors are large.     

Finding minimal herbicide concentrations in ground water? Try looking for their degradates

Extensive research has been conducted regarding the occurrence of herbicides in the hydrologic system, their fate, and their effects on human health and the environment. Few studies, however, have considered herbicide transformation products (degradates). In this study of Iowa ground water, herbicide degradates were frequently detected. In fact, herbicide degradates were eight of the 10 most frequently detected compounds. Furthermore, a majority of a herbicide's measured concentration was in the form of its degradates--ranging from 55 to over 99%. The herbicide detection frequencies and concentrations varied significantly among the major aquifer types sampled. These differences, however, were much more pronounced when herbicide degradates were included. Aquifer types presumed to have the most rapid recharge rates (alluvial and bedrock/karst region aquifers) were those most likely to contain detectable concentrations of herbicide compounds. Two indirect estimates of ground-water age (depth of well completion and dissolved-oxygen concentration) were used to separate the sampled wells into general vulnerability classes (low, intermediate, and high). The results show that the herbicide detection frequencies and concentrations varied significantly among the vulnerability classes regardless of whether or not herbicide degradates were considered. Nevertheless, when herbicide degradates were included, the frequency of herbicide compound detection within the highest vulnerability class approached 90%, and the median total herbicide residue concentration increased over an order of magnitude, relative to the parent compounds alone, to 2 microg/l. The results from this study demonstrate that obtaining data on herbicide degradates is critical for understanding the fate of herbicides in the hydrologic system. Furthermore, the prevalence of herbicide degradates documented in this study suggests that to accurately determine the overall effect on human health and the environment of a specific herbicide its degradates should also be considered.     

Projection of hazardous air pollutant emissions to future years

Projecting a hazardous air pollutant (HAP) emission inventory to future years can provide valuable information for air quality management activities such as prediction of program successes and helping to assess future priorities. We have projected the 1999 National Emission Inventory for HAPs to numerous future years up to 2020 using the following tools and data: the Emissions Modeling System for Hazardous Air Pollutants (EMS-HAP), the National Mobile Inventory Model (NMIM), emission reduction information resulting from national standards and economic growth data. This paper discusses these projection tools, the underlying data, limitations and the results. The results presented include total HAP emissions (sum of pollutants) and toxicity-weighted HAP emissions for cancer and respiratory noncancer effects. Weighting emissions by toxicity does not consider fate, transport, or location and behavior of receptor populations and can only be used to estimate relative risks of direct emissions. We show these projections, along with historical emission trends. The data show that stationary source programs under Section 112 of the Clean Air Act Amendments of 1990 and mobile source programs which reduce hydrocarbon and particulate matter emissions, as well as toxic emission performance standards for reformulated gasoline, have contributed to and are expected to continue to contribute to large declines in air toxics emissions, in spite of economic and population growth. We have also analyzed the particular HAPs that dominate the source sectors to better understand the historical and future year trends and the differences across sectors.     

Occurence of cyanazine compounds in groundwater: degradates more prevalent than the parent compound

A recently developed analytical method using liquid chromatography/mass spectrometry was used to investigate the occurrence of cyanazine and its degradates cyanazine acid (CAC), cyanazine amide (CAM), deethylcyanazine (DEC), and deethylcyanazine acid (DCAC) in groundwater. This research represents some of the earliest data on the occurrence of cyanazine degradates in groundwater. Although cyanazine was infrequently detected in the 64 wells across Iowa sampled in 1999, cyanazine degradates were commonly found during this study. The most frequently detected cyanazine compound was DCAC (32.8%) followed by CAC (29.7%), CAM (17.2%), DEC (3.1%), and cyanazine (3.1%). The frequency of detection for cyanazine or one or more of its degradates (CYTOT) was more than 12-fold over that of cyanazine alone (39.1% for CYTOT versus 3.1% for cyanazine). Of the total measured concentration of cyanazine, only 0.2% was derived from its parent compound-with DCAC (74.1%) and CAC (18.4%) comprising 92.5% of this total. Thus, although DCAC and CAC had similar frequencies of detection, DCAC was generally present in higher concentrations. No concentrations of cyanazine compounds for this study exceeded water-quality criteria for the protection of human health. Only cyanazine, however, has such a criteria established. Nevertheless, because these cyanazine degradates are still chlorinated, they may have similar toxicity as their parent compound-similarto what has been found with the chlorinated degradates of atrazine. Thus, the results of this study documented that data on the degradates for cyanazine are critical for understanding its fate and transport in the hydrologic system. Furthermore, the prevalence of the chlorinated degradates of cyanazine found in groundwater suggests that to accurately determine the overall effect on human health and the environment from cyanazine its degradates should also be considered. In addition, because CYTOT was found in 57.6% of the samples collected from alluvial aquifers, about 2-5 times more frequently than the other major aquifertypes (glacial drift, bedrock/karst, bedrock/nonkarst) under investigation, this finding has long-term implications for the occurrence of CYTOT in streams. It is anticipated that low-level concentrations of CYTOT will continue to be detected in streams for years after the use of cyanazine has terminated (scheduled for the year 2000 in the United States), primarily through its movement from groundwater into streams during base-flow conditions.     

Symbiosis of nurse and machine through fuzzy logic: improved specificity of a neonatal pulse oximeter alarm

This article describes the theoretical underpinnings that preceded the design of a new neonatal pulse oximeter alarm that differentiates true from false alarms based on an artificial intelligence theory called "fuzzy logic." The connection between the intuition and sense of advocacy gained through neonatal primary nursing and the application of fuzzy logic to solve the problem of false alarms--that is, the symbiosis between nurse and machine--are explained. Emphasis is placed throughout on the importance of involving nurses in the development of the technology for which they are responsible.     

Alliance for destiny: education and practice

As the whole context of nursing continues to change radically in the face of unmet societal needs, nothing short of total revolution will suffice. Nurses must take control of nursing practice and be critical of the nation's inadequate "sick-care" system in order to effect sweeping changes in the scope, availability and efficacy of healthcare in the U.S. To do this requires an acknowledgment that true nursing education cannot exist without nursing practice. The transformation of curriculum must center on caring, which characterizes what nurses really do in a medically dominated system focused exclusively on curing.     

Persistence of decreased T-helper cell function in industrial workers 20 years after exposure to 2,3,7,8-tetrachlorodibenzo-p-dioxin

OBJECTIVE: To evaluate the distribution of mepivacaine hydrochloride after distal interphalangeal (DIP) joint injection in horses. DESIGN: Prospective, uncontrolled study. ANIMALS: 10 adult horses. PROCEDURE: 30 minutes before euthanasia, 8 ml of 2% mepivacaine hydrochloride was injected into the dorsal pouch of a forelimb DIP joint. Synovial tissue from the DIP joint and podotrochlear (navicular) bursa and bone tissue from the medullary cavity of the distal sesamoid (navicular) bone were taken from both forelimbs immediately after death. All synovial and bone specimens were analyzed for tissue concentration of mepivacaine by high-performance liquid chromatography. Synovial tissue and bone specimen concentrations from the injected forelimb were compared with corresponding specimens from the noninjected forelimb. All synovial tissue and bone specimen concentrations were compared with an estimated effective tissue concentration of mepivacaine (0.3 microgram/mg) for local anesthesia. RESULTS: Specimen concentrations of mepivacaine from the injected forelimb were significantly greater (P < 0.05) than those in the corresponding tissues of the contralateral noninjected forelimb. All DIP joint and navicular bursa synovial tissue specimens from the injected forelimb had greater than the estimated effective tissue concentration of mepivacaine for local anesthesia. Of the 10 navicular bone specimens from the injected forelimb, 4 were higher and 2 were within 20% of the estimated effective tissue concentration of mepivacaine for local anesthesia. CONCLUSIONS: Mepivacaine hydrochloride deposited into the DIP joint should anesthetize pain arising from navicular bursa synovia and may decrease pain arising from the medullary cavity of the navicular bone. CLINICAL RELEVANCE: DIP joint injection of mepivacaine hydrochloride is not specific for DIP joint pain.     

The Drug Evaluation Classification Program: using ocular and other signs to detect drug intoxication

BACKGROUND: A systematic approach to determining drug intoxication has been developed for use by police officers. By considering specific physiological signs, trained officers can detect the effects of seven major drug types. METHODS: Officers follow a 12-step testing sequence and evaluate signs such as pupil sizes and responses, eye movements, heart rate, body temperature, mental timing, and balance. A matrix is then used to compare that subject's signs to those that would be produced by the seven types of drugs. If a pattern match is found, the officer concludes that the subject is under the influence of a drug and specifies the drug type. RESULTS: Several field and laboratory validation studies have been conducted using these procedures. In general, officers were 70% to 90% accurate in determining intoxication status and drug classification, but poly-drug use and drug rebound effects can sometimes cause problems in interpretation. CONCLUSION: Ocular and other physiological signs can be used to detect drug intoxication and classify the type of drug taken. Knowledge of the procedures used in the Drug Recognition Program can enable optometrists to serve as consultants to the police and as expert witnesses in cases involving the use of ocular signs that indicate illicit drug use.     

Trickle impregnation of small motors

Trickle impregnation is a method of coating the windings of armature and stator components with a solventless polyester or epoxy resin. The process involves preheating the windings, dispensing a measured amount of resin, and heat-curing the resin. The advantages of trickle impregnation are presented and the materials used (polyesters and epoxies) are detailed. Three machine configurations that have been designed to perform the trickle impregnating operations of heating cores and dispensing resin and described: dial type, flow-through ovens, single-station machines, and batch-process machines. Special considerations relating to resin dispensing are also discussed