Application of in vitro methods for selection of Lactobacillus casei strains as potential probiotics

Probiotics have established their efficacy as dietary adjuncts providing benefits to consumers, but the selection of probiotics before incorporation in diet requires close scrutiny in the form of in vitro as well as in vivo tests. The present study was undertaken to check different in vitro characteristics of seven Lactobacillus casei strains. The characteristics studied include acid and bile tolerance, adhesion and cell surface hydrophobicity, antimicrobial effect on common pathogens and cholesterol reduction. All strains were able to resist pH 3 for 3 h, though resistance to pH 2 was exhibited by NCDC 17, C1 and Y strains only. NCDC 63 and VT strains were able to tolerate 1% and 2% bile concentrations for 12 h. There was wide variation in ability of strains to adhere to isolated rat epithelial cells. The index was highest for C1 at 66%. The electron microscopic adhesion studies on the stainless steel chips did not reveal any specific attachment to surfaces by any of strains. The hydrophobic character for octane was highest for strain C1 at 54.06% and lowest for strain C2 at 4.65%. The ability to antagonize common pathogens was observed in all strains but this activity was attributed to production of organic acids and no specific compound caused the inhibitory effect. The cholesterol reducing ability varied not only for strains but also for time of incubation. NCDC 17 showed maximum reduction in cholesterol level after 48 h of incubation with buffalo plasma as the source of cholesterol. Overall there existed variations in different strains with respect to different characters of significance to be a probiotic.     

Annealing temperature-dependent structural and electrical properties of (Ta2O5)1-x - (TiO2)x thin films,x ≤ 0.11

(Ta₂O₅)_1-x- (TiO₂)_x (TTO_x) thin films, with x = 0, 0.03, 0.06, 0.08, and 0.11, were deposited using magnetron direct current (DC) sputtering method onto the P/boron-silicon (1 0 0) substrates by varying areas of Tantalum and Titanium metallic targets, in oxygen environment at ambient temperature. The as-deposited thin films were annealed at temperatures ranging from 500 to 800 °C. Generally, the formation of the Ta₂O₅ structure was observed from the X-ray diffraction measurements of the annealed films. The capacitance of prepared metal– oxide– semiconductor (MOS) structures of Ag/TTO_x/p-Si was measured at 1 MHz. The dielectric constant of the deposited films was observed altering with varying composition and annealing temperature, showing the highest value 71, at 1 MHz, for the TTO_x films, x = 0.06, annealed at 700 °C. With increasing annealing temperature, from 700 to 800 °C, the leakage current density was observed, generally decreasing, from 10^?5 to 10^?8 A cm^?2, for the prepared compositions. Among the prepared compositions, films with x = 0.06, annealed at 800 °C, having the observed value of dielectric constant 48, at 1 MHz; and the leakage current density 2.7 × 10^?8 A cm^?2, at the electric field of 3.5 × 10⁵ V cm^?1, show preferred potential as a dielectric for high-density silicon memory devices.     

Convective heat losses in flat-plate collectors

A simple correlation approach has been adopted to allow calculation of the convective heat transfer coefficients in flat-plate collectors over the whole range of latitudes. Data on the overall top loss coefficient is in good agreement with a recently proposed empirical approach.     

Microbial Inactivation Kinetics in Soymilk during Continuous Flow High-Pressure Throttling

ABSTRACT:  The thermal resistance of  Clostridium sporogenes  PA 3679 ATCC 7955 was determined in soymilk (pH 7) and 0.1% peptone water (pH 7) by the capillary tube method. In the continuous flow high-pressure throttling, the temperature of soymilk increased due to instantaneous pressure release and the additional heat was supplied by a heat exchanger to achieve the set temperature. The soymilk was immediately cooled after a short preset hold time to below 40 °C. A significant increase in the heat resistance was observed in  C. sporogenes  spores when heated in soymilk in comparison to 0.1% peptone water. The  D ₁₂₁-value for spores in soymilk was approximately 3-folds higher than peptone water. The  z- value was also much higher in soymilk as compared to that in 0.1% peptone water. Continuous flow high-pressure throttling (HPT) from 207 or 276 MPa to atmospheric pressure reduced the microbial populations in inoculated soymilk up to 6 log cycles when the holding times were 10.4, 15.6, and 20.8 s and the process temperatures were 85, 121, 133, and 145 °C, respectively. The sporicidal effect increased as the operating pressure, time, and temperature were increased. More injured spores were found at 207 MPa than at 276 MPa, indicating that lower pressure caused cell injury whereas high pressure caused cell death.     

Markovian Queues with Three Heterogeneous Servers1

In this article a Markovian queueing system with three heterogeneous servers is considered. The system is such that the first server works faster than the second, and the second works faster than the third. This heterogeneous system is compared to the corresponding homogeneous system, and conditions showing its efficiency are obtained. The problem of obtaining the best service rates, which minimize the average characteristics of the heterogeneous system, is investigated numerically. Tables representing the sequences of the best service rates, and the average characteristics of both the heterogeneous and the homogeneous systems are given.     

Reducing overhead in movement based dynamic location management scheme for cellular networks

One of the key issues in cellular mobile communication is to find the current location of mobile terminal (MT) to deliver the services, which is called location management (LM). Much research has been done on dynamic LM that reduced the LM cost up to a large extent. In movement based dynamic LM scheme, the location area is defined in the form of ring of cells for individual user. Whenever an MT visits a cell outside of its current location area (LA), it triggers location update (LU). For this purpose, network must inform the mobile terminal about ID of all the cells present in its current location area. In this paper, a simple way of cell-ID assignment is proposed under which, network sends only the ID of center cell of LA ring to MT and then MT can compute IDs of all other cells in its location area. This saves a significant amount of wireless bandwidth by minimizing the signaling traffic at VLR level and thus reduces the mobility management overhead.     

Dielectric properties of Na<Subscript>1-<Emphasis Type="Italic">x</Emphasis></Subscript>K<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>NbO<Subscript>3</Subscript> in orthorhombic phase

Pellets of ceramic Na_1−xK_xNbO₃ (x = 0, 0.2 and 0.5), were prepared by conventional solid-state reaction method. Prepared samples were characterized using XRD and SEM. The frequency and temperature variation of dielectric constant, loss tangent and dielectric conductivity of prepared samples were measured in the frequency range from 10 KHz-1 MHz, and in the temperature range from 50–250°C for x = 0.2 and 0.5, and between 50 and 480°C for x = 0 compositions. It was observed that the dielectric constant and loss tangent decrease, and conductivity increases with increasing frequency. Near the transition temperature the material shows anomalous behaviour for the observed properties, and the peaks of dielectric constant and loss tangent were observed shifting towards lower temperature with increasing frequency.     

Light emitting devices from organic charge transfer adduct thin films

For the first time, thin film devices of charge transfer adducts of tetrathiafulvalene (TTF) have been fabricated. A luminance of 5 cd m⁻² has been achieved for a device structure ITO/poly(aniline)/TTF(NO₃)_0.55/Al whose EL spectrum has a broad peak at 645 nm. The devices were fabricated by spin coating from solutions of the adducts. A luminous efficiency of 5×10⁻⁴ lm W⁻¹ has been obtained for these devices which is comparable to that of ITO/poly(aniline)/Alq₃/Al (5.2×10⁻⁴ lm W⁻¹) under same fabrication conditions. The single layer, mixed layer and double layer devices fabricated in this study fit the space charge limited model. Devices fabricated from the adduct [TTF–Alq₃] emit white light (40 cd m⁻²) with a luminous efficiency of 6.6×10⁻⁴ lm W⁻¹. The colour of light emitted appears to depend on the effective oxidation state of TTF in the adducts.     

Theoretical Evaluation of Crosslink Density of Chain Extended Polyurethane Networks Based on Hydroxyl Terminated Polybutadiene and Butanediol and Comparison with Experimental Data

Polyurethane networks between hydroxyl terminated polybutadiene (HTPB) and butanediol (BD) were prepared using toluene diisocyanate (TDI) as the curative. HTPB and BD were taken at equivalent ratios viz.: 1:0, 1:1, 1:2, 1:4, and 1:8. Crosslink density (CLD) was theoretically calculated using α-model equations developed by Marsh. CLD for the polyurethane networks was experimentally evaluated from equilibrium swell and stress–strain data. Young’s modulus and Mooney–Rivlin approaches were adopted to calculate CLD from stress–strain data. Experimentally obtained CLD values were enormously higher than theoretical values especially at higher BD/HTPB equivalent ratios. The difference in the theoretical and experimental values for CLD was explained in terms of local crystallization due to the formation of hard segments and hydrogen bonded interactions.