Quantitation of Cefaclor in Pharmaceutical Dosage Forms Using High Performance Liquid Chromatography

A stability-indicating high-performance liquid chromatography for the quantitation of cefaclor in pharmaceutical dosage forms has been developed. The method is accurate and precise with a percent relative standard deviation of 1.2 based on 5 readings. A number of inactive ingredients present in the capsules and suspensions did not interfere with the assay procedure. The extraction procedure from the dosage forms is very simple. The recovery from the synthetic mixtures was quantitative. The capsules which had expired 3 years ago lost only 3% of the potency. The drug appears to be very sensitive to strong acids or bases since a 5 minute boiling caused 100% degradation of drug in both the solutions.     

A 4.5-GHz 130-nm 32-KB L0 cache with a leakage-tolerant self reverse-bias bitline scheme

This paper describes a 32-KB two-read, one-write ported L0 cache for 4.5-GHz operation in 1.2-V 130-nm dual-V/sub TH/ CMOS technology. The local bitline uses a leakage-tolerant self reverse-bias (SRB) scheme with nMOS source-follower pullup access transistors, while preserving robust full-swing operation. Gate-source underdrive of -220 mV on the bitline read-select transistors is established without external bias voltages or gate-oxide overstress. Device-level measurements in the 130-nm technology show 72/spl times/ bitline active leakage reduction, enabling low-V/sub TH/ usage, 40% bitline keeper downsizing, and 16 bitcells/bitline. 11% faster read delay and 2/spl times/ higher dc noise robustness are achieved compared with high-performance dual-V/sub TH/ bitline scheme. Sustained performance and robustness benefits of the SRB technique against conventional dynamic bitline with scaling to 100- and 70-nm technology is also presented.     

A theoretical framework for gain scheduling

The weighted incremental norm approach was originally introduced as a natural framework for extending well‐known H_∞ linear control concepts into the nonlinear context. In this paper, we investigate the numerous links between this new approach and the classical gain‐scheduling technique. Although based on heuristic rules, gain‐scheduled control is probably the most widespread nonlinear technique. In this paper, we point out that the control objectives of the gain‐scheduled controller design can be expressed as the weighted incremental norm minimization of a nonlinear operator. The result interest is twofold: it first provides a rigorous mathematical formulation of the gain‐scheduling problem. Furthermore, existing gain‐scheduling techniques can be interpreted as approximate solutions to the weighted incremental norm minimization of a nonlinear operator. Copyright © 2003 John Wiley & Sons, Ltd.     

Richard Lester Solomon (1918–1995): Obituary.

Memorializes Richard Solomon, one of the major learning theorists of the 2nd half of the 20th century. Solomon was named the 1st James M. Skinner University Professor of Science in 1975, was elected to the National Academy of Sciences, and was awarded, among other honors, the Warren Medal for research by the Society of Experimental Psychologists, the American Psychological Association Distinguished Scientific Contribution Award, and the American Psychological Foundation's Award for Distinguished Teaching in Experimental Psychology. He conducted research on a broad array of topics such as word frequency and perceptual defense, children's estimation of the size of tokens, hoarding behaviors in rats, and personality ratings and sociometric patterns. His work made a major contribution to the exploration of Pavlovian conditioning. Other topics of research focused on in Solomon's laboratories included avoidance learning, learned helplessness, punishment, and the opponent-process theory of acquired motivation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of magnesium on the composition,microstructure and mechanical properties of carbon fibres

This work was undertaken in order to provide more detailed information on the chemical and mechanical behaviour of carbon fibres during the elaboration of graphite-magnesium composite materials. For this purpose, PAN-based T300, pitch-based P55 and P100 carbon fibres were isothermally heat treated, at temperatures ranging from 450 to 700 °C, under a saturated vapour pressure of magnesium. The composition, microstructure and tensile strength of the resulting samples were characterized by chemical and electron probe microanalysis, Raman spectrometry, X-ray diffraction and mechanical test of single filaments. From the results obtained, it has been concluded that highly graphitized fibres such as pitch-based P55 or P100 are not affected by long-time annealing in the presence of magnesium vapour, whereas impure and disorded fibres such as PAN-based T300 undergo some chemical and microstructural modifications decreasing their mechanical properties.     

Signal classification through multifractal analysis and complex domain neural networks

This paper describes a system capable of classifying stochastic self-affine nonstationary signals produced by nonlinear systems. The classification and the analysis of these signals are important because these are generated by many real-world processes. The first stage of the signal classification process entails the transformation of the signal into the multifractal dimension domain, through the computation of the variance fractal dimension trajectory (VFDT). Features can then be extracted from the VFDT using a Kohonen self-organizing feature map. The second stage involves the use of a complex domain neural network and a probabilistic neural network to determine the class of a signal based on these extracted features. The results of this paper show that these techniques can be successful in creating a classification system which can obtain correct classification rates of about 87% when performing classification of such signals without knowing the number of classes.     

Branching and pruning: An optimal temporal POCL planner based on constraint programming

A key feature of modern optimal planners such as graphplan and blackbox is their ability to prune large parts of the search space. Previous Partial Order Causal Link (POCL) planners provide an alternative branching scheme but lacking comparable pruning mechanisms do not perform as well. In this paper, a domain-independent formulation of temporal planning based on Constraint Programming is introduced that successfully combines a POCL branching scheme with powerful and sound pruning rules. The key novelty in the formulation is the ability to reason about supports, precedences, and causal links involving actions that are not in the plan. Experiments over a wide range of benchmarks show that the resulting optimal temporal planner is much faster than current ones and is competitive with the best parallel planners in the special case in which actions have all the same duration.¹     

A new binary accelerator system for the sulfur vulcanization of natural rubber latex

Vulcanization of latex products are usually carried out at lower temperatures compared to dry rubber products. It has been suggested that, in latex vulcanization systems where thiourea is used as a secondary accelerator, it acts as a nucleophilic reagent facilitating the cleavage of the sulfur bonds in the primary accelerator like TMTD or CBS at lower temperature. But no conclusive proof is given to such a postulate. In the present study 1-phenyl-2,4-thiobiuret (DTB II) and 1,5-diphenyl-2,4-dithiobiuret (DTB III), which are more nucleophilic than thiourea and which vary in their nucleophilic reactivity, were studied as secondary accelerators along with tetramethyl thiuram disulphide (TMTD) and N-cyclohexylbenzothiazyl sulphenamide (CBS) in the vulcanization of natural rubber latex. These binary systems were found to be very effective in reducing the optimum vulcanization time. Also it was noted that 1-phenyl-2,4-dithiobiuret, which is more nucleophilic, is more reactive (as observed from the reduction in optimum cure time) as a secondary accelerator, indicating a nucleophilic reaction mechanism in the vulcanization reactions under review. The optimum dosages of the secondary accelerators required were derived. Physical properties like tensile strength, 300% modulus, and elongation at break of the latex vulcanizates were also studied. There is a definite advantage with respect to many of these properties for dithiobiuret systems compared to the systems containing TMTD alone or TMTD/thiourea. DTB III gives higher values in many of these physical properties than DTB II. Chemical characterization of the vulcanizates was also carried out to correlate the physical properties with the type of chemical crosslinks formed. © 1993 John Wiley & Sons, Inc.