温度,压力对漂移室气体增益的影响

研究了温度及气体压力对漂移室（工作于正比区）气体放大倍数的影响，温度和气体压力的变化范围分别是５￣４０℃及９０￣１０５ｋＰａ。用实验数据拟合得到了函数关系并测量了几种饱和度下函数中的参数值。     

Using system dynamics for simulation and optimization of one coal industry system under fuzzy environment

In this paper, we have developed a model that integrates system dynamics with fuzzy multiple objective programming (SD-FMOP). This model can be used to study the complex interactions in a industry system. In the process of confirming sensitive parameters and fuzzy variables of the SD model, we made use of fuzzy multi-objective programming to help yield the solution. We adopted the chance-constraint programming model to convert the fuzzy variables into precise values. We use genetic algorithm to solve FMOP model, and obtain the Pareto solution through the programming models. It is evident that FMOP is effective in optimizing the given system to obtain the decision objectives of the SD model. The results recorded from the SD model are in our option, reasonable and credible. These results may help governments to establish more effective policy related to the coal industry development.     

Robust finite-time boundedness of multi-agent systems subject to parametric uncertainties and disturbances

In this paper, we consider finite-time control problems for linear multi-agent systems subject to exogenous constant disturbances and impulses. Some sufficient conditions are obtained to ensure the finite-time boundedness of the multi-agent systems, which could be then reduced to a feasibility problem involving linear matrix inequalities. Numerical examples are given to illustrate the results.     

铝带闭式四斜楔卷取机胀缩力计算分析

在现代化铝带冷轧机组中,卷取机卷筒通常采用闭式四斜楔卷筒结构,本文简要分析了闭式四斜楔卷筒的结构特点,并根据其结构特点总结了一种计算卷筒胀缩力和胀缩缸直径的计算方法。     

基于抽样方法的燃耗计算核素积存量不确定度分析

基于抽样基本原理研究了应用于燃耗计算的不确定度分析方法,并开发了燃耗计算不确定度分析程序。基于评价核数据库ENDF/B-Ⅷ.0的裂变产额标准差和衰变常量标准差计算得到了衰变常量协方差矩阵和带相关性的裂变产额协方差矩阵,并结合SCALE6.2程序包的56群反应截面协方差数据库,对Takahama-3压水堆组件基准题中SF95-4样品进行不确定度分析。计算了反应截面、衰变常量和裂变产额不确定度引起的核素积存量的不确定度。计算结果表明,反应截面的不确定度是锕系核素积存量不确定度的主要来源,裂变产额和衰变常量的不确定度对部分裂变产物的积存量会引入较大的不确定度。但考虑裂变产额相关性后,裂变产额引起的不确定度显著降低。     

深水J形首端PLET 安装分析

基于南海陵水17-2深水油气田开发,针对J形首端海底管道终端（Pipeline End Termination,PLET）安装,采用OrcaFlex软件开展数值模拟,研究波流载荷对安装系统的影响,以得到其作业窗口,并分析J形首端PLET安装过程中作业窗口的影响因素。结果表明,PLET在飞溅区和预着陆阶段比较危险,波浪周期约10 s波流同向横浪是安装作业的控制工况。研究内容为南海陵水17-2海底管道J形首端PLET安装提供了重要的技术支持。     

Investigation of Nitrite Production Pathway in Integrated Partial Denitrification/Anammox Process via Isotope Labelling Technique and the Relevant Microbial Communities

In this study,the nitrogen removal performance of partial denitrificaiton/anammox(PDA) process was investigated by using an UASB reactor.High total nitrogen(TN) removal efficiency(91.97%) was achieved at an influent nitrogen loading rate of 0.64 kg/(m³·d).Anammox bacteria did execute the function of converting nitrate to nitrite in PDA system according to ¹⁵N isotope labeling experiments and the contribution was approximately 36.3%.Candidatus＿Brocadia,Candidatus＿Kuenenia an...     

UpG法用于辐射损伤的量效关系研究

应用常规染色体制作法和紫外线照射加吉姆萨染色法(Ultraviolet plus GienlSa technology,UpG)检测经60Coγ射线离体照射后的人外周血淋巴细胞染色体畸变率(双着丝粒体 环),研究其剂量-效应关系,探讨UpG法用于辐射损伤的剂量估算效果.实验结果表明:两种方法得出的染色体畸变率与照射剂量密切相关(P<0.05),均可用于辐射损伤的量效关系研究.两种方法的结果相比,在同一照射剂量下,UpG法高于常规法,具有显著性差异(P<0.05).UpG法可以很好用于辐射损伤的剂量估算中,且较为准确、灵敏.