量子密码技术开辟通信安全新时代

量子密码技术被认为是绝对安全的加密技术。近年来,在美国、德国、日本和中国,相关研究都取得了明显进展。2004年6月,世界上第一个量子密码通信网络在美国马萨诸塞州剑桥城正式投入运行,标志着这一技术迈上了新台阶。据相关机构估算,量子保密通信系统一旦商用,将形成高达10亿美元的市场。     

锗γ能谱测量中的符合相加修正

本文介绍了锗γ能谱测量中符合相加修正的原理和方法,给出了修正公式。分别计算了不同几何条件下两个锗探测器对一些放射性核素的符合相加修正因子,估计了符合相加修正因子对活度测量结果的误差贡献。     

Integrated magnetic full wave converter with flexible output inductor

A new integrated magnetic full wave DC/DC power converter that provides flexible transformer design by incorporating an independent output inductor winding is introduced. The transformer is implemented on a traditional three-leg magnetic core. The inductor winding can be separately designed to control the output current ripple. The cross-sectional area of the inductor core leg can be reduced dramatically. The operation and performance of the proposed circuit are verified on a 100 W prototype converter.     

A high resolution negative working resist,LMR-UV,for g- and i-line lithography

LMR-UV (“low molecular weight resist for uv lithography”), a naphthoquinone-diazide sulfonic acid ester of a novolak resin, is a negative working resist. The mechanism of insolubilization of LMR-UV is based on the facts that the naphthoquinone-diazide moiety is decomposed to indenecarboxylic acid (polar compound) by photolysis upon UV irradiation and that the irradiated resist film insolubilizes in a non-polar developer. LMR-UV reliably forms 0.6 μm lines and spaces over a reflective substrate with steps by using a g-line stepper having a 0.35 NA lens. 0.6 μm-wide aluminum patterns over topography are obtained by use of g-line exposure and reactive ion etching. By use of an i-line aligner (NA = 0.42), LMR-UV resolves 0.25 μm space patterns with overhang profiles. The profiles are due to the large absorption coefficient of 3.8 μm^?1. 0.3 μm wide aluminum patterns are formed by i-line exposure and lift-off metallization.     

Electromagnetic properties of ferroelectric-ferrite ceramic composites

The NiFe₂O₄ and Pb(Zr_0.52Ti_0.48)O₃ ceramic composites are prepared by conventional solid state reaction method. The microstructural and morphological properties of the composites are studied by X-ray diffraction analysis and scanning electron microscopy. Results indicate that the ferrite and piezoelectric phases can co-exist in the composites. The relationship between the dielectric constant and frequency (40 Hz–40 MHz) as well as temperature is also investigated. It is noted that the transition temperature of the composites is about 380 °C. A double electric hysteresis loop is observed in our composites. The magnetic properties are relatively weak according to the magnetic hysteresis loop. With increase in the content of the ferrite phase, the permeability increases. The electromagnetic properties of the as-prepared composites are tunable according to the content of the NiFe₂O₄ phase.     

Studies of substrate specificities of lipases from different sources

Although lipases are widely applied in a wide variety of reactions, available information on the factors that are responsible for the substrate specificities of lipases from different sources is scarce. In this paper, nine lipase‐producing microorganism strains were isolated from oil‐containing samples. The properties of these enzymes, including pH optima, temperature optima, thermal stability, and pH stability, vary significantly with the different sources from which these lipases were isolated. The substrate specificities of the nine lipases, including fatty acid and positional specificities, were also studied. The fatty acid specificities of the nine lipases were observably different toward 15 substrates with different carbon chain lengths, different saturation degrees and different side chains. The lipases from S₃ Penicillium citrinum (PCL), MJ₁ Aspergillus niger (ANL), MJ₂ Aspergillus oryzae (AOL), YM Bacillus coughing (BCL), S₉ Geotrichum candidum (GCL), and S₁₁ Candida lypolytica (CLL) showed the strongest specificities to short‐chain esters, and the other lipases showed strong selectivity for medium‐ or long‐chain and branched esters. The positional specificities were examined by analyzing the hydrolytic products of triolein catalyzed by the nine lipases, using TLC. The lipases can be mainly classified into two groups by their specificities for the ester bond at position 2 of triglycerides; one group can selectively hydrolyze the ester bond at position 2 of the triglycerides, the other group cannot. All these nine lipases were divided into four groups by hierarchical clustering analysis on the basis of the results of fatty acid and positional specificities.     

激光光束质量因子的研究进展

本文详细分析了各种光场下光束质量M2因子。在不同的场中,A.E.Siegman当初所定义的M2因子,已经有了很大的变化,因而M2因子的特性也与当初不同,不仅M2因子可以大于等于1,而且可以小于1,甚至小于0。其反映的物理意义,也从经典场中的衍射极限倍数,变化为非经典场中的准直性量度以及对空间相干性的某些反映。此外还列举并分析了几种特殊的光束质量因子,最后讨论了M2因子应用的问题并指出了其局限性。     

丝状真菌纤维素酶合成机制的研究

丝状真菌产生的纤维素酶被认为是最有应用前景的,但就目前酶生产效率来看,离实际应用还有很大的差距,需要对酶的合成调节机制有更为全面和深刻的了解。纤维素酶的生物合成受诱导和阻遏双重控制,酶的生产既有赖于低廉的保持一定浓度诱导物的存在,又必须清除分解代谢产物对酶合成的阻遏,其中的详细机制有待进一步的阐明。真菌纤维素酶的分泌也是相当复杂的,在酶的分泌过程中,酶会发生例如糖基化等一系列变化。提高纤维素酶的活力测定方法的准确性,使其进一步规范化,是研究纤维素酶工作的另外一个重要的领域。随着现代生物学朝着分子水平的不断发展,分子生物学的许多方法也越来越多地被应用于纤维素酶的研究中,并取得了重要进展。对真菌纤维素酶合成调节机制的深入研究,将为提高纤维素酶产量,推动应用工作的发展打下理论基础。