TEM Studies of High Temperature Corrosion Behaviour of TiAl Intermetallics with Surface Modifications

The oxidation/sulphidation behaviour of a Ti‐46.7Al‐1.9W‐0.5Si alloy with a TiAl₃ diffusion coating was studied in an environment of H₂/H₂S/H₂O at 850^oC. The kinetic results demonstrate that the TiAl₃ coating significantly increased the high temperature corrosion resistance of Ti‐46.7Al‐1.9W‐0.5Si. The SEM, EDX, XRD and TEM analysis reveals that the formation of an Al₂O₃ scale on the surface of the TiAl₃‐coated sample was responsible for the enhancement of the corroison resistance. The Ti‐46.7Al‐1.9W‐0.5Si alloy was also modified by Nb ion implantation. The Nb ion implanted and as received sampels were subjected to cyclic oxidation in an open air at 800^oC. The Nb ion implantation not only increased the oxidation resistance but also substantially improved the adhesion of scale to the substrate.     

Early modifications of chemokine production and mRNA expression during rush venom immunotherapy

The mechanism by which specific immunotherapy exerts its beneficial effect remains unclear. Chemokines are implicated in inflammatory and allergic diseases, in particular via their ability to induce histamine release from basophils, a potential early target of rush venom immunotherapy (RVIT), In this study, the authors evaluated ex vivo regulated upon activation normal T-cell expressed and secreted (RANTES), interleukin 8 (IL-8) and monocyte chemoattractant protein 1 (MCP-1) production and mRNA expression by mononuclear cells (MNC) from nine patients undergoing a 3.5-h ultra rush treatment, before treatment at Day 0 (D0), at the end of the 3.5-h of the rush at Day 4h (D4h), at Day 15 (D15) and Day 45 (D45) after treatment. Increased RANTES release and mRNA expression were observed in 24-h culture of peripheral blood MNC collected at D4h. This was followed by a decrease in the production of RANTES, IL-8 and MCP-1, 45 days after initiation of RVIT. The same pattern was observed after in vitro venom stimulation of MNC. At the mRNA level, similar profiles were observed except for IL-8 mRNA which inversely increased during RVIT. These results suggest that RVIT is associated with a general decrease in chemokines which may explain, in part, the clinical efficacy of specific immunotherapy.     

Modeling the large‐strain constitutive behavior of polycarbonate under isothermal and anisothermal conditions

The tensile behavior of polycarbonate was studied at large strains below the glass‐transition temperature. Experiments were carried out at a series of constant temperatures and also under conditions of falling temperatures. The specimens necked with a natural draw ratio of approximately 2, and the study was mainly focused on the necked material. Isothermal experiments revealed an elastic mechanism that initiated beyond the natural draw ratio. A model consisting of an Eyring process and two Gaussian elastic mechanisms was found to be applicable to both the isothermal and anisothermal stress‐relaxation and stress–strain results. The same model also produced reasonable estimates of the stresses generated during the necking process. In addition, a simple relationship between the isothermal and anisothermal stress relaxation was demonstrated. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2105–2116, 2005     

Studies of microhardness and mar resistance using a scanning probe microscope

Scanning probe microscopy (SPM) is in a period of rapid development. It shows great promise for characterizing coating surfaces. This paper describes modification of an SPM so that it can be used to mar the surfaces of coatings under controlled conditions and to characterize the mars. Mar resistance of coatings is analyzed in terms of a ‘three response, two mechanism model.' The three responses (fracture, elastic, and plastic) can be measured quantitatively using the SPM. Of the three responses, only two (fracture and plastic deformation) are marring mechanisms – elastic deformations recover instantaneously. In some cases mars resulting from plastic deformation may recover slowly with time or with immersion in water; this phenomenon is attributed to viscoelastic creep. Microhardness is also measured with the modified SPM. Some thermoset coatings appear to be substantially harder near their surfaces than in the mass of material, and such materials may respond quite differently to stress applied at different levels near the surface. This finding has important implications for all coating properties that are strongly influenced by the surface. A quantity called ‘micro mar resistance' is defined. It may be useful for comparing different coatings under specified conditions of marring. However, there can be no single quantity that expresses ‘mar resistance' of a coating under all conditions.     

Extended input-output models: progress and potential

"This article presents a critical survey of research on extended input-output models, emphasizing recent developments in demographic-economic and socio-economic analysis. Basic principles of model design and construction are reviewed, by reference to a representative selection of extended models. Two research themes--labor market analysis and income distribution--are pursued in greater detail as examples of the directions of current work. A comparison is made between extended models and social accounting matrices."