ADI-FDTD Method With Fourth Order Accuracy in Time

This letter presents an unconditionally stable alternating direction implicit finite-difference time-domain (ADI-FDTD) method with fourth order accuracy in time. Analytical proof of unconditional stability and detailed analysis of numerical dispersion are presented. Compared to second order ADI-FDTD and six-steps SS-FDTD, the fourth order ADI-FDTD generally achieves lower phase velocity error for sufficiently fine mesh. Using finer mesh gridding also reduces the phase velocity error floor, which dictates the accuracy limit due to spatial discretization errors when the time step size is reduced further.     

Computer analysis,design and simulation of horizontal ground heat exchangers

This paper presents a new computerized procedure for dealing with the design of horizontal ground heat exchangers (HGHE). The computer program is based on the transient model of coupled nonlinear partial differential equations governing heat and mass flow in soils. The model is two-dimensional and delineates the operation of ground heat storage with the HGHE and such phenomena as freezing/thawing and drying/rewetting of soil moisture. Comprehensive climatological data, such as ambient temperature, solar radiation, wind velocity, rainfall, snowfall, snow characterstics, and water vapour pressure is used to simulate conditions at the ground surface over any required length of time. The package can be applied to any geographical location by changing climatic and soil data input. The designer has the possibility of selecting any of 12 types of soils from sand to clay, 12 commercial heat pumps, nine different configurations of the HGHE, 16 plastic pipes for ground coils, and 13 ground coil fluids. The program, however, does not calculate the length of the HGHE but it evaluates the thermodynamic performance of a ground heat pump system and provides comprehensive data on thermal and hydraulic conditions in ground heat storage. The length of the ground heat exchanger is obtained from a line source theory model or from site dimensions and pipe spacing. Computed results for ground heat exchanger operation correlate fairly well with experimental data. Simulation of temperature and moisture content in the ground for natural conditions (no heat extraction/deposition) showed a fair agreement with field data. The entire computer program is user-friendly, interactive, menu-driven, and written in FORTRAN 77.     

Study of the use of vitamin K in neonates in France

Our objective was to assess flow velocity waveforms of the portal venous system of the anemic fetus prior to and immediately following intravascular transfusion. Color-guided pulsed Doppler was used to obtain flow velocity waveforms from the fetal portal vein in 14 anemic fetuses that were transfused in utero for rhesus alloimmunization The portal vein velocity pattern was defined as continuous when no change in velocity during the cardiac cycle was noted. It was defined as pulsatile when a deflection of the wave was present. The flow velocity waveforms were quantified by using the ratio between the peak (highest, H) and the nadir (lowest, L) velocities (H/L ratio). Fourteen intravascular transfusions were performed. Gestational age ranged from 19.5 to 35 weeks (mean +/- SD, 26.7 +/- 5.3 weeks). The hematocrit ranged from 5.9 to 31.2% (mean +/- SD, 20.3 +/- 9%) prior to transfusion; after transfusion it was between 24.8 and 56.7% (mean +/- SD, 42 +/- 10.4%). In six cases (43%) the waveforms were pulsatile prior to transfusion; in the other eight (57%) they were continuous. The pulsatile pattern was present following transfusion in 13 cases (93%, p < 0.05). The mean of the H/L ratio was 1.3 +/- 0.38 prior to transfusion and 2.0 +/- 0.86 after transfusion (p < 0.05). Because the portal vein has continuous non-pulsatile flow in the normal fetus, the presence of pulsatility in the waves of six anemic fetuses (43%) may suggest portal hypertension. Compared to normal fetuses, there was an increased number of cases with pulsation, and even more so after transfusion. The pattern corresponds to findings in children with portal hypertension.     

Exploratory analysis of brain connectivity with ICA.

Covariance-based methods of exploration of functional connectivity of the brain from functional magnetic resonance imaging (fMRI) experiments, such as principal component analysis (PCA) and structural equation modeling (SEM), require a priori knowledge such as an anatomical model to infer functional connectivity. In this research, a hybrid method, combining independent component analysis (ICA) and SEM, which is capable of deriving functional connectivity in an exploratory manner without the need of a prior model is introduced. The spatial ICA (SICA) derives independent neural systems or sources involved in task-related brain activation, while an automated method based on the SEM finds the structure of the connectivity among the elements in independent neural systems. Unlike second-order approaches used in earlier studies, the task-related neural systems derived from the ICA provide brain connectivity in the complete statistical sense. The use and efficacy of this approach is illustrated on two fMRI datasets obtained from a visual task and a language reading task.     

Microwave techniques for diagnostic laboratories

Microwaves (MWs) were first introduced as a method of fixation just over 20 years ago. In recent years their use has extended far beyond that of a safe, clean and rapid method of fixation of tissue blocks and large specimens, including brains. MWs accelerate the action of cross-linking fixatives and can greatly accelerate the various stages of tissue processing to produce a paraffin block in 30 min. An extensive range of ultrafast MW-stimulated special stains has been developed, and immunohistochemical procedures can be completed in 20 min by employing MWs. Cellular antigens are distinctly better preserved in tissues fixed by MWs than by conventional cross-linking fixatives. Also, the cytomorphology of cryostat sections irradiated in Wolman's solution is clearly improved. MWs can similarly be applied for fixation and staining of preparations for transmission and scanning electron microscopy, and they also greatly accelerate polymerisation of resins. In the current climate of cost containment, this wide range of applications makes the MW oven an invaluable addition to the diagnostic laboratory.     

Designing the MPC105 PCI bridge/memory controller

The MPC105 peripheral component interconnection bridge/memory controller provides a platform-specification-compliant bridge between Power PC microprocessors and the PCI bus. With it, designers can create systems using peripherals already designed for a variety of standard PC interfaces. This bridge chip also integrates a secondary cache controller and high-performance memory controller that supports DRAM or synchronous DRAM and ROM or flash ROM