Abrasion Resistance of Field-Assisted Ion-Exchanged Glass

The fracture strength of HF-etched samples was measured as a function of field-assisted K-Na ion exchange depth, as well as the severity of abrasion. As expected, the more severe the abrasion, the greater the depth required to make the strength insensitive to abrasion. An abrasion-independent weakening mechanism that increased with exchange depth was also found to be operative.     

Reaction of pyritic sulphur in coal with lime and calcined dolomite during the coking process

Various reactions occur between pyrite (FeS₂) in coal and CaO to form CaS when a finely pulverized intimate mixture of coal and CaO is coked at 900 °C in an inert atmosphere. The effectiveness of lime and calcined dolomite (CaO.MgO) in promoting this reaction has been evaluated; calcined dolomite is somewhat more effective than lime over coal/ oxide weight ratios from 2.8 to 14. The degree of conversion of pyrite to calcium sulphide at a coal/calcined dolomite weight ratio of 7 has been determined as a function of time at 900 °C; coking time in excess of 2.5 h does not have a significant effect. It has been shown that the total sulphur lost on coking coal/lime mixtures decreases and the percentage of FeS, originating from the dissociation of pyrite, converted to CaS increases as the amount of lime added increases. But although the total sulphur content of coke produced in the presence of CaO is then higher than when the coal is coked without lime, the pyritic sulphur has been converted to CaS which is more amenable to chemical conversion to H₂S. A method is outlined for determining CaS in the coked mixture in the presence of FeS.     

Diterpene resin acids: Major active principles in tall oil against Variegated cutworm,Peridroma saucia (Lepidoptera: Noctuidae)

Tall oil, a by-product of the kraft process for pulping softwood, has been shown to have insecticidal properties. In the present study, the active principles in tall oil against the variegated cutworm,Peridroma saucia Hübner, were investigated. GC-MS analysis showed that abietic, dehydroabietic, and isopimaric acids were major resin acid components of crude tall oil and depitched tall oil. When crude tall oil samples of differing resin acid composition were incorporated into artificial diet at a concentration of 2.0% fresh weight, they suppressed larval growth by 45–60% compared to controls. This suppression was significantly (P0.05) correlated with the equivalent contents of abietic, dehydroabietic, isopimaric, and total resin acids. These results were also evident from a diet choice test, showing that the second-instar larvae obviously selected diets with low levels of resin acids when different diets were randomly arranged in a Petri dish. Bioassays with pure resin acids (abietic, dehydroabietic, and isopimaric acids) demonstrated that all individual chemicals have similar bioactivity against this insect. Comparison of the bioactivities of depitched tall oil and an equivalent mixture of pure resin acids in thePeridroma chronic growth bioassay indicated that pure resin acids and depitched tall oil share a common mode of action to this insect. This study confirms that resin acids are major active principles in tall oil against the variegated cutworm, but other chemicals likely also contribute to the bioactivity of tall oil.     

New ISFET interface circuit design with temperature compensation

An integrated and new interface circuit with temperature compensation has been developed to enhance the ISFET readout circuit stability. The bridge-type floating source circuit suitable for sensor array processing has been proposed to maintain reliable constant drain-source voltage and constant drain current (CVCC) conditions for measuring the threshold voltage variation of ISFET due to the corresponding hydrogen ion concentration in the buffer solution. The proposed circuitry applied to Si₃N₄ and Al₂O₃-gate ISFETs demonstrate a variation of the drain current less than 0.1 μA and drain-source voltage less than 1 mV for the buffer solutions with the pH value changed from 2 to 12. In addition, the scaling circuitry with the V_T temperature correction unit (extractor) and LABVIEW software are used to compensate the ISFET thermal characteristics. Experimental results show that the temperature dependence of the Si₃N₄-gate ISFET sensor improved from 8 mV/°C to less than 0.8 mV/°C.     

High‐Throughput Fabrication of Au–Cu Nanoparticle Libraries by Combinatorial Sputtering in Ionic Liquids

Materials libraries of binary alloy nanoparticles (NPs) are synthesized by combinatorial co‐sputter deposition of Cu and Au into the ionic liquid (IL) 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₁C₄im][Tf₂N]), which is contained in a micromachined cavity array substrate. The resulting NPs and NP‐suspensions are investigated by transmission electron microscopy (TEM), X‐ray diffraction (XRD), UV‐Vis measurements (UV‐Vis), and attenuated total reflection Fourier transformed infrared (ATR‐FTIR) spectroscopy. Whereas the NPs can be directly observed in the IL using TEM, for XRD measurements the NP concentration is too low to lead to satisfactory results. Thus, a new NP isolation process involving capping agents is developed which enables separation of NPs from the IL without changing their size, morphology, composition, and state of aggregation. The results of the NP characterization show that next to the unary Cu and Au NPs, both stoichiometric and non‐stoichiometric Cu–Au NPs smaller than 7 nm can be readily obtained. Whereas the size and shape of the alloy NPs change with alloy composition, for a fixed composition the NPs have a small size distribution. The measured lattice constants of all capped NPs show unexpected increased values, which could be related to the NP/surfactant interactions.     

A holographic transform domain image watermarking method

A transform domain image tagging orwatermarking method that survives image cropping (and, hence, is holographic) was proposed at Bell Labs in September 1994. This report analyzed in detail the various properties of this method and introduces an optimal procedure for watermark recovery.     

ATM‐based wireless broadband access in the local loop

Broadband networks using wireless transmission techniques are a quick and flexible means of implementing subscriber access. Unoccupied frequency bands with sufficient bandwidth to allow the transmission of digital signals at very high bit rates are found only in the microwave bands. Because the path loss is fairly high at these frequencies, the diameter of radio cells is limited to a maximum of a few kilometres. This results in a microcellular system, which is best implemented in the form of a point‐to‐multipoint system, where one radio‐base station serves all subscribers registered in that radio cell. An interactive, broadband, ATM‐based radio local loop has undergone successful trials in Munich. Copyright © 2001 John Wiley & Sons, Ltd.     

如何实现高功率密度的工业电源

工业电源必需满足一些特殊的要求,如低功耗（以减轻机箱冷却方面的负担）、高功率密度（以减小空间要求）、高可靠性和高耐用性,以及其它在普通电源中不常见的特性,如易于并联、遥控和某些过载保护功能等。