Exploring the possibilities of using Brazilian subbituminous coals for blast furnace pulverized fuel injection

The current study investigates the combustion and blast furnace injection performance of three Brazilian subbituminous coals (Mina do Recreio) and their beneficiation products using laboratory scale combustion tests. The coals have relative high ash yields (up to 40 wt%) that were reduced stepwise to levels as low as 12 wt%, dry basis. The reduction of ash yields is paralleled by a significant decrease in sulphur and inertinite contents.The combustion tests were performed in a drop tube reactor operating at 1300 °C using two different atmospheres (2.5 and 5% O₂). The chars exhibited preferentially rounded shapes with thick walls and abundant secondary porosity for the 2.5% O₂ chars, whereas the 5% O₂ chars showed very thin walls as a consequence of extensive burnout. The intrinsic reactivities of both set of chars were similar. The differences in conversion between the two working atmospheres were 24-37% and roughly tend to increase with increasing mineral matter content. Conversions as high as 76-81% were reached operating under 5% O₂ indicating that the coals are easy to burn. The small differences in burnout among the coals and their beneficiation products cannot be clearly attributed neither to mineral matter or inertinite content. A rough inverse relationship was found between the intrinsic reactivity of the chars and the inertinite content of the parent coal indicating that the char material derived from inertinite was intrinsically less reactive than that derived from vitrinite. These differences were no longer relevant at high temperature.Blast furnace injection performance was studied through thermobalance experiments using CO₂ atmosphere and 1050 °C temperature. It is apparent that the beneficiation process has no effect on the reactivity of the coals from Recreio Mine. The only exception is the low ash coal-2-LabB (11.5 wt%), for which a higher reactivity is indicated. The reactivity tests show also that the coals have adequate properties to be used together with imported coal blends in pulverized coal injection in the blast furnace (PCI).     

Key factors that influence the UX of a dual-player game for the cognitive stimulation and motor rehabilitation of older adults

Universal Access in the Information Society - In this work, the results of usability and user experience (UX) evaluation of a serious video game for the cognitive stimulation and motor...     

Ion-cleaning damage in (100) GaAs,and its effect on schottky diodes

This study investigates the effect of ion cleaning damage of (100) GaAs in the 100–1000 eV range, and also its recovery with thermal annealing to 400°C. It is shown that GaAs could be annealed to a considerable extent if the ion-damage was ? 100 eV. However, full recovery was not achieved. On the other hand, samples damaged at ? 400 eV became progressively worse with annealing. Measurements indicate that these samples are dominated by the effect of arsenic variances within the bulk. These remain in the bulk, but are distributed spatially upon annealing. They behave as deep donors, so that the net electron concentration in the bulk is enhanced. Aluminum-n GaAs Schottky diodes were used as a vehicle for this study.     

Minimizing test-point allocation to improve diagnosability in business process models

Diagnosability analysis aims to determine whether observations available during the execution of a system are sufficient to precisely locate the source of a problem. Previous work deals with the diagnosability problem in contexts such as circuits and systems, but no with the adaptation of the diagnosability problem to business processes. In order to improve the diagnosability, a set of test points needs to be allocated. Therefore, the aim of this contribution is to determine a test-point allocation to obtain sufficient observable data in the dataflow to allow the discrimination of faults for a later diagnosis process. The allocation of test points depends on the strategies of the companies, for this reason we defined two possibilities: to improve the diagnosability of a business process for a fixed number of test points and the minimization of the number of test points for a given level of diagnosability. Both strategies have been implemented in the Test-Point Allocator tool in order to facilitate the integration of the test points in the business process model life cycle. Experimental results indicate that diagnosability of business processes can be improved by allocating test points in an acceptable time.     

Specific recognition of HLA-E, but not classical, HLA class I molecules by soluble CD94/NKG2A and NK cells

The CD94/NKG2 receptors expressed by subpopulations of NK cells and T cells have been implicated as receptors for a broad range of both classical and nonclassical HLA class I molecules. To examine the ligand specificity of CD94/NKG2 proteins, a soluble heterodimeric form of the receptor was produced and used in direct binding studies with cells expressing defined HLA class I/peptide complexes. We confirm that CD94/NKG2A specifically interacts with HLA-E and demonstrate that this interaction is dependent on the association of HLA-E with peptide. Moreover, no interaction between CD94/NKG2A and classical HLA class I molecules was observed, as assayed by direct binding of the soluble receptor or by functional assays using CD94/NKG2A+ NK cells. The role of the peptide associated with HLA-E in the interaction between HLA-E and CD94/NKG2A was also assessed. All class I leader sequence peptides tested bound to HLA-E and were recognized by CD94/NKG2A. However, amino acid variations in class I leader sequences affected the stability of HLA-E. Additionally, not all HLA-E/peptide complexes examined were recognized by CD94/NKG2A. Thus CD94/NKG2A recognition of HLA-E is controlled by peptide at two levels; first, peptide must stabilize HLA-E and promote cell surface expression, and second, the HLA-E/peptide complex must form the ligand for CD94/NKG2A.