Metamagnetic shape memory alloys are a unique class of materials capable of large magnetic field-induced strain due to reverse martensitic phase transformation. A precondition for large shape change is martensite deformation, which heavily depends on microstructure. Elucidation of microstructure is therefore indispensable for strain control and deformation mechanics in such systems. The current paper reports on a self-accommodated martensitic microstructure in metamagnetic Ni50Mn37.5Sn12.5 single crystal. The microstructure here is hierarchically organised at three distinct levels. On a large scale, martensite plate colonies, distinguished by intercolony boundaries, group individual martensitic plates. Plates are separated by interplate boundaries and deviate by 2.2° from an ideal twin relation. On the lower scale, plates are composed of subplate twins. Conjugation boundaries separating two pairs of twins arise in relation to a subplate microstructure. Modulation boundaries separating two variants with perpendicular modulation directions and with parallel c-axes also appear. Mechanical training frees larger plates from fine subplate microtwins bringing macro-lamellae into twin relation, what then permits further detwinning until a single variant state. 相似文献
Mobile type I and type II twin boundaries mediating the magnetic field-induced strain in five-layered modulated (10M) Ni–Mn–Ga martensite were analyzed by electron backscatter diffraction. Taking into account the slight monoclinic distortion of the pseudo-tetragonal lattice, the electron backscatter diffraction study reveals domains of 0.01–1 mm thickness adjacent to the type I and type II twin boundaries. The domains differing in the modulation direction are {1 0 0) compound twins and their effect on twinning stress is discussed. Detailed analysis of type II twin boundary reveals that the domains are further internally twinned by compound {1 1 0) twins 1–15 μm in size. An additional example of a complex twin microstructure combining type I and type II twin boundaries is presented. 相似文献
10M Ni–Mn–Ga polycrystals show a typical self-accommodated microstructure consisting of macro and micro twins. The macro twin lamellae separate micro twins creating a so-called “twins within twins” microstructure. Such a configuration allows the distribution of martensitic variants with no net change in shape of the sample. The arrangement of variants can occur on different length scales, from a few nanometers up to a few millimeters, not only depending on grain size but also on processing condition (e.g., extrusion, torsion). Small austenite grains do not completely transform to martensite giving rise to some residual austenite. Furthermore, characteristic branching of macro and micro twins is observed due to lowering of the elastic energy at grain and macro twin boundaries, respectively. 相似文献
Ni–Mn–Ga single crystals can produce large strain in moderate magnetic fields. It is the scope of this article to demonstrate, that also polycrystalline materials can show strain in a magnetic field, so called MFIS (magnetic field‐induced strain). In order to design functional polycrystalline materials the interactions of twin boundaries and grain boundaries have to be understood. Therefore, different ways of introducing a texture into Ni–Mn–Ga polycrystals are presented. The different kinds of texture and the consequences for the corresponding materials are discussed. Moreover, thermal, magnetic, and/or mechanical training concepts are presented and their working principle is explained. Several possibilities of evaluating the MFIS capability of the resulting samples are displayed. Finally methods of increasing the strain further are discussed. 相似文献
There is still a lack of understanding of deformation mechanisms in nanocrystalline (nc) materials. Studies on microstructures
formed in nc Pd–10% Au (grain size about 15 nm) after high pressure torsion revealed signatures of various deformation processes
as cooperative grain boundary sliding (GBS), shear banding, dislocation slip and twinning. In order to estimate contributions
of these processes to total strain, a comparison was made between torsion textures formed in nc and coarse grained (cg) samples
after identical shear strain. The textures were measured with synchrotron radiation. Intensities of characteristic components
of the shear texture are two times stronger in the cg sample than in the nc one, indicating that dislocation slip is less
significant in the nc sample. It is proposed that numerous planes of cooperative GBS revealed by TEM contribute to plasticity
of nc alloy. 相似文献
The microstructure and phase composition of Al/Ti/Al interfaces with respect to their localization were investigated. An aluminum-flyer plate exhibited finer grains located close to the upper interface than those present within the aluminum-base plate. The same tendency, but with a higher number of twins, was observed for titanium. Good quality bonding with a wavy shape and four intermetallic phases, namely, TiAl3, TiAl, TiAl2, and Ti3Al, was only obtained at the interface closer to the explosive material. The other interface was planar with three intermetallic compounds, excluding the metastable TiAl2 phase. As a result of a 100-hour annealing at 903 K (630 °C), an Al/TiAl3/Ti/TiAl3/Al sandwich was manufactured, formed with single crystalline Al layers. A substantial difference between the intermetallic layer thicknesses was measured, with 235.3 and 167.4 µm obtained for the layers corresponding to the upper and lower interfaces, respectively. An examination by transmission electron microscopy of a thin foil taken from the interface area after a 1-hour annealing at 825 K (552 °C) showed a mixture of randomly located TiAl3 grains within the aluminum. Finally, the hardness results were correlated with the microstructural changes across the samples.