60m高度处单片露天超高混凝土悬臂墙的设计与施工

通过采用竖向预应力技术 ,解决了 60m高度处单片 8m高悬臂钢筋混凝土墙根部裂缝宽度超过规范限值的问题 ;采用将预应力钢绞线顶端锚固于墙高中段等结构和施工措施 ,控制墙体长细比不超过 3 0 ,减少了由于长细比过大对墙体承载力的不利影响     

Do We Stand on Common Ground? A Threat Appraisal Model for Terror Alerts Issued by the Department of Homeland Security

The fabric and faces of threat, and the expediency and efficiency in the communication of threat, are examined with a threat appraisal model. This model is empirically tested on an ongoing communication challenge, the issuance of terror alerts by the United States' Department of Homeland Security (DHS), focusing on how threat is appraised by both the conservative and liberal audiences. Findings showed a shared view by the DHS and conservative audiences on the levels and nature of threats; liberal audiences thought otherwise. Though there appeared to be a consensus between the conservative and liberal audiences on the efficacy of threat communication, more internal consistency within DHS is needed to optimise its effectiveness.     

Multivariable controller design in an adaptive control scheme

A multivariable control system design approach in the frequency domain is presented. The issue of control system redesign in an adaptive control scheme is discussed. Expert system techniques have been used for the automated design of controllers for multivariable systems. Design knowledge has been represented using rules, facts and objects. The design process consists of a sequence of operations obtained by heuristics and experience in the the design techniques. An automated design session of a multivariable plant using the expert system demonstrates that the expert system appears to work well in its prototype implementation.     

Noncontact knee dislocation in a female basketball player: a case report

Knee ligamentous injuries occur during sport, and when there is extensive injury, they can be associated with subluxation or dislocation. We present the case of a female basketball player who sustained a knee dislocation during noncontact play. An immediate angiogram confirmed vascular integrity, and surgical treatment with ligamentous reconstruction was performed. Peroneal nerve injury was present but resolved in 42 weeks. A review of the literature discussing knee dislocation is presented.     

Effect of Stress State on Growth of Interfacial Intermetallic Compounds Between Sn-Ag-Cu Solder and Cu Substrates Coated with Electroless Ni Immersion Au

Excessive intermetallic compound (IMC) growth in solder joints will significantly decrease the reliability of the joints. IMC growth is known to be influenced by numerous factors during the component fabrication process and in service. It is reported that, other than temperature and holding time, stress can also influence the IMC growth behavior. However, no existing method can be used to study the effect of stress state on IMC growth in a controlled manner. This paper presents a novel method to study the effect of stress on interfacial IMC growth between Sn-Ag-Cu solder and a Cu substrate coated with electroless Ni immersion Au (ENIG). A C-ring was used and in-plane bending induced tensile and compressive stresses were applied by tightening the C-ring. Results revealed that in-plane compressive stress led to faster IMC growth as compared with in-plane tensile stress.     

Microfabricated preconcentrator-focuser for a microscale gas chromatograph

The design, fabrication, and testing of a preconcentrator-focuser (PCF), consisting of a thick micromachined Si heater packed with a small quantity of a granular adsorbent material are described. The PCF is developed to capture and concentrate vapors for subsequent focused thermal desorption and analysis in a micro gas chromatograph. The microheater contains an array of high-aspect-ratio, etched-Si heating elements, 520 /spl mu/m (h)/spl times/50 /spl mu/m (w)/spl times/3000 /spl mu/m (l), bounded by an annulus of Si and thermally isolated from the remaining substrate by an air gap. This structure is sandwiched between Pyrex glass plates with inlet/outlet ports that accept capillary tubes for sample flow and is sealed by anodic bonding (bottom) and rapidly annealed glass/metal/Si solder bonding (top). The large microheater surface area allows for high adsorption capacity and efficient, uniform thermal desorption of vapors captured on the adsorbent within the structure. The adsorbent consists of roughly spherical granules, /spl sim/200 /spl mu/m in diameter, of a high-surface-area, graphitized carbon. Key design considerations, fabrication technologies, and results of performance tests are presented with an emphasis on the thermal desorption characteristics of several representative volatile organic compounds as a function of volumetric flow rates and heating rates. Preconcentration factors as high as 5600 and desorbed peak widths as narrow as 0.8 s are achieved from 0.25-L samples of benzene at modest heating rates. The effects of operating variables on sensitivity, chromatographic resolution, and detection limits are assessed. Testing of this PCF with a micromachined separation column and integrated sensor array is discussed briefly.     

CS_2中毒法研究Pt-Al_2O_3系催化剂活性中心的性质

本文对金属催化剂活性中心性质提出了新的表征方法,即用活性频率量度活性中心的强度,用原子组合数的概念描述原子组成活性中心的方式,在此基础上提出了活性频率和活性中心原子组合数的计算公式与新的测定方法。 从测出的活性频率和活性中心原于组合数的数据,发现了Pt-Al_2O_3催化剂具有两种活性中心即α和β中心。α中心CS_2的吸附能力比β中心强,但β中心对环己烷的脱氢活性比α中心强。同时证明了不管在α中心或在β中心上环己烷的脱氢反应都是在双位中心上进行的。 本文还考察了锡和铼对铂催化剂性能的影响,实验表明锡和铼都能从结构效应和电子效应方面影响铂的催化性能。     

ERP软件管理技术在我国的应用分析

随着科技的高速发展,现代化的建设中不可缺少的运用多种管理软件,ERP作为一种新型的企业管理模式系统,是信息时代的高级管理方式,在企业的各项管理运作中优化组合,提高了管理能力.本文就EKP软件在我国的应用进行了简单的分析.     

PLC在组合机床控制中的应用

本文介绍了PLC对组合机床的控制,分析了其工作原理,详细介绍了其硬件配置和软件设计.