激光熔区中应力缓解的X射线衍射法测定

AISI 304奥氏体不锈钢表面经激光熔化处理,引入一个大的张应力,它可用注Ne的方法使其缓解本文介绍测量0.1μm薄层应力变化的原理和技术,由测得的应力分布曲线证明了注Ne缓解表面张应力的效果     

Gridded Aclar: preparation methods and use for correlative light and electron microscopy of cell monolayers,by TEM and FIB–SEM

Aclar, a copolymer film with properties very similar to those of tissue culture plastic, is a versatile substrate to grow cells for light (including fluorescence) and electron microscopic applications in combination with both chemical fixation and cryoimmobilization. In this paper, we describe complete procedures to perform correlative light and electron microscopy using Aclar as substrate for the culture of cell monolayers to be finally embedded in plastic. First, we developed straightforward, efficient and flexible ways to mark the surface of the Aclar to create substrates to locate cells first at the light microscopy and then the electron microscopy level. All the methods enable the user to self‐design gridded Aclar pieces, according to the purpose of the experiments, and create a large number of substrates in a short time. Second, we confirmed that marked Aclar supports the normal growth and morphology of cells. Third, we validated the correlative light and electron microscopy procedure using Aclar. This validation was done for the high‐resolution analysis of endothelial cells using transmission electron microscopy and focused ion beam–scanning electron microscopy in combination with the use of fluorescence, phase contrast and/or bright field microscopy to map areas of interest at low resolution. The methods that we present are diverse, easy to implement and highly reproducible, and emphasize the versatility of Aclar as a cell growth substrate for diverse microscopic applications.     

High temperature AFM study of CAP 30/45 pen grade bitumen

Bitumen is a complex mixture of hydrocarbons for which microstructural understanding is incomplete. In an effort to detail this microstructure, a asphalt cement sample (CAP 30/45) was analysed by thermal phase detection atomic force microscopy. Phase contrast and topography images showed that sample morphology is highly dependent on temperature. The ‘bee structure’ changed considerably at temperatures between 50°C and 56°C. A decrease of the oscillation amplitude was observed upon heating and the ‘bees’ completely disappeared at temperatures above 57°C. When the temperature was decreased after melting at 170°C, the ‘bees’ began to nucleate gradually at temperatures of 57°C and its evolution with time was followed. Changes in morphology were compared to thermal analysis results and a model for the ‘bee’ structure was proposed.     

Design of an Automated Sorting System for Apples Based on Single Chip Microcomputer

The grading judgment for apples is related to a variety of factors including,size,shape,color,texture,and scars.Traditional manual sorting methods are time cons...     

Electrocatalytic oxidation of ethanol on Pt–Mo bimetallic electrodes in acid medium

Pt–Mo alloy electrocatalysts were prepared by an arc-melting furnace process to investigate the origin of their enhanced activity toward ethanol oxidation. Two Mo contents were chosen in zones of the binary phase diagram where they are supposed to form either a pure alloy mixture or a solid solution. Pt–Mo alloy catalysts were more active than Pt-alone. Gradual Mo dissolution at the electrode surface was observed after voltammetric and chronoamperometric measurements. The dissolved Mo contributed to the catalytic effect of the electrode as underpotentially deposited (upd) adatoms. This dissolution probably also leads to an increase in the electrode surface roughness. Low molybdenum content in the electrode material enhances the activity toward ethanol oxidation when compared to Pt-alone. Ethanol oxidation was also investigated by in situ infrared reflectance spectroscopy in order to determine the presence of adsorbed intermediates like CO species. Acetaldehyde, acetic acid and CO₂ were also found by spectroscopic experiments.     

Morphological effects of ceramide on DMPC/DHPC bicelles

Freeze fracture electron microscopy and dynamic light scattering were applied to characterize the morphological changes of DMPC/DHPC bicellar systems induced by the addition of ceramides. The results demonstrate a tendency of the DMPC/DHPC aggregates to evolve forming elongated or tubular structures with the increase of the temperature. At 20°C, low concentrations of ceramide promote the appearance of elongated structures with twisted zones. Higher concentrations of this lipid lead to the formation of liposomes along the elongated structures. The increase of the temperature to 40°C induces the growth of the structures containing low concentrations of ceramide forming branched aggregates. In samples with high amounts of ceramide, the increase of temperature causes phase separation and the formation of a mixed system composed by liposomes and multilamellar tubules. The morphological effects induced by ceramides in this new membrane model give new insights for the role played by this lipid in biological membranes.     

Tomography of insulating biological and geological materials using focused ion beam (FIB) sectioning and low-kV BSE imaging

Tomography in a focused ion beam (FIB) scanning electron microscope (SEM) is a powerful method for the characterization of three-dimensional micro- and nanostructures. Although this technique can be routinely applied to conducting materials, FIB–SEM tomography of many insulators, including biological, geological and ceramic samples, is often more difficult because of charging effects that disturb the serial sectioning using the ion beam or the imaging using the electron beam. Here, we show that automatic tomography of biological and geological samples can be achieved by serial sectioning with a focused ion beam and block-face imaging using low-kV backscattered electrons. In addition, a new ion milling geometry is used that reduces the effects of intensity gradients that are inherent in conventional geometry used for FIB–SEM tomography.     

Cryogenic EBSD on ice: preserving a stable surface in a low pressure SEM

Naturally deformed ice contains subgrains with characteristic geometries that have recently been identified in etched surfaces using high-resolution light microscopy (LM). The probable slip systems responsible for these subgrain boundary types can be determined using electron backscattered diffraction (EBSD), providing the etch features imaged with reflected LM can be retained during EBSD data acquisition in a scanning electron microscope (SEM). Retention of the etch features requires that the ice surface is stable. Depending on the pressure and temperature, sublimation of ice can occur. The equilibrium temperature for a low pressure SEM operating at 1 × 10(-6) hPa is about -112°C and operating at higher temperatures causes sublimation. Although charging of uncoated ice samples is reduced by sublimation, important information contained in the etch features are removed as the surface sublimes. We developed a method for collecting EBSD data on stable ice surfaces in a low pressure SEM. We found that operating at temperatures of <-112°C reduced sublimation so that the original etch surface features were retained. Charging, which occurred at low pressures (<1.5 × 10(-6) to 2.8 × 10(-5) hPa) was reduced by defocusing the beam. At very low pressures (<1.5 × 10(-6) hPa) the spatial resolution with a defocused beam at 10 kV was about 3 μm in the x-direction at -150°C and 0.5 μm at -120°C, because at higher temperature charging was less and only a small defocus was needed to compensate it. Angular resolution was better than 0.7° after orientation averaging. Excellent agreement was obtained between LM etch features and EBSD mapped microstructures. First results are shown, which indicate subgrain boundary types comprised of basal (tilt and twist) and nonbasal dislocations (tilt boundaries).     

Thymic stromal lymphopoietin: a cytokine that promotes the development of IgM+ B cells in vitro and signals via a novel mechanism

A novel cytokine from a thymic stromal cell line (thymic stromal lymphopoietin (TSLP)) promotes the development of B220+/IgM+ immature B cells when added to fetal liver cultures, long term bone marrow cultures, or bone marrow cells plated in semisolid medium. Because the activities of TSLP overlap with those of IL-7 in some in vitro assays, we compared the signaling mechanisms employed by TSLP and IL-7. Proliferation of a factor-dependent pre-B cell line (NAG8/7) in response to either TSLP or IL-7 was inhibited by anti-IL-7R alpha mAbs, suggesting that the functional TSLP receptor complex uses IL-7R alpha. In contrast, three different Abs to the common cytokine receptor gamma-chain had no effect on the response of these cells to TSLP, indicating that the functional TSLP receptor complex does not use the common cytokine receptor gamma-chain. Both cytokines induced activation of Stat5, but only IL-7 induced activation of the Janus family kinases Jak1 and Jak3. In fact, TSLP failed to activate any of the four known Janus family kinases, suggesting that Stat5 phosphorylation is mediated by a novel mechanism. Taken together, these data support the idea that TSLP can make unique contributions to B lymphopoiesis and indicate that it does so by mechanisms distinct from IL-7.