主板行情

本月芯片组新品并没有大量发布，不过nVIDIA收购ULI还是成为近期最令人瞩目的事件。ULI在嵌入式芯片组以厦南桥芯片方面有着强大的实力，而此番nVIDIA收购ULI必然对其实力增强很有帮助，更彻底压制了ATi，使其至少有足够的资本与VIA对抗。     

Functional properties of a protein product from Caryodendron orinocense (Barinas nut)

The functional properties of Caryodendron orinocense protein product were investigated and compared with those of soybean (Glycina maxima). The product protein content was 24.47 g/100 g (Nx6.25). Solubility increased at both sides of the isoelectric point (pH 4.0) and with increased NaCl concentration up to 0.5M. Compared with soybean flour (50% protein), the protein product exhibited higher water and oil absorption, but lower emulsifying activity, emulsion stability, foaming capacity, and foam stability, the last one increase at higher pH. Emulsifying activity, foaming capacity, and foam stability were ionic strength dependent. C. orinocense protein product increased its emulsifying activity steadily from 0.05M to 0.75M NaCl, while it remained almost constant for soybean flour. Foaming capacity increased drastically at pH 10. The minimum time and concentration to form a gel was 20% in 4 min and 10% in 8 min for the Caryodendron protein product and soybean flour, respectively. The bulk density was 0.5056+/-0.0041 g/mL.     

Circulating Monocyte Subsets and Transcatheter Aortic Valve Replacement

Transcatheter aortic valve replacement (TAVR), as an alternative to open heart surgery, has revolutionized the treatment of severe aortic valve stenosis (AVS), the most common valvular disorder in the elderly. AVS is now considered a form of atherosclerosis and, like the latter, partly of inflammatory origin. Patients with high-grade AVS have a highly disturbed blood flow associated with high levels of shear stress. The immediate reopening of the valve during TAVR leads to a sudden restoration of a normal blood flow hemodynamic. Despite its good prognosis for patients, TAVR remains associated with bleeding or thrombotic postprocedural complications, involving mechanisms that are still poorly understood. Many studies report the close link between blood coagulation and inflammation, termed thromboinflammation, including monocytes as a major actor. The TAVR procedure represents a unique opportunity to study the influence of shear stress on human monocytes, key mediators of inflammation and hemostasis processes. The purpose of this study was to conduct a review of the literature to provide a comprehensive overview of the impact of TAVR on monocyte phenotype and subset repartition and the association of these parameters with the clinical outcomes of patients with severe AVS who underwent TAVR.     

High‐efficiency microcrystalline silicon single‐junction solar cells

This short communication highlights our latest results towards high‐efficiency microcrystalline silicon single‐junction solar cells. By combining adequate cell design with high‐quality material, a new world record efficiency was achieved for single‐junction microcrystalline silicon solar cell, with a conversion efficiency of 10.69%, independently confirmed at ISE CalLab PV Cells. Such significant conversion efficiency could be achieved with only 1.8 µm of Si. Copyright © 2013 John Wiley & Sons, Ltd.     

Recent Advances in Mn-Rich Layered Materials for Sodium-Ion Batteries

Branded with low cost and a high degree of safety, with an ambitious aim of substituting lithium-ion batteries in many fields, sodium-ion batteries have received fervid attention in recent years after being dormant for decades. Layered materials are a major focus of study owing to the extensive experience already gained in lithium-ion batteries, and the pursuit of a Mn-rich composition is critical to reduce the cost while retaining the performance. This review provides a timely update of the recent progress of Mn-rich layered materials for sodium-ion batteries based on the understandings of the phase forming principles, structure transformation upon cycling and charge compensation mechanisms and discusses potential ambiguities in the pursuit of high-performance materials.     

A New View of Microcrystalline Silicon: The Role of Plasma Processing in Achieving a Dense and Stable Absorber Material for Photovoltaic Applications

To further lower production costs and increase conversion efficiency of thin‐film silicon solar modules, challenges are the deposition of high‐quality microcrystalline silicon (μc‐Si:H) at an increased rate and on textured substrates that guarantee efficient light trapping. A qualitative model that explains how plasma processes act on the properties of μc‐Si:H and on the related solar cell performance is presented, evidencing the growth of two different material phases. The first phase, which gives signature for bulk defect density, can be obtained at high quality over a wide range of plasma process parameters and dominates cell performance on flat substrates. The second phase, which consists of nanoporous 2D regions, typically appears when the material is grown on substrates with inappropriate roughness, and alters or even dominates the electrical performance of the device. The formation of this second material phase is shown to be highly sensitive to deposition conditions and substrate geometry, especially at high deposition rates. This porous material phase is more prone to the incorporation of contaminants present in the plasma during film deposition and is reported to lead to solar cells with instabilities with respect to humidity exposure and post‐deposition oxidation. It is demonstrated how defective zones influence can be mitigated by the choice of suitable plasma processes and silicon sub‐oxide doped layers, for reaching high efficiency stable thin film silicon solar cells.     

Heat-induced aggregation of whey proteins in the presence of κ-casein or sodium caseinate

Aggregates were formed by heating mixtures of whey protein isolate (WPI) and pure κ-casein or sodium caseinate at pH 7 and 0.1 M NaCl. The aggregates were characterized by static and dynamic light scattering and size exclusion chromatography. After extensive heat-treatment at 80 °C for 24 h, almost all whey proteins and κ-casein formed mixed aggregates, but a large proportion of the sodium caseinate did not aggregate. At a given WPI concentration the size of the aggregates decreased with increasing κ-casein or sodium caseinate concentration, but the overall self-similar structure of the aggregates was the same. The presence of κ-casein or caseinate therefore inhibited growth of the heat-induced whey protein aggregates. The results were discussed relative to the reported chaperone-like activity of casein molecules towards heat aggregation of globular proteins.     

Interactions of aqueous selenium (-II) and (IV) with metallic sulfide surfaces

The present study was initiated to determine the capacity of sulfide minerals (pyrite FeS2 and chalcopyrite CuFeS2) to delay the migration of inorganic selenium species in geological formations. Interactions between Se(IV) and Se(-II) and synthetic and natural sulfide minerals were investigated under anoxic conditions using the batch method. Significant sorption of selenium occurred under acidic conditions. Analysis of the solids after Se sorption using X-ray photoelectron spectroscopy (XPS) and X-ray absorption near edge structure (XANES) demonstrated the presence of reduced selenium species on the metallic sulfide surfaces, thus suggesting an oxido-reduction process coupled with sorption. Selenium reduction occurred concomitantly with the oxidation of pyritic sulfur, whereas metallic species (Fe, Cu) were not involved in the redox process. Formation of ferroselite (FeSe2) was postulated to take place on the synthetic solid while surface complexation or ionic exchange processes were more likely on the natural solids.     

The dynamics of aroma release during consumption of candies of different structures,and relationship with temporal perception

We investigated the role of both candy texture and eating technique (melting or chewing) on the dynamics of aroma release. One novelty of this type of analysis was the simultaneous application of instrumental and sensory analysis. Four candy textures were established based on their storage modulus at 1 Hz by varying the gelatine content between 0 and 15% w/w. The invivo release of three aroma compounds was monitored using Proton Transfer Reaction Mass Spectrometry and with a trained panel of testers. The gelatine content had no significant effect on the headspace/product partition and diffusion properties of the aroma compounds. The highest invivo release for all aroma compounds was obtained with the 2% gelatine sample. Our findings indicated that aroma release was determined by interaction between the product properties and oral behaviour. Relations between the dynamics of release and perception (method of Temporal Dominance of Sensations) have been established on temporal parameters.