Urinary cytology of transitional-cell carcinoma

The authors report on their experience about urinary cytology in 1991. They studied 100 patients with cytology and histology, carried by cystoscopy and cold-mapping biopsy, trying to have notice about cytological value and proficiency.     

Influence of vacuum skin packaging on color stability of beef longissimus lumborum compared with vacuum and high-oxygen modified atmosphere packaging

The objective of this study was to investigate how color stability of beef is affected by vacuum skin packaging (VSP) compared with vacuum packaging (VP) and high-oxygen modified atmosphere packaging (MAP; 80% O(2) and 20% CO(2)). Longissimus lumborum muscles were aged in vacuum for 7days and then cut into 2-cm-thick slices and repacked using VSP, VP and MAP for another 7days. Color stability was measured during the next 5days in air and samples for α-tocopherol and NADH analyses were obtained at the beginning and end of aerobic storage. Color stability, α-tocopherol and NADH of steaks were affected by packaging methods and storage time in air (P<0.05). Higher a* value was obtained in VSP on day 5 compared with VP. Steaks packed in VSP had better color stability than in VP and their color was similar to MAP at the end (day 5) of storage.     

Sustained release of IL-1Ra from biodegradable microspheres prolongs its IL-1-neutralizing effects

A sustained delivery system for interleukin-1 receptor antagonist (IL-1Ra) may have great therapeutic and industrial potential due to the cytokine activity as an IL-1 inhibitor. Here, we investigated the capability of biodegradable polymeric microspheres to sustain the release and prolong the therapeutic efficacy of IL-1Ra. IL-1Ra was encapsulated within rapidly degrading poly(lactic/glycolic acid) PLGA RG502H microspheres, which showed a desirable release profile of IL-1Ra in vitro. Pharmacokinetic study in mice revealed elevated serum levels of the recombinant IL-1Ra (rIL-1Ra) for up to 8 days following subcutaneous injection of IL-1Ra microspheres. In comparison, the serum levels of rIL-1Ra following subcutaneous or intravenous bolus injection of the soluble cytokine decreased very rapidly; within 48 h no recombinant cytokine was detected in mice sera. The sustained delivery of rIL-1Ra for over two weeks was efficient in inhibiting IL-1ß-stimulated induction of serum IL-6. These results suggest that the present therapeutic protocol of daily bolus injections of the IL-1Ra may be replaced by a weekly injection of IL-1Ra within PLGA RG502H microspheres.     

Variability and molecular typing of Streptococcus thermophilus strains displaying different proteolytic and acidifying properties

Proteolytic and acidifying properties of Streptococcus thermophilus strains isolated from yoghurt or cheeses were evaluated. Among 30 strains tested, 12 exhibited cell envelope-associated proteinase activity (PrtS⁺), three displayed a slight PrtS activity (PrtS^+/?) and 15 were PrtS^?, despite the presence of the corresponding gene (prtS) in eight of them. Sequencing of the prtS gene in four PrtS^? and one PrtS⁺ strains revealed that the absence of PrtS activity in the PrtS^? strain probably results from an alteration of the prtS regulation. The strains displaying the highest acidifying capacities were all PrtS⁺. All but one PrtS⁺ strains were phylogenetically close, as shown by the sequencing of their rDNA internal transcribed spacer (ITS) 16S-23S. More specifically, the high proteolytic and acidifying capacities are associated with the presence of a type II-ITS.     

Electrochemical oxidation of organics in water: Role of operative parameters in the absence and in the presence of NaCl

The electrochemical oxidation of organics in water was investigated theoretically and experimentally to determine the role of several operative parameters on the performances of the process in the presence and in the absence of sodium chloride. Theoretical considerations were used to design the experimental investigation and were confirmed by the results of the electrochemical oxidation of oxalic acid (OA) at boron doped diamond (BDD) or IrO₂-Ta₂O₅ (DSA-O₂) anodes in a continuous batch recirculation reaction system equipped with a parallel plate undivided electrochemical cell. Polarization curves and chronoamperometric measurements indicated that, in the presence of chlorides, the anodic oxidation of OA is partially replaced by an indirect oxidation process. This result was confirmed by electrolyses experiments that show that, in the presence of suitable amount of chlorides, oxidation of OA takes place mainly by a homogeneous process. Interestingly, a very different influence of the nature of the anodic material, the flow rate and the current density on the performances of the process arises in the absence and in the presence of chlorides so that optimization of the two processes requires very different operative conditions. In the absence of chlorides, high current efficiency (CE) is obtained at BDD when most part of the process is under charge transfer controlled kinetics, i.e. when low current densities and high flow rates are imposed. On the other hand, in the presence of NaCl, higher CE are generally obtained at DSA anode when high current densities and low flow rates are imposed, i.e. when a high concentration of chemical oxidants is obtained as a result of the chloride oxidation. The effect of other operative parameters such as the OA concentration and the pH were further investigated.     

A spread-sheet model for efficient production and scheduling of a manufacturing line/cell

In this paper we develop an efficient spread-sheet production planning/scheduling model for a resource-constraint production line or a manufacturing cell that produces several products but one at a time with significant changeover time and changeover cost. There are also management and physical constraints related to the operating hours, production capacity and amount of inventory allowed. The production line/cell supplies several products to customers who pull the products according to their own operating policy (working hours) that may be different from manufacture's operating hours. We also show several real-world applications and highlight the benefits and merits of the model.     

Electrocatalytic carboxylation of chloroacetonitrile at a silver cathode for the synthesis of cyanoacetic acid

The electrocatalytic carboxylation of chloroacetonitrile to cyanoacetic acid performed at silver cathodes was investigated both theoretically and experimentally. Silver exhibits powerful electrocatalytic activities towards the reduction of chloroacetonitrile. In CO₂-saturated CH₃CN, reduction of NCCH₂Cl occurs at potentials that are about 0.7 V more positive than those observed at glassy carbon and gives cyanoacetic acid in good yields. Theoretical considerations on the effect of operative parameters on the performances of the process were confirmed by electrocarboxylation experiments performed in undivided cells equipped with sacrificial anodes both in a bench-scale electrochemical batch reactor and in a continuous batch recirculation reaction system equipped with a parallel plate electrochemical cell. Selectivities and Faradic efficiencies higher than 80% were obtained by working under anhydrous conditions both under amperostatic and potentiostatic alimentation at proper values of either current density or applied potential.     

Microstructure and properties of cold consolidated amorphous ribbons from (NiCu)ZrTiAlSi alloys

Amorphous ribbons of compositions (Ni₅₆Cu₂)Zr₁₈Ti₁₃Al₆Si₅ and (Ni₃₆Cu₂₃)Zr₁₈Ti₁₄Al₅Si₄ were consolidated by high pressure torsion (HPT) at room temperature. In the HPT experiments a 6 GPa pressure and two turns were applied. Samples in the form of discs, 6–7 times thicker than the ribbons and about 10 mm in diameter were achieved. The minimal deformation for the homogenous consolidation was estimated to be in the range of 400%. XRD showed that the microstructure was dependent on the composition. The sample with high Cu content remained amorphous while the sample with low Cu content revealed some crystallization. DSC experiments allowed a comparison of the glass transition temperature T_g and crystallization process of the amorphous ribbon and HPT sample which were different. The glass transition temperature T_g of the amorphous HPT sample of (Ni₃₆Cu₂₃)Zr₁₈Ti₁₄Al₅Si₄ composition decreased. For both alloys the nanohardness and the elastic modules showed decrease for cold consolidated samples in comparison to the ribbons.