Wake and aerodynamics loads in multiple bodies—application to turbomachinery blade rows

Two-dimensional, unsteady flow around bodies of complex geometry (or multiple bodies) at high Reynolds number is simulated using the vortex method. This method is modified to take into account the sub-grid scale phenomena through a second order velocity structure function model adapted to the Lagrangian scheme. The dynamics of the body wake is computed using the convection-diffusion splitting algorithm; the convection process is carried out with a Lagrangian Adams-Bashforth time-marching scheme and the diffusion process is simulated using the random walk method. The pressure distribution is obtained using an integral equation derived from the pressure Poisson equation, which was first developed for a single body. Results for the numerical simulation around a linear cascade of airfoils are presented. As the flow is periodic in the y direction, the discrete vortex shedding need only be considered for a reference airfoil. The flow characteristics around the NACA 65-410 series airfoils are calculated and comparisons are made with results available in the literature.     

Thermomechanical behavior of Ti-Ni shape memory alloy films deposited by DC magnetron sputtering

In this study, thermomechanical properties of titanium-nickel (Ti-Ni) shape memory alloy (SMA) films are investigated in order to derive constitutive relations. Ti-Ni SMA films, deposited by DC magnetron sputtering under controlled film composition, are characterized by uniaxial tensile tests. At room temperature (R.T.), Ti-Ni films having Ti contents less than 50 at% exhibit superelastic behavior, and those having Ti contents greater than 50 at% exhibit shape memory behavior. However, the Ni—53.2 at% Ti film fractured at a tensile strain of 0.8% because of an increase in brittleness with increasing Ti content. At elevated temperatures, Ti-Ni films having Ti contents of 50.2 to 52.6 at% undergo phase change from martensite to austenite. The Young's modulus of the Ti-Ni films depends on temperature at each phase, regardless of film composition. Film composition does, however, affect the measured material constants b_A, b_M, c_A, and c_M. Stress-strain curves calculated from the constructed constitutive equation closely agree with those obtained from tensile tests, for both the martensite and austenite phases. The constitutive equations are expected to find great utility in the design of Ti-Ni film-actuated microelectromechanical systems (MEMS).     

Lingual Epithelial Stem Cells and Organoid Culture of Them

As tongue cancer is one of the major malignant cancers in the world, understanding the mechanism of maintenance of lingual epithelial tissue, which is known to be the origin of tongue cancer, is unquestionably important. However, the actual stem cells that are responsible for the long-term maintenance of the lingual epithelium have not been identified. Moreover, a simple and convenient culture method for lingual epithelial stem cells has not yet been established. Recently, we have shown that Bmi1-positive cells, residing at the second or third layer of the epithelial cell layer at the base of the interpapillary pit (IPP), were slow-cycling and could supply keratinized epithelial cells for over one year, indicating that Bmi1-positive cells are long-term lingual epithelial stem cells. In addition, we have developed a novel lingual epithelium organoid culture system using a three-dimensional matrix and growth factors. Here, we discuss current progress in the identification of lingual stem cells and future applications of the lingual culture system for studying the regulatory mechanisms of the lingual epithelium and for regenerative medicine.     

HR-TEM observation of laser pressure weld of galvannealed steel and pure aluminium

Laser pressure welding was conducted by changing the laser power and the roller pressure in the previous experiment. It was revealed that dissimilar metal welding of galvannealed steel and pure aluminium was feasible in a wide range of welding conditions. When the roller pressure was more than 1.96 kN at the laser powers equal to or less than 1400 W, the joint strengths were so high that the specimens in the tensile shear and the peel tests fractured in the A1050 parent metal.

In order to know the reason for such high strengths of joints with thick compound layers and the joining mechanism, the compound layer was observed by HR-transmission electron microscopy (TEM). The TEM observation results revealed that the main phase in the compound layer was the solid solution of Al + Zn. Moreover, the intermetallic compound was identified as FeAl, Fe₂Al₅, Fe₄Al₁₃ and Fe₂Al₅Zn_0.4 phase by electron diffraction. The Fe₃Zn₁₀ (Γ phase) of Fe–Zn intermetallic compound was confirmed on a Fe base material. It is guessed that the joining areas were heated at a range of 782°C more than 665°C, a melting point of Al, by laser irradiation because the δ_lk phase aspect was not confirmed. Because the surfaces of A1050 and Zn plated layer were melted thinly, the layer was over 10 μm thicker. The reason for the production of high-strength joints with a relatively thick intermetallic compound layer was attributed to the formation of (Al + Zn) phase with finely dispersed intermetallic compounds.     

Laser pressure welding of aluminium and galvannealed steel

Dissimilar metal joints of galvannealed steel and commercially available pure aluminium (A1050) sheets were produced by changing the laser power and the roller pressure by the laser pressure welding method. In this method, the YAG laser beam was irradiated into a flare groove made by these dissimilar metal sheets. In addition, the laser beam was scanned at various frequencies and patterns through the fθ lens using two-dimensional scanning mirrors. Then the sheets were pressed by the pressure rolls to be joined. The compound layers in the weld interface were observed by optical microscope, and the layer thicknesses were measured. The thicknesses were in the range of 7–20 μm. The mechanical properties of welded joints were evaluated by the tensile shear test and the peel test. In the tensile shear test, the strengths of the joints produced under the most welding conditions were so high that the fracture occurred through the base aluminium sheet. In the peel test of the specimens subjected to the laser beam of 1200–1400 W power under the roller pressure of 2.94 kN, the specimen fracture took place in the base aluminium sheet. Even if the compound layer was thick, high joint strength was obtained. In order to know the reason for such high strength of joints with thick compound layers and the joining mechanism, the compound layer was observed by the HR-TEM. The TEM observation results revealed that the main phase in the compound layer was the solid solution of Al + Zn. Moreover, the intermetallic compound was identified as FeAl, Fe₂Al₅, Fe₄Al₁₃, and Fe₂Al₅Zn_0.4 phase by electron diffraction. The Fe₃Zn₁₀ (Γ phase) of Fe–Zn intermetallic compound was confirmed on a Fe base material. It is assumed that the joining areas were heated in a range of 782°C more than 665°C, a melting point of Al, by laser irradiation because the δ_lk phase aspect was not confirmed. Because the surfaces of A1050 and Zn plated layer were melted thinly, the layer was over 10 μm thicker. The reason for the production of high strength joints with the relatively thick intermetallic compound layer was attributed to the formation of (Al + Zn) phase with finely dispersed intermetallic compounds.     

Collagen and elastin synthesis by desmoid tumor in vitro

In order to characterize human desmoid tumors in vitro, the production of collagen and elastin and the expression of collagen types alpha1(I), alpha1(III) and transforming growth factor (TGF)-beta1 mRNA were investigated in six desmoid tumors; five derived from familial adenomatous polyposis patients and one from a sporadic case. The proportion of collagen production to total protein production was determined by 3H-imino acid incorporation, an indicator of collagen synthesis, using high-performance liquid chromatography (HPLC). The proportion of collagen production to total protein production was much higher in all six desmoid tumors compared with human skin fibroblasts (HSF). Quantitatively, the rate of elastin synthesis in desmoid tumor cells monitored by valine-proline peptide was also significantly higher than in HSF. Pro-alpha1(I) collagen mRNA was highly expressed in both desmoid tumors and HSF at approximately the same level, whereas pro-alpha1(III) collagen mRNA was more abundant in some of the desmoid tumors than the normal skin fibroblastic cell lines. Tumor growth factor-beta1 mRNA, which is believed to stimulate collagen synthesis, was expressed in both desmoid tumors and HSF to the same extent. These results demonstrate the increased formation of collagen and elastin in desmoid tumors in vitro and suggest that the increased synthesis of elastin rather than of collagen and TGF-beta1 may be involved in increased fibrogenesis by desmoid tumors.     

Integration of GaAs m.e.s.f.e.t.s and Gunn elements in a 4 bit-gate device

A GaAs m.e.s.f.e.t. and a Schottky electrode-triggered Gunn element have been integrated into a single device which operated as a negative logic inhibitor. A monolithic device of four such inhibitors, connected in cascade, was operated in a stable manner, with a signal delay per gate as small as 40 ps.     

Transferred-electron negative-resistance amplifier

It has experimentally been shown that the travelling domain oscillations in an n type GaAs bulk element can be suppressed by applying externally a large microwave-signal electric field. A computer calculation indicates a possibility of amplifying the signal when the element mounted in a stripline is subject to such a relatively large microwave signal.