In-air epitaxy of nanostructures (Aerotaxy) has recently emerged as a viable route for fast, large-scale production. In this study, we use small-angle X-ray scattering to perform direct in-flight characterizations of the first step of this process, i.e., the engineered formation of Au and Pt aerosol nanoparticles by spark generation in a flow of N2 gas. This represents a particular challenge for characterization because the particle density can be extremely low in controlled production. The particles produced are examined during production at operational pressures close to atmospheric conditions and exhibit a lognormal size distribution ranging from 5–100 nm. The Au and Pt particle production and detection are compared. We observe and characterize the nanoparticles at different stages of synthesis and extract the corresponding dominant physical properties, including the average particle diameter and sphericity, as influenced by particle sintering and the presence of aggregates. We observe highly sorted and sintered spherical Au nanoparticles at ultra-dilute concentrations (< 5 × 105 particles/cm3) corresponding to a volume fraction below 3 × 10–10, which is orders of magnitude below that of previously measured aerosols. We independently confirm an average particle radius of 25 nm via Guinier and Kratky plot analysis. Our study indicates that with high-intensity synchrotron beams and careful consideration of background removal, size and shape information can be obtained for extremely low particle concentrations with industrially relevant narrow size distributions.
An intracellular endopeptidase was purified from cell-free extracts of Lactobacillus delbrueckii subsp. bulgaricus B14 by anion exchange chromatography on DEAE-Sepharose, hydroxyapatite chromatography, second anion exchange chromatography on Mono-Q, and metal-chelating affinity chromatography. The endopeptidase was a monomer with a molecular mass of approximately 70 kDa determined by SDS-PAGE and gel filtration. Various oligopeptides (e.g. Met-enkephalin, bradykinin) were hydrolysed by the endopeptidase. Exopeptidase activity and cleavage of dipeptides or tripeptides was not observed. The KM value for the cleavage of Metenkephalin was 1.2 mM. Temperature and pH optima were 47 °C and pH 7.7, respectively. The endopeptidase was inhibited by the classical agents for metal-dependent (EDTA) and serine (DFP) enzymes. Activity was increased by Co2+ and Mg2+, no effect was observed with Ca2+. After inhibition with EDTA, enzyme activity could be restored fully by Co2+. Activity was inhibited by Zn2+, Mn2+, Fe2+, Cu2+, Cd2+ and Hg2+. The N-terminal sequence of the endopeptidase was determined as: H2N-Val-Arg-Gly-Gly-Ser-Gly-Asp-Thr-Thr-Val-0H. 相似文献
Mastocytosis is characterized by the pathological accumulation of mast cells (MC) in various organs. In these patients, MC may degranulate and thereby contribute to clinical symptoms, especially when a concomitant allergy is present. However, MC activation can not only be induced by high-affinity receptors for IgE, but also by anaphylatoxins, neuropeptides, IgG immune complexes, complement-components, drugs, products of bacteria or parasites, as well as physical factors such as heat, cold, vibration, stress, sun, or physical effort. Symptoms due to mediators released by activated MC may develop in adults suffering from systemic mastocytosis, but also evolve in children who usually have cutaneous mastocytosis (CM). Clinically, CM is otherwise characterized by typical brown, maculopapular skin lesions or mastocytoma associated with a positive Darier’s sign. Pruritus and flushing are common and blistering may also be recorded, especially in diffuse CM (DCM). Pediatric patients with mastocytosis may also have gastrointestinal, respiratory, and neurologic complaints. Although anaphylaxis is not a typical finding, pediatric patients with massive skin involvement and high tryptase levels have a relatively high risk to develop anaphylaxis. This paper reviews MC mediator-related symptoms and anaphylaxis in children with mastocytosis, with special emphasis on risk factors, triggers, and management. 相似文献
Metallurgical and Materials Transactions A - The effect of 0.03 and 0.08 at. pct Fe additions on the formation of secondary phases in an Al–1.1Mg–0.5Cu–0.3Si at. pct alloy was... 相似文献
Numerical simulations are used to estimate the dynamic behavior of new concepts of forming presses as well as to improve the
dynamic properties of existing machines. These simulations are to be parametrized with appropriate values in order to yield
most accurate results. In many cases neither the way of building up the simulation model for the specific problem nor an appropriate
method for gathering the needed date are given in advance. Regarding these facts this paper intends both to characterize the
way of building up complex simulation models by using basic simulation modules and to describe methods for the identification
of the needed parameters that work even under conditions that hitherto made parameter identifications impossible or at least
very time-consuming. In this context recent developments in simulating press dynamics will also be characterized as new modal
analysis methods that are not yet established in the field of forming technique.
The research activities were financed by the European Research Association for Sheet Metal Working. 相似文献
This paper presents an empirical study of control logic specifications used to document industrial control logic code in manufacturing applications. More than one hundred input/output related property specifications from ten different reusable function blocks were investigated. The main purpose of the study was to provide understanding of how the specifications are expressed by industrial practitioners, in order to develop new tools and methods for specifying control logic software, as well as for evaluating existing ones. In this paper, the studied specifications are used to evaluate linear temporal logic in general and the specification language ST-LTL, tailored for functions blocks, in particular. The study shows that most specifications are expressed as implications, that should always be fulfilled, between input and output conditions. Many of these implications are complex since the input and output conditions may be mixed and involve sequences, timer issues and non-boolean variables. Using ST-LTL it was possible to represent all implications of this study. The few non-implication specifications could be specified in ST-LTL as well after being altered to suit the specification language. The paper demonstrates some advantages of ST-LTL compared to standard linear temporal logic and discusses possible improvements such as support for automatic rewrite of complex specifications. 相似文献
A single-stage “wet impactor” is presented, where the impaction occurs on a regenerated water surface. The developed impactor is equipped with an impaction liquid support plate of etched glass and a drain spout providing a continuous liquid flow covering the impaction area. Subsequent transport of the impaction liquid makes an on-line determination possible. With multiple nozzles (74 holes, 0.3 mm i.d.) and an air flow of 101/min the cut-off was determined to 0.41 ± 0.02 μm. The impactor was also investigated for its particle loss. The cut-off function, regarding the consequences of letting impaction occur in a liquid film is discussed and compared to conventional impactors. The analysis technique was tested in an ambient air measurement study with an ion chromatograph attached to the sampling system. 相似文献
The central foundations of successful dental treatment consist of a trustful patient-dentist relationship, the professional and psychosocial expertise of the team treating the patient, and consideration of ethical aspects both during the therapeutic decision-making process and during the subsequent execution of therapy. This is especially true of the dental treatment of (mostly elder) persons with dementia, calling for an in-depth assessment of the various normative implications.
Arguments
In geriatric dentistry in particular, situational dilemmas regarding treatment often arise from specific constellations (e.?g. greatly reduced potential for dental therapy, lack of ability regarding oral hygiene and lack of individual patient responsibility) combined with an acute need for treatment and the necessary involvement of third parties. These dilemmas frequently place additional professional and normative demands on the dentist. The current contribution discusses this specific situation, first by way of theoretical discourse and subsequently with a case-related approach on the basis of two case histories.
Conclusion
It becomes clear here that classic state-of-the-art therapies are replaced by “compromise treatment” in many cases in geriatric dentistry. Such treatment follows divergent diagnostic and therapeutic rules, poses changed requirements in terms of communication and presents specific ethical challenges and pitfalls.