Power sector development in India with CO2 emission targets: Effects of regional grid integration and the role of clean technologies

The power sector in India at present comprises of five separate regional electricity grids having practically no integrated operation in between them. This study analyses the utility planning, environmental and economical effects of integrated power sector development at the national level in which the regional electric grids are developed and operated as one integrated system. It also examines the effects of selected CO₂ emission reduction targets in the power sector and the role of renewable power generation technologies in India. The study shows that the integrated development and operation of the power system at the national level would reduce the total cost including fuel cost by 4912 million $, total capacity addition by 2784 MW, while the emission of CO₂, SO₂ and NO_x would be reduced by 231.6 (1.9%), 0.8 (0.9%), 0.4 (1.2%) million tons, respectively, during the planning horizon. Furthermore, the study shows that the expected unserved energy, one of the indices of generation system reliability, would decrease to 26 GWh under integrated national power system from 5158 GWh. As different levels of CO₂ emission reduction targets were imposed, there is a switching of generation from conventional coal plants to gas fired plants, clean coal technologies and nuclear based plants. As a result the capacity expansion cost has increased. It was found that wind power plant is most attractive and economical in the Indian perspective among the renewable options considered (Solar, wind and biomass). Copyright © 2003 John Wiley & Sons, Ltd.     

Guest Editors' Introduction: Overview of Sensor Networks

Wireless sensor networks could advance many scientific pursuits while providing a vehicle for enhancing various forms of productivity, including manufacturing, agriculture, construction, and transportation.     

Acidogenic fermentation of blended food‐waste in combination with primary sludge for the production of volatile fatty acids

The performance of a laboratory‐scale anaerobic acidogenic fermenter fed with a mixture of blended kitchen food‐waste and primary sludge from a sewage treatment plant was investigated for the production of volatile fatty acids (VFA). The operating variables for acidogenic fermentation were kitchen food‐waste content (10 and 25 wt %), hydraulic retention time (HRT: 1, 3 and 5 days), temperature (ambient: 18 ± 2 °C, and mesophilic: 35 ± 2 °C) and pH (varied from 5.2 to 6.7). The experimental results indicated that effluent VFA concentrations and VFA production rates were higher at ambient temperature than at mesophilic conditions. The net amount of VFA with 10 wt % food‐waste increased up to 920 mg dm^?3 with an increase of HRT, but contrasting results (a decrease of 2610 mg dm^?3) were found due to the conversion of VFA into biogas in the case of 25 wt % food‐waste, which increased significantly at HRT of 3–5 days. In terms of biogas composition (CO₂ and CH₄), the organic matter was converted into CO₂ through the oxidative pathway by facultative species at low temperature while mesophilic temperature and optimum pH (6.3–7.8) played a pivotal role in increasing rate of conversion of VFA into biogas by methanogenesis. Rates of VFA production and their conversion are dependent on the food‐waste content in the mixture. Yet, the higher concentration of food‐waste (25% compared with 10%) did not produce VFA proportionally due to the increased rate of conversion of VFA into gaseous products. The maximum VFA production rate (0.318 g VFA_produced g^?1 VS_fed day^?1) was achieved in the 10 wt % food‐waste at ambient temperature and at a 5‐day HRT. Copyright © 2005 Society of Chemical Industry     

Vinyl acetate monomer—a pilot plant study

The kinetics of the reaction of acetic acid and acetylene over zinc acetate-activated carbon catalyst was investigated over a wide range of process variables in a pilot reactor. Although various catalytic reaction mechanisms were postulated, the rate of reaction was most satisfactorily correlated by a mechanism of surface reaction between charged adsorbed acetic acid and acetylene, which assumes that the rate controlling step was the irreversible charged adsorption of acetylene and acetic acid.     

Clinical investigation of traumatic injuries of permanent incisors in Izmir, Turkey

470 injured teeth of 370 patients who consulted the Dental Clinic of Ege University, Izmir, Turkey for examination or treatment between 1981-1993 were evaluated. Information concerning sex, age of patients at the time of injury, cause of trauma, number of injured teeth, type of tooth and type of trauma were recorded. More boys suffered traumatic injuries (64.8%) than girls (35.2%). Patients aged 11-15 years old exhibited the highest number of injuries (34.4%) followed by the 6-10 years old group (24.5%). Most injuries involved one tooth (60%) and maxillary central incisors were the most often affected teeth (66.2%). The leading cause of injury was undefined falls (45.1%). At the initial examination, cases seen after a long posttraumatic period showed more complications than those presented within a short time period. Educational programs about the importance of dental trauma, the benefits of immediate attendance and conservation of avulsed and fractured teeth would be very helpful for patients. Additionally improving the knowledge of the dental practitioner about trauma would be another important point in solving the problem.     

Further studies of the mixed acetals of nucleosides

We reported in 1988 on a new nucleoside modification reaction: the exocyclic amino groups of (d)adenosine and (d)cytidine react rapidly at ambient temperature with acetaldehyde and alcohols to give stable mixed acetals (N-ethylethoxy-acetal). NH2 + O = CH(CH3) + ROH-->NH-CH(CH3)-O-R + H2O. Here we report in detail on the occurrence of this reaction in very dilute aqueous solution (ie under biological conditions), on its mechanism and kinetics, on the mixed acetal formation with other aldehydes and other nucleic acid components, and on the question of whether these adducts are mutagenic.     

Integrating statistical and nonstatistical audit evidence using belief functions: A case of variable sampling

The main purpose of this article is to show how one can integrate statistical and nonstatistical items of evidence in the belief function framework. First, we use the properties of consonant belief functions to define the belief that the true mean of a variable lies in a given interval when a statistical test is performed for the variable. Second, we use the above definition to determine the sample size for a statistical test when a desired level of belief is needed from the sample. Third, we determine the level of belief that the true mean lies in a given interval when a statistical test yields certain values for the sample mean and the standard deviation of the mean for the variable. Finally, we use the auditing situation to illustrate the process of integrating statistical and nonstatistical items evidence. © 1994 John Wiley & Sons, Inc.     

Controlling bacterial contamination of an enteral formula through the use of a unique closed system: contamination, enteral formulas, closed system

Contamination of enteral diets may play an essential role in formula tolerance and safety for patients. Contaminated enteral formula commonly support microbiological growth. Commercially sterile liquid formulas received from the manufacturer are required by the Food & Drug Administration (FDA) to be shelf-stable and free from enteric pathogens. This study examined the use of large volume, closed system containers in a typical nursing home. Large volume (1500 mL) containers with unique pierceable caps and piercing spikes were studied to determine their ability to reduce the incidence of microbiological contamination due to their design and ability to decrease handling requirements. This study took place in a room of a typical nursing home. In this clinical setting, 211 containers and administration spike sets were evaluated following a 36-h hangtime. Contamination was virtually nondetectable. Nursing staff in a clinical facility can effectively utilize a large volume, prefilled, ready-to-use feeding system to achieve delivery of noncontaminated product for up to 36 h hangtime.