Optimization of metal-based multilayers for transparent heat mirrors

Multilayer calculations by conventional matrix methods for dielectricum/noble metal/dielectricum systems on glass have been performed. The aim has been to maximize the integrated parameters for solar transmission, T_sol, and transmission of visible light, T_eye We have found that Ag is superior for maximizing the transmittance over the narrow visible wavelength range owing to the low internal absorptance. When solar energy transmission is considered multilayers based on Au are the best choice for metal film thicknesses above 15 nm. For thinner films, Ag is still to be preferred.     

The effect of random vaccine response on the vaccination coverage required to prevent epidemics

The response people have to vaccination varies because their immune systems differ and vaccine failures occur. Here we consider the effect that a random response, independent for each vaccinee, has on the vaccination coverage required to prevent epidemics in a large community. For a community of uniformly mixing individuals an explicit expression is found for the critical vaccination coverage (CVC) and the effect of the vaccine response is determined entirely by the mean E(AB), where A and B, respectively, reflect the infectivity and susceptibility of a vaccinated individual. This result shows that the usual concept of vaccine efficacy, which focuses on the amount of protection the vaccine provides the vaccinee against infection, is not adequate to describe the requirements for preventing epidemics when vaccination affect infectivity. The estimation of E(AB) poses a problem because A and B refer to the vaccine response of the same individual. Similar results are found when there are different types of individual, but now the mean E(AB) may differ between types. However, for a community made up of households it is shown that the CVC also depends on other characteristics of the vaccine response distribution. In practice this means that estimating a single measure of vaccine effectiveness is generally not enough to determine the CVC. For a specific community of households it is found that the vaccination coverage required to prevent epidemics decreases as the variation in the vaccine response increases.     

Optical acceptance function of modified compound parabolic concentrators with linear corrugated reflectors

For reflective cylindrical concentrators the acceptance function, as determined in the meridian plane, remains constant for more oblique planes of incidence. However, if the reflective surface has a linear corrugated structure, it is possible to increase the acceptance in the meridian plane at the expense of reduced acceptance at a more oblique incidence. A ray-tracing study has been performed on the optical properties of troughlike compound parabolic concentrators (CPC's) with linear corrugated reflectors. Calculations of angular acceptance for a modified CPC with concentration C = x is presented. A possible application of this new concentrator is as a secondary concentrator for tracking parabolic troughs.     

Efficient Nd:YAG Laser Frequency Doubling with Periodically Poled KTP

Periodically poled flux-grown KTiOPO(4) was used for efficient extracavity 1064-nm Nd:YAG laser frequency doubling. A conversion efficiency exceeding 65% was obtained in Q-switched operation, and 1.34 W of average frequency-doubled power was generated with 2.2 W of mode-locked laser output. The conversion efficiency is approximately two times higher for periodically poled KTP than for conventional type II phase-matched KTP. The measurements indicate that periodically poled KTP is less susceptible to optical damage than type II KTP.     

Obtaining mode mixity for a bimaterial interface crack using the virtual crack closure technique

We review, unify and extend work pertaining to evaluating mode mixity of interfacial fracture utilizing the virtual crack closure technique (VCCT). From the VCCT, components of the strain energy release rate (SERR) are obtained using the forces and displacements near the crack tip corresponding to the opening and sliding contributions. Unfortunately, these components depend on the crack extension size, Δ, used in the VCCT. It follows that a mode mixity based upon these components also will depend on the crack extension size. However, the components of the strain energy release rate can be used for determining the complex stress intensity factors (SIFs) and the associated mode mixity. In this study, we show that several—seemingly different—suggested methods presented in the literature used to obtain mode mixity based on the stress intensity factors are indeed identical. We also present an alternative, simpler quadratic equation to this end. Moreover, a Δ-independent strain energy release based mode mixity can be defined by introducing a “normalizing length parameter.” We show that when the reference length (used for the SIF-based mode mixity) and the normalizing length (used for Δ-independent SERR-based mode mixity) are equal, the two mode mixities are only shifted by a phase angle, depending on the bimaterial parameter ε.     

MICROFILTRATION of CHICKEN PROCESS WATERS FOR REUSE: PLANT STUDIES and PROJECTED OPERATING COSTS1

Commercial scale ceramic microfilters were used in plant tests to determine flux rate and operating parameters for waters from a poultry scalder, a poultry chiller, and brine from a delicatessen products chiller, under commercial conditions. Filtration produced clear permeate from all waters. Microorganism counts were essentially reduced to zero in scalder and chiller water permeates, with BOD reduced by about 70% in scalder water permeate and about 60% in chiller water permeate. Flux rates were in the range of 224-204 L/m²h for scalder water at 54°C and 114-81 L/m²h for chiller water at ambient temperature. Test results were used to project nonlabor operating savings and/or costs resulting from the use of microfiltration to recondition and reuse bath overflow. For a processing rate of 140 birds/min and bath size of 37,850 L (10,000 gal), an annual savings of $21,000-$26,000 were estimated for scalder water filtration, while annual costs of $65,000-$84,000 were estimated for chiller water filtration. For a deli brine bath size of 1,170 L (300 gal), annual costs of about $700 were estimated. Retentate heating and electrical usage associated with centrifugal filter pumps were projected as predominant cost factors. Besides costs, other factors such as nonchemical control of microbial growth, water savings, and reduced discharge levels may also be important reasons for considering microfiltration.     

A single-photon counter for long-haul telecom

Quite a few groups have turned their attention to using commercially available InGaAs/InP APDs, originally developed for optical communication applications, as SPADs for photon counting at 1300 nm and 1550 nm. This research has turned out to be quite fruitful, and there are many applications emerging in optical metrology (optical time-domain reflectometry) in eye-safe range finding and in future quantum technologies, where databits are encoded on individual photons. This article describes the status of these commercially available InGaAs/InP APDs used as single-photon counters in the telecom wavelength region of 1550 nm     

On the effects of the packet size distribution on the packet loss process

Real-time multimedia applications have to use forward error correction (FEC) anderror concealment techniques to cope with losses in today’s best-effort Internet. The efficiency of these solutions is known however to depend on the correlation between losses in the media stream. In this paper we investigate how the packet size distribution affects the packet loss process, that is, the distribution of the number of lost packets in a block, the related FEC performance and the average loss run length. We present mathematical models for the loss process of the MMPP+M/D/1/K and the MMPP+M/M/1/K queues; we validate the models via simulations, and compare the results to simulation results with an MPEG-4 coded video trace. We conclude that the deterministic packet size distribution (PSD) not only results in lower stationary loss probability than the exponential one, but also gives a less correlated loss process, both at a particular average link load and at a particular stationary loss probability as seen by the media stream.Our results show that for applications that can only measure the packet loss probability, the effects of the PSD on FEC performance are higher in access networks, where a single multimedia stream might affect the multiplexing behavior. Our results show that the effects of the PSD on FEC performance are higher in access networks, where a single multimedia stream might affect the multiplexing behavior and thus can improve the queuing performance by decreasing the variance of its PSD.     

用低反射率光栅阵列实现智能复合电力电缆温度监测

针对现有的电缆温度监测方法主要存在无法检测电缆内部温度和测温时易受到应力影响等缺点。针对此本文研究采用低反射率光栅(wFBG)阵列智能复合电力电缆温度监测技术,用于实时监测电缆内部及外部的温度分布情况。通过免应力光栅阵列,解决了复合电缆和光缆的过程中因光纤受力而影响光栅波长准确测量从而造成对温度的影响问题。系统通过检测wFBG波长漂移得到温度信息从而实现高灵敏度高空间分辨率的智能电缆的分布式温度在线监测。搭建了基于wFBG阵列的复合电力电缆实验系统,结果表明,该系统可以实现对电缆内部及外部温度的高精度、高空间分辨率分布式测量,电缆沿线空间分辨率达到10 cm,测温精度达到0.1℃。该低反射率光栅阵列智能复合电力电缆温度监测系统可以满足智能电网运行的实际需要。