Experimental Evidence for Seed Metabolic Allometry in Barrel Medic (Medicago truncatula Gaertn.)

Seed size is often considered to be an important trait for seed quality, i.e., vigour and germination performance. It is believed that seed size reflects the quantity of reserve material and thus the C and N sources available for post-germinative processes. However, mechanisms linking seed size and quality are poorly documented. In particular, specific metabolic changes when seed size varies are not well-known. To gain insight into this aspect, we examined seed size and composition across different accessions of barrel medic (Medicago truncatula Gaertn.) from the genetic core collection. We conducted multi-elemental analyses and isotope measurements, as well as exact mass GC–MS metabolomics. There was a systematic increase in N content (+0.17% N mg⁻¹) and a decrease in H content (–0.14% H mg⁻¹) with seed size, reflecting lower lipid and higher S-poor protein quantity. There was also a decrease in ²H natural abundance (δ²H), due to the lower prevalence of ²H-enriched lipid hydrogen atoms that underwent isotopic exchange with water during seed development. Metabolomics showed that seed size correlates with free amino acid and hexoses content, and anticorrelates with amino acid degradation products, disaccharides, malic acid and free fatty acids. All accessions followed the same trend, with insignificant differences in metabolic properties between them. Our results show that there is no general, proportional increase in metabolite pools with seed size. Seed size appears to be determined by metabolic balance (between sugar and amino acid degradation vs. utilisation for storage), which is in turn likely determined by phloem source metabolite delivery during seed development.     

Ultra Low Background Cryogenic Test Facility for Far-Infrared Radiation Detectors

The next generation of far infrared radiation detectors is aimed to reach photon noise limited performance in space based observatories such as SPICA and BLISS. These detectors operate at loading powers of the astronomical signal of a few Attowatt (10^?18 W) or less, corresponding to a sensitivity expressed in noise equivalent power as low as $\mathrm{NEP} = 2\times10^{-20}\ \mbox{W}/\sqrt{\mathrm{Hz}}$ . We have developed a cryogenic test setup for microwave Kinetic Inductance Detectors (MKIDs) that aims to reach these ultra-low background levels. Stray light is stopped by using a box in a box design with a sample holder inside another closed box. Microwave signals for the MKID readout enters the outer box through custom made coax cable filters. The stray light loading per pixel is estimated to be less than 60×10^?18 W during nominal operation, a number limited by the intrinsic sensitivity of the MKIDs used to validate the system.     

Identification of ritual blood in African artifacts using TOF-SIMS and synchrotron radiation microspectroscopies

A new protocol is implemented to demonstrate the presence of blood in the patina of African art objects from Mali. Divided into three steps, the protocol first consists in demonstrating the presence of proteins and localizing them in the sample's cross sections using time-of-flight secondary ion mass spectrometry (TOF-SIMS) and synchrotron-based infrared microspectrometry (microFT-IR). In a second time, TOF-SIMS is used to investigate heme, which is a blood marker. If heme is missing, which could mean that it is too degraded to be detected, X-ray microfluorescence (microXRF) and X-ray absorption near-edge microspectroscopy (microXANES) are used to prove the presence of iron in the protein area and to get a fingerprint of its chemical environment. This permits us thus to demonstrate that iron is indeed linked with proteins and not with mineral phases of the sample. Coupled with the ritual context of the objects, this constitutes a proof of the use of blood. Thanks to this protocol, which has the major advantage of avoiding false positive results, the presence of blood has been demonstrated in seven out of the eight studied samples.     

Evaluation of uncertainties in sewer condition assessment

Closed Circuit Television Inspection is used since decades as industry standard for sewer system inspection and structural performance evaluation. In current practice, inspection data are helpful to support asset management decisions. However, the quality and uncertainty of sewer condition assessment is rarely questioned. This article presents a methodology to determine the probability to underestimate, overestimate or accurately estimate the real condition of a pipe using visual inspection. The approach is based on the analysis of double inspections of the same sewer pipes and has been tested using the extensive data-set of the city of Braunschweig in Germany. Results indicate that the probability to inspect correctly a pipe in poor condition is close to 80%. The probability to overestimate the condition of a pipe in bad condition (false negative) is 20% whereas the probability to underestimate the condition of a pipe in good condition (false positive) is 15%. Finally, sewer condition evaluation can be used to assess the general condition of the network with an excellent accuracy probably because the respective effects of false positive and false negative are buffered.     

Relation between the critical state friction angle of sands and low vertical stresses in the direct shear test

In this study, the critical state friction angle in a direct shear box was tested at vertical effective stresses between 4?kPa and 150?kPa for seven sands of different origins. The results show a stress dependency on the angle of friction at low vertical stresses, and that the critical state friction angle decreases with increase in the vertical effective stress. The largest drop occurs for vertical effective stresses between 4?kPa and 50?kPa and varies between 4° and 10° depending mostly on the shape of the sand particles and the difference in the extreme void ratios.     

Indoor boundary layer chemistry modeling

Ozone (O₃) chemistry is thought to dominate the oxidation of indoor surfaces. We consider the hypothesis that reactions taking place within indoor boundary layers result in greater than anticipated hydroxyl radical (OH) deposition rates. We develop models that account for boundary layer mass‐transfer phenomena, O₃‐terpene chemistry and OH formation, removal, and deposition; we solve these analytically and by applying numerical methods. For an O₃‐limonene system, we find that OH flux to a surface with an O₃ reaction probability of 10^?8 is 4.3 × 10^?5 molec/(cm² s) which is about 10 times greater than predicted by a traditional boundary layer theory. At very low air exchange rates the OH surface flux can be as much as 10% of that for O₃. This effect becomes less pronounced for more O₃‐reactive surfaces. Turbulence intensity does not strongly influence the OH concentration gradient except for surfaces with an O₃ reaction probability >10^?4. Although the O₃ flux dominates OH flux under most conditions, OH flux can be responsible for as much as 10% of total oxidant uptake to otherwise low‐reactivity surfaces. Further, OH chemistry differs from that for ozone; therefore, its deposition is important in understanding the chemical evolution of some indoor surfaces and surface films.     

Determining the Characteristics of Cosmic-Radiation Nuclei in the Sileye Experiment on Board the Mir Orbital Station

An algorithm for reconstructing the characteristics (charge, mass, and energy) of cosmic-radiation nuclei with 20- to 200-MeV/nucleon energies is described. The detector is a telescope of three two-coordinate planes with two 1-mm-thick iron filters inserted between them. Each plane is composed of two strip silicon detectors with 3.6-mm-wide orthogonally oriented strips, an effective area of 6 × 6 cm², and a thickness of 380 m. The algorithm for reconstructing the nuclei characteristics is based on the analysis of how the specific ionization losses change as the nuclei pass through the filter material. The results of the Monte Carlo simulation are presented for the energy dependence of the telescope acceptance and the energy deposited in the detectors by different nuclei in view of the detector calibration on the nuclear beams of the accelerator. The mass resolution of the telescope is 30, 12, and 5% for He, N, and Al nuclei, respectively. The energy resolution, which is 20%, is much the same for all nuclei.     

In vivo lipolysis induced by heparin injection or fasting: a proton MR spectroscopy analysis of human plasma

The impact of induced lipolysis on the composition of plasma lipids is analyzed by proton magnetic resonance spectroscopy (MRS) in humans. The variations of the methylene and methyl resonances from lipids in lipoproteins are studied under two sets of lipolytic conditions: acute endovascular lipolysis induced by an intravenous injection of heparin and subacute lipolysis induced by short fasting. During acute lipolysis, the degradation of the very low density lipoproteins structures is well correlated to the modifications observed in the areas of CH₂ and CH₃ MRS signals. The comparison of regular spectra, spectra with water signal suppression, and spectra recorded with a spin-echo sequence provides information on the behavior of the different parts of the lipoproteins, that is, the neutral core, little affected by heparine-induced lipoprotein lipase (LPL) activation, and the surface layer supplying substrates to LPL. During 48 h of fasting, only limited modifications occur on the MR spectra, and lipolysis cannot be documented in details.Address for correspondence: CRMBM-CNRS, Faculté de Médecine, 27, bd Jean Moulin, 13005 Marseille, France.     

Infrared balloon experiment: improved instrumental configuration and assessment of instrument performance

During the 2002 environmental satellite Envisat mid-latitude validation campaign, a new upgraded configuration of the Infrared Balloon Experiment (IBEX) Fourier transform spectrometer, which had its first flight in 1978, performed a stratospheric balloon flight across the Mediterranean Sea. Among the substantial upgrades made to the instrument, the use of photon-noise-limited detectors permitted us to reach the theoretical limits in terms of signal-to-noise ratio. Also, important modifications were made to the interferometric system and electronics, such as the installation of a solid-state laser reference source and an onboard data recording system. During the flight, measurement of volume-mixing-ratio vertical profiles of O3, HNO3, N2O, and ClO from an altitude of approximately 38 km were performed with a vertical resolution of approximately 1.5 km.