TEM Studies of High Temperature Corrosion Behaviour of TiAl Intermetallics with Surface Modifications

The oxidation/sulphidation behaviour of a Ti‐46.7Al‐1.9W‐0.5Si alloy with a TiAl₃ diffusion coating was studied in an environment of H₂/H₂S/H₂O at 850^oC. The kinetic results demonstrate that the TiAl₃ coating significantly increased the high temperature corrosion resistance of Ti‐46.7Al‐1.9W‐0.5Si. The SEM, EDX, XRD and TEM analysis reveals that the formation of an Al₂O₃ scale on the surface of the TiAl₃‐coated sample was responsible for the enhancement of the corroison resistance. The Ti‐46.7Al‐1.9W‐0.5Si alloy was also modified by Nb ion implantation. The Nb ion implanted and as received sampels were subjected to cyclic oxidation in an open air at 800^oC. The Nb ion implantation not only increased the oxidation resistance but also substantially improved the adhesion of scale to the substrate.     

Decentralizing India's urban development

Early in 1983 the Indian Planning Commission appointed four Task Forces on Housing and Urban Development to review existing urban policies and to recommend appropriate action starting from the Seventh Plan (1985–1989). The Task Forces covered four areas of major concern: (1) urban planning, (2) urban finance, (3) urban organizations, and (4) urban shelter. They submitted their reports by the end of 1983, and taken together these constitute the most significant review of urban policy ever undertaken in India. ¹ The Task Forces had distinguished urban experts, both officials and academics, as members, with a common Member-Secretary from the Planning Commission. The common theme in all four reports is a plea for a decentralized and equitable approach towards urban development in the country.     

Anodic film studies on nickel under high rate transpassive dissolution conditions

Coulometry and Auger Electron Spectroscopy (AES) were employed to study thickness and composition of anodic films formed on nickel under high rate transpassive dissolution conditions. Nickel anodes were polarized at constant current densities up to 30 A/cm² in alkaline nitrate electrolytes of different nitrate and hydroxyl ion concentration using a flow channel cell with a constant electrolyte flow velocity of 10m/sec. Results show that with increasing current density film thickness goes through a maximum. Nitrogen is detected at the apparent film metal interface in the current region where metal dissolution occurs. No correlation between anodic film thickness and dissolution efficiency is found. The data, together with previous observations, suggest that high rate transpassive dissolution takes place from film free sites.     

Wavelet based robust sub-band features for phoneme recognition

Wavelet transform has been found to be an effective tool for the time-frequency analysis of non-stationary and quasi-stationary signals. Recent years have seen wavelet transform being used for feature extraction in speech recognition applications. In the paper a sub-band feature extraction technique based on an admissible wavelet transform is proposed and the features are modified to make them robust to additive white Gaussian noise. The performance of this system is compared with the conventional mel frequency cepstral coefficients (MFCC) under various signal to noise ratios. The recognition performance based on the eight sub-band features is found to be superior under the noisy conditions compared with MFCC features.     

Three-dimensional finite element analysis to predict the effects of SAW process parameters on temperature distribution and angular distortions in single-pass butt joints with top and bottom reinforcements

Achieving adequate top and bottom reinforcement is important to minimize angular distortions in single-pass submerged arc welded (SAW) butt joints. This is achieved in the present work by using a reusable flux-filled backing strip and proper SAW process parameters without resorting to costly distortion mitigation techniques. The butt joints were made without edge (square butts) preparation. The process was also modeled by using three-dimensional finite element analysis by incorporating the top and bottom reinforcements into the modeling. Filler material deposition was also simulated. Temperature distributions and angular distortions obtained from the modeling closely matched with the experimental values. Thus, the cost effective experimental methodology established in the present work can be utilized for minimizing angular distortions in SAW square butts. The modeling methodology adopted can be used for predicting the angular distortions in SAW square butts with top and bottom reinforcements.