Recovery of fluorocarbons in Japan as a measure for abating global warming

The objective of this study is to evaluate the potential for recovering fluorocarbons as measures for the abatement of global warming. In this study, we focused on the three different kinds of fluorocarbons: CFCs, HCFCs and HFCs, and targeted refrigerant use because of the availability of relevant data. We first estimated future fluorocarbon emissions from the targeted appliances; we next compared those emissions in the units of CO₂ equivalent to the level of CO₂ emissions in 1990 from a quantitative point of view. As the result of this study, it was found that fluorocarbon emissions in 1999 and 2010 would be equal to approximately 7 and 3% of the level of CO₂ emissions in 1990 respectively. Moreover, if we implement a 100% recovery rate in every recovery route, we can reduce a large amount of emissions which correspond to approximately 2–5% of the level of CO₂ emissions in 1990, even if we take into account the energy-related CO₂ emissions by the transportation and decomposition of fluorocarbons.     

A Novel UWB Pulse Shape Modulation System

In this paper novel modified Hermite polynomial functions for use in impulse radio (ultra-wideband) communications are proposed. With these functions pulse shapes which are orthogonal and have nearly constant pulse width regardless of the pulse order are generated. These properties hold under the effects of differentiation. An M-ary communication system is constructed using these pulse shapes. A Matlab model for generating the pulses is designed and the effect of timing jitter on the performance of the system is investigated by computer simulation.     

On a Distributed Cognitive MAC Protocol for IEEE 802.11s Wireless Mesh Networks

A distributed frequency agile medium access control (MAC) extension to the IEEE 802.11s for the next generation wireless mesh networks is proposed. The introduced protocol enhancements are capable of concurrent deployment of existing frequency opportunities in order to coordinate simultaneous data transmissions. The root concept is mainly based on the deployment of well-known ISM frequency bands, where the legacy 802.11-based wireless equipments operate, as the common control channel in order to establish contemporaneous transmissions. We apply the aforementioned key concept to the IEEE 802.11s common channel framework to attain two important goals: To improve the channel utilization using the concept of cognitive radio, and to lower the access delay. Through extensive event-driven simulations, taking into account primary user appearance in non-ISM frequency bands, performance of the proposed MAC enhancement is evaluated showing its higher efficiency compared to the existing solutions, in addition to its better wireless medium management.     

The influence of dopant species on thermal stability of NiSi film

We investigated the relationship between thermal stability of NiSi films and the implanted dopant species on Si substrates. The most stable NiSi layer appeared on Boron-implanted Si substrate, where the formation of pseudo-epitaxial transrotational structure was observed, just in case that the dose of boron is more than 5e15 atoms/cm². This unique crystallographic orientation of NiSi film on Boron-implanted substrate is a key role of thermal stability because thermal stress at grain boundary can be diminished by peculiar arrangement of transrotational domains, owing to the anisotropy in coefficient of thermal expansion (CTE) of NiSi.     

Stress-induced voiding in stacked tungsten via structure

The stress-induced voiding (SV) in Al-alloy films with stacked tungsten via structures was investigated. Voids were found in interconnections with stacked and borderless vias that had resistance increase after the aging tests. Failure occurs most frequently when the test structures are stored at approximately 250°C. This behavior can be explained by the diffusion creep model similar to SV in a flat line [1]. Finite-element simulations show that tensile stress in Al-lines between upper and lower plugs increases with temperature increase over 175°C. Al grains on W-plugs were found to have high-angle crystalline misorientation in transmission electron microscopy (TEM) observation. The tensile stress and grain misorientation should accelerate the void growth during high temperature storage. O₂ plasma post metal etch treatment is effective to eliminate SV in stacked via structure.     

Image blurring of thick specimens due to MeV transmission electron scattering: a Monte Carlo study

Image blurring of MeV transmission electrons for gold nanoparticles on the top surface of micrometer-thick specimens has been investigated using the Monte Carlo simulation. Both the simulated line density profile and therefore image blurring were in good agreement with the experimental ones in the ultrahigh voltage electron microscope. Quantitative effects of specimen thickness and electron energy on image blurring were presented, in which the specimen thickness had a greater influence. Image blurring was demonstrated to be caused mainly by multiple elastic scattering, but it could be reduced to several nanometers for a 5?μm thick epoxy-resin specimen at the electron energy of 2?MeV.     

Numerical Analysis of the Boundary Scattering Effect on Transport Properties in Bi-Sb Nanowires

In this study, we have numerically analyzed the transport properties of Bi-Sb nanowires, taking into account wire boundary scattering. Wire boundary scattering slightly decreased the Seebeck coefficient of Bi-Sb nanowires. This effect is due to the observation that boundary scattering and the mobility ratio of L-point electrons to T-point holes in the nanowires are smaller than those in bulk Bi-Sb because the wire boundary scattering suppresses the mobilities of L-point electrons and heavy holes. The largest Seebeck coefficient for all wire diameters was obtained when the Sb concentration was 5 at.%. The effective mass approached zero near 5 at.% Sb, and the small effective mass led to a large subband shift in each band. Thus, a small effective mass enhances the quantum effect at a fixed wire diameter, even if wire boundary scattering is taken into account.     

Mutational analysis of structure--activity relationships in human tumor necrosis factor-alpha

To determine the region of human tumor necrosis factor-alpha(TNF-), essential for cytotoxic activity against mouse L-M cells,single amino-acid-substituted TNF- mutant proteins (muteins)were produced in Escherichia coli by protein engineering techniques.An expression plasmid for TNF- was mutagenized by passage throughan E.coli mutD5 mutator strain and by oligonucleotide-directedmutagenesis. Approximately 100 single amino-acid-substitutedTNF- muteins were produced and assayed for cytotoxic activity.The cytotoxic activities of purified TNF- muteins, e.g. TNF-31T,-32Y, -82D, -85H, -115L, -141Y, -144K and -146E, were < 1%of that of parent TNF-. These results indicate that the integrityof at least four distinct regions of the TNF- molecule is requiredfor full biological activity. These regions are designated asfollows: region I, from position 30 to 32; region II, from position82 to 89; region III, from position 115 to 117; region FV, fromposition 141 to 146. In addition, TNF-141Y could not completelycompete with parent TNF- for binding to the receptor. This demonstratesthat region IV, and at least aspartk acid at position 141, mustbe involved in the TNF receptor binding site.     

Evaluation of Chinese hamster ovary cell stability during repeated batch culture for large-scale antibody production

Pharmaceutical manufacturing plants can be operated continuously for several months. It is therefore important to use cells with long-term stability for the production of active ingredients. We investigated the reliability and long-term stability of an antibody-producing cell line. A recombinant Chinese hamster ovary (CHO) cell line was cultivated in spinner flasks and reactors, including a practical production-scale reactor (1600 L), for 109 days to produce monoclonal antibodies against the HM1.24 antigen. During cultivation, the cells remained stable and there was an increase in the rate of cell proliferation, yielding viable cells at high density. A decrease in cell-specific productivity was associated with this increase in the rate of cell proliferation. The cells were genetically stable and other measures of cellular function remained consistent throughout the cultivation period.