Reliability investigation of 0.07-/spl mu/m InGaAs-InAlAs-InP HEMT MMICs with pseudomorphic In/sub 0.75/Ga/sub 0.25/As channel

The authors have investigated the reliability performance of G-band (183 GHz) monolithic microwave integrated circuit (MMIC) amplifiers fabricated using 0.07-/spl mu/m T-gate InGaAs-InAlAs-InP HEMTs with pseudomorphic In/sub 0.75/Ga/sub 0.25/As channel on 3-in wafers. Life test was performed at two temperatures (T/sub 1/ = 200 /spl deg/C and T/sub 2/ = 215 /spl deg/C), and the amplifiers were stressed at V/sub ds/ of 1 V and I/sub ds/ of 250 mA/mm in a N/sub 2/ ambient. The activation energy is as high as 1.7 eV, achieving a projected median-time-to-failure (MTTF) /spl ap/ 2 /spl times/ 10/sup 6/ h at a junction temperature of 125 /spl deg/C. MTTF was determined by 2-temperature constant current stress using /spl Delta/G/sub mp/ = -20% as the failure criteria. The difference of reliability performance between 0.07-/spl mu/m InGaAs-InAlAs-InP HEMT MMICs with pseudomorphic In/sub 0.75/Ga/sub 0.25/As channel and 0.1-/spl mu/m InGaAs-InAlAs-InP HEMT MMICs with In/sub 0.6/Ga/sub 0.4/As channel is also discussed. The achieved high-reliability result demonstrates a robust 0.07-/spl mu/m pseudomorphic InGaAs-InAlAs-InP HEMT MMICs production technology for G-band applications.     

Dynamic programming implementation on array processor architectures

Dynamic Programming (DP) applies to many signal and image processing applications including boundary following, the Viterbi algorithm, dynamic time warping, etc. This paper presents an array processor implementation of generic dynamic programming. Our architecture is a SIMD array attached to a host computer. The processing element of the architecture is based on an ASIC design opting for maximum speed-up. By adopting a torus interconnection network, a dual buffer structure, and a multilevel pipeline, the performance of the DP chip is expected to reach the order of several GOPS. The paper discusses both the dedicated hardware design and the data flow control of the DP chip and the total array.This work was supported in part by the NATO, Scientific and Environmental Affairs Division, Collaborative Research Grant SA.5-2-05(CRG.960201)424/96/JARC-501.     

Screen‐printed biosensor for allergens

Allergen levels in indoor environments, leading to many diseases, eg asthma, rhinitis and conjunctivitis, affect a large and increasing fraction of the population. A quite effective and inexpensive method of a rough but very rapid overall assessment of total allergen level in the environment has been developed. The method involved estimation of protein in allergen extracts by screen‐printed electrodes using two different techniques. The biosensor comprised a rhodinised carbon working electrode, a silver/silver chloride reference electrode and a carbon counter electrode. In the first method the enzyme protease reacted with allergen protein to release amino acid, which produced hydrogen peroxide in the presence of amino acid oxidase. This was detected amperometrically. The second method used potassium bromide as electrolyte and the electrode was subjected to dual potential. Bromine, released due to electrolysis at higher potential, was consumed by the allergen protein at lower potential. In the first method, a unique technique was used to microencapsulate the enzyme protease and immobilise it on the surface of the electrode by in‐situ polymerisation to avoid contact with the amino acid oxidase. A total of seven allergens were tested and the results gave a good correlation with the standard protein measurement method. Environmental specimens from indoors, schools and workplaces can be evaluated for the aeroallergens produced by dust mites, animal hairs, cockroach debris, pollens, etc as a means of determining the exposure risk. Copyright © 2005 Society of Chemical Industry     

Differences in risk factors for being either a hepatitis B carrier or anti-hepatitis C+ in a hepatoma-hyperendemic area in rural Taiwan

This is a study of the differences in the risk factors for being either hepatitis B surface antigen positive [HBsAg(+)] or antibody to hepatitis C virus positive [Anti-HCV(+)] in A-Lein, a rural area in southern Taiwan, an area which also has a high hepatoma mortality rate. Three hundred eighty-five patients age > or =40 years participated in hepatoma screening at the A-Lein Community Health Center during 1995. Those who were HBsAg(-) and anti-HCV(-) or had coinfection of HBsAg(+) and anti-HCV(+) were excluded, leaving 293 patients: 109 HBsAg(+) and 184 anti-HCV(+). The anti-HCV(+) patients had a lower socioeconomic status (as defined by level of education and type of occupation) and were older than HBsAg(+) patients (P < 0.05). Those with higher alanine aminotransferase levels (ALT) also had a higher anti-HCV(+) to HBsAg(+) odds ratio (OR), and a dose response relationship was found, P < 0.0001. Anti-HCV(+) patients were more likely than HBsAg(+) patients to have a spouse who shared the infection, OR = 5.11; 95% CI, 2.30-11.28. Anti-HCV(+) patients were more likely than HBsAg(+) patients to have had blood transfusions (OR = 2.66; 95% CI, 1.20-5.89), frequent medical injections (OR = 2.64; 95% CI, 1.62-4.31), or injections by non-licensed medical providers (OR = 1.91; 95% CI, 1.18-3.09). Multiple logistic regression analysis showed that the significant factors for anti-HCV(+) patients vs. HBsAg(+) patients are drinking habit (OR = 3.45; 95% CI, 1.02-11.60), age (OR = 6.33; 95% CI, 2.93-13.68), and frequent medical injections (OR = 2.88; 95% CI, 1.65-5.03). The transmission of hepatitis C in A-Lein is closely related to low socioeconomic status, age, alcohol abuse, spouses being anti-HCV(+), and frequent medical injections, especially from non-licensed medical providers, including both pharmacists and those with no medical licensing whatsoever. These nonlicensed medical providers sometimes reuse needles to save money, which is a likely route of infection.     

Economic analysis and optimization of tool portfolio in semiconductor manufacturing

The tool portfolio of a plant refers to the makeup, in quantity and type, of processing machines in the plant. It is determined by taking into consideration the future trends of process and machine technologies and the forecasts of product evolution and product demands. Portfolio planning is also a multicriteria decision-making task involving tradeoffs among, investment cost, throughput, cycle time, and risk. Tool portfolio planning is a complex task that has strong bearing on manufacturing efficiency. In the first part of this paper, a multicriteria economic decision model is presented for optimal configuration. of the portfolio and to determine the optimal factory loading. The second and third parts of the paper contain applications of the model. If plants are closely located or have a twin-plant design, portfolio planning at multiple plants can be integrated to enhance the overall effectiveness of portfolios. In the second part, a novel methodology for arbitrating capacity backup between plants is described. Because the economic model is constructed upon a valuation of both cycle time and throughput, it is a suitable method for the evaluation of cycle time reduction projects. The application procedure is outlined in the third part.     

Reliability assessment for solders with a stress buffer layer using ball shear strength test and board-level finite element analysis

The stress buffer layer (SBL) is a widely applied improvement in many advanced packages used to release the stress concentration at solder joints. However, it has been generally found that the metal line adjacent to the SBL may suffer larger deformation and its reliability should be addressed. In this study, the panel level package (PLP) technology with solder on polymer (SOP) structure is selected as the testing sample to investigate the effect of SBL. The ball shear strength test is conducted first to investigate the reliability of metal trace in PLP. In addition, finite element (FE) analysis is applied to understand the actual thermo-mechanical behavior of PLP after its assembly. The package-level and board-level reliability assessments are compared, and the suggested layout of the redistribution layer on the SBL is provided herein.     

Isolation and characterization of three Dictyostelium myosin-I isozymes

Using ion exchange chromatography and an ATP-dependent actin precipitation step, we have isolated three myosin-I isozymes that, together, account for most of the K+EDTA-ATPase activity recovered from extracts of Dictyostelium. The two major myosin-I isozymes, present in approximately equal amounts, had apparent molecular masses of 125 kDa on SDS gels and have been identified by amino acid sequence analysis as the products of the Dictyostelium myosin-IB (DMIB) and myosin-ID (DMID) genes. DMIB, with a specific K+EDTA-ATPase activity 10-fold higher than DMID, was responsible for most of the activity in cell extracts. The third isozyme, present in low amounts, had an apparent molecular mass of 137 kDa on SDS gels and is too large to be the product of any of the known myosin-I genes. DMIB eluted from DE53 cellulose columns as two distinct peaks (II and III). Addition of the phosphatase inhibitor okadaic acid to the extraction buffer increased the fraction of DMIB recovered from growth phase cells in peak III from 35 to 70%. DMIB isolated from peak III, but not from peak II, displayed a significant level of actin-activated MgATPase activity. These results indicate that peak III represents a phosphorylated, actin-activatable form of DMIB.     

Effects of hot carrier induced interface state generation insubmicron LDD MOSFET's

A two-dimensional numerical simulation including a new interface state generation model has been developed to study the performance variation of a LDD MOSFET after a dc voltage stress. The spatial distribution of hot carrier induced interface states is calculated with a breaking silicon-hydrogen bond model. Mobility degradation and reduction of conduction charge due to interface traps are considered. A 0.6 μm LDD MOSFET was fabricated. The drain current degradation and the substrate current variation after a stress were characterized to compare the simulation. A reduction of the substrate current at V_g ≃0.5 V_d in a stressed device was observed from both the measurement and the simulation. Our study reveals that the reduction is attributed to a distance between a maximum channel electric field and generated interface states     

Rorschach cognitive developmental indices of mentally retarded persons: a comparison with scores on Wechsler Intelligence Scale for children-revised

The complete mechanism by which pathogenic mtDNA mutations cause cellular pathophysiology and in some cases cell death is unclear. Oxidant stress is especially toxic to excitable nerve and muscle cells, cells that are often affected in mitochondrial disease. The sensitivity of cells bearing the LHON, MELAS, and MERRF mutations to oxidant stress was determined. All were significantly more sensitive to H2O2 exposure than their nonmutant cybrid controls, the order of sensitivity was MELAS > LHON > MERRF > controls. Depletion of Ca2+ from the medium protected all cell lines from oxidant stress, consistent with the hypothesis that death induced by oxidant stress is Ca(2+)-dependent. A potential downstream target of Ca2+ is the mitochondrial permeability transition, MPT, which is inhibited by cyclosporin A. Treatment of MELAS, LHON, and MERRF cells with cyclosporin A caused significant rescue from oxidant exposure, and in each case significantly greater rescue of mutant than control cells. The pronounced oxidant-sensitivity of mutant cells, and their protection by Ca2+ depletion and CsA, has potential implications for both the pathophysiological mechanism and therapy of these mitochondrial genetic diseases.     

Cation interdiffusion between thick film of YBa2Cu3O7-δ and ceramic substrate

Thick films of superconducting oxides, YBa₂Cu₃O_7-, were successfully made by conventional screen-printing technology on Al₂O₃, MgO, and ZrO₂ substrates. Interdiffusion between the superconductive film and substrate was investigated using analytical electron microscopy. The results indicate that MgO and ZrO₂ are superior to Al₂O₃ for substrate materials.