Investigation of fusion reactions in palladium and titanium tritide using galvanostatic,coulometric, and hydrogen permeation techniques

We describe several electrochemical methods used to investigate the possibility of cold fusion phenomena in palladium and titanium tritide cathodes. We performed long-term (up to 77 days) electrolysis experiments with electrochemical cells of the University of Utah type at current densities as high as 1 A/cm², while monitoring neutron and tritium levels. With some cells, we pulsed the current to determine if neutron bursts would result. In another cell, we used titanium tritide as the cathode to determine if D-T reactions yielding neutrons would occur. In no instance were levels of neutrons or tritium significantly above background except in the titanium tritide cell where isotopic exchange, occcurring between the electrode and the electrolyte, resulted in significant tritium levels. We also combined x-ray photoelectron spectroscopy (XPS) and electrochemical hydrogen permeation experiments to determine the effectiveness of various Pd surface treatment procedures on the resultant electrochemical hydrogen absorption efficiency. Electroanalytical and thermal desorption/gas analysis techniques indicated the maximum loading of H in Pd was to a ratio of HPd=0.8.     

Continuous and discrete data rebinning in time-of-flight PET

This paper investigates data compression methods for time-of-flight (TOF) positron emission tomography (PET), which rebin the 3-D TOF measurements into a set of 2-D TOF data for a stack of transaxial slices. The goal of this work is to develop rebinning algorithms that are more accurate than the TOF single-slice-rebinning (TOF-SSRB) method proposed by Mullani in 1982. Two approaches are explored. The first one is based on a partial differential equation, which expresses a consistency condition for TOF-PET data with a Gaussian TOF profile. From this equation we derive an analytical rebinning algorithm, which is unbiased in the limit of continuous sampling. The second approach is discrete: each 2-D rebinned data sample is calculated as a linear combination of the 3-D TOF samples in the same axial plane parallel to the axis of the scanner. The coefficients of the linear combination are precomputed by optimizing a cost function which enforces both accuracy and good variance reduction, models the TOF profile, the axial PSF of the LORs, and the specific sampling scheme of the scanner. Measurements of a thorax phantom on a prototype TOF-PET scanner with a resolution of 550 ps show that the proposed discrete method improves the bias-variance trade-off and is a promising alternative to TOF-SSRB when data compression is required to achieve clinically acceptable reconstruction time.     

Optimizing rod window width in positron emission tomography

A technique determines the optimal window width for orbiting rod transmission studies in positron emission tomography (PET). Windowing reduces noise in orbiting rod transmission studies. Lines-of-response (LOR) which intersect the rods generate primarily true coincidence events. LOR which pass far from the rods generate random and scatter events. Since the angular position of the orbiting rods is known in real-time, LOR which produce mostly noise are gated off. When optimally determined, the rod window width maximizes the noise equivalent counts (NEC) collected in the transmission study. Transaxial rod projection profiles of trues, randoms, and scatter produce NEC versus window width plots. For the ECAT EXACT line of PET systems and a 20-cm water cylinder, optimal is five LOR wide.     

Physical characteristics of the ECAT 953B/31: a new high resolution brain positron tomograph

A high spatial resolution brain positron tomograph, the ECAT 953B/31, is presented. The machine consists of two 76.5 cm diameter rings (patient port diameter: 36 cm) made of 24 8x8 BGO detector blocks each, each block being coupled to four 1 in(2) Hammamatsu phototubes. The machine has 15 9 cmx1 mm motorized removable septa, which allows reconstruction of 31 slices 3.375 mm apart. The transaxial resolution (FWHM) in the reconstructed image (with wobbling) is 4.5 mm at center, 5.2 mm (tangential) and 5.6 mm at 10 cm from center. With septa out of the field of view (FOV), the axial resolution degrades to 5.5 mm a center and 6.3 mm at 10 cm from center. At 1 muCi/cc with a 250 keV threshold and a 12 ns coincidence window, the sensitivity is 146100 true events, the ratio of randoms to trues is 0.10, the scatter fraction is 17% and the dead-time losses are 30%. With septa out of the FOV, the sensitivity is increased by a factor 3.6, while the scatter fraction reaches 0.9. Images obtained with (18 )F-DG and H(2)(15)O in human brains and (18 )F-DOPA in a baboon brain demonstrate that the ECAT 953B/31 will be suitable for high resolution and for low count rate brain studies.     

Implementation of an Aerostat Positioning System With Cable Control

The capabilities of a multi-tethered aerostat positioning system are investigated using experimental and simulation results. The system consists of a platform supported by a helium-filled aerostat and attached to three anchored ground tethers actuated using computer-controlled winches. The experimental system was designed to perform a proof-of-concept study of a novel large-scale radio telescope requiring a receiver to be positioned accurately at an altitude of up to 500 m. Results from a series of flight tests are presented with a comparison between the passive response of the system and the response using proportional, integral, and derivative (PID) controllers with a position feedback. The motion of the platform is smaller for all cases using the feedback control. To improve on the PID results, a dynamics model of the system is used to develop and simulate optimal and feedforward (FF) control strategies. The optimal linear quadratic Gaussian (LQG) controller offers a 50% improvement over the PID controller, and both the LQG and the PID feedback controllers were shown to benefit considerably from the addition of a FF control term that exploits the measurements of the system's main disturbance force     

The effect of fertilizer nitrogen input to grass-clover swards and calving date on the productivity of pasture-based dairy production

The objective of this systems-scale study was to investigate grazing season timeframes on pasture and milk production and on milk processability of dairy systems with compact spring-calving dairy cows grazing white clover (Trifolium repens L.) based grassland. Fifty-four primiparous and multiparous Holstein-Friesian dairy cows were used in a one-factor study with 3 systems (n = 18) and repeated over 2 yr (2008/09 and 2009/10). The 3 systems were: early spring calving with annual fertilizer N input of 100 kg·ha^?1 applied in spring (ES100N; 2.1 cows·ha^?1; grazing February to November), early spring calving without fertilizer N (ES0N; 1.6 cows·ha^?1; grazing February to November) and late spring calving without fertilizer N (LS0N; 1.53 cows·ha^?1; grazing April to January). Annual pasture production was affected by an interaction between grazing system and year: Mean annual pasture yields for 2008 and 2009 were ES100N; 10.35 and 9.88, ES0N; 8.88 and 8.63, LS0N; 9.18 and 10.31 t of dry matter (DM)·ha^?1 (SEM 0.39). LS0N had higher pasture DM yield in 2009 due to higher clover DM production and biological N fixation compared with the other systems. Clover stolon and root mass in the following February was correlated with stolon and root mass in the previous November with 64% of stolon mass present on LS0N in February (R² = 0.84). There were no detectable differences in per-lactation milk yield (6,335 kg·cow^?1), fat, protein and lactose yields (271, 226, 297 kg·cow^?1, respectively), cow liveweight (585 kg) or body condition score (3.02). Although winter grazing favored subsequent clover DM production, biological N fixation and pasture DM production, delaying calving date in spring and extending lactation into the following winter led to inefficient use of this pasture by the grazing herd and lowered the quality of late-lactation milk for processing purposes. Hence, a mean calving date in mid- to late-February is recommended for zero-fertilizer N input clover-based grassland.     

A CONVENIENT DOMINANT SELECTION MARKER FOR GENE TRANSFER IN INDUSTRIAL STRAINS OF SACCHAROMYCES YEAST: SMRI ENCODED RESISTANCE TO THE HERBICIDE SULFOMETURON METHYL

The SMR1-410 gene of S. cerevisiae, encoding resistance to the herbicide sulfometuron methyl (SM), was used as a dominant selection marker in yeast replicating and yeast integrating vectors for the transformation of wild type strains of baking, brewing (ale and lager), distilling, wine and sake Saccharomyces yeasts. Transformation of lithium treated cells by a YEp vector resulted in transformation frequencies ranging from 200 to 8,000 transformants per 10 ug of DNA. Utilizing a yeast integrating vector with SMR1–410 as the only yeast DNA sequences, it was demonstrated that a single copy of SMR1–410 is sufficient to confer stably inherited SM resistance. Thus the SMR1–410 sequence has the unique ability to act as a selectable marker and to also provide a site for chromosomal integration. Since transformants were resistant to levels at least seven fold higher than wild type strains the resistance phenotype was clearly expressed and easily scored in all industrial strains tested. Unlike other selection markers derived from mammalian or bacterial cells, SMR1–410 is derived from S. cerevisiae. Thus industrial utilization of this marker as a means of genetically improving food and beverage strains of Saccharomyces yeasts by recombinant DNA technology is enhanced, as government regulatory agencies are likely to view it in a more favourable light.     

Acute choroidal ischemia as a complication of photocoagulation

Acute choroidal vascular insufficiency as a complication of photocoagulation has been little noticed. In 17 eyes of 16 patients photocoagulated with either xenon or argon sources for proliferative sickle cell retinopathy, gray lesions of the fundus developed peripheral to the photocoagulation sites. Histologic examination of similar gray lesions produced in monkeys showed necrosis and atrophy of the outer half of the retina. Intense photocoagulation of the human fundus, even with smaller spot sizes, may occlude a choroidal artery, producing separate gray lesions of distinctive shape. The lesions in both the patients and the monkeys progressed to granular hyperpigmentation by two to three weeks after photocoagulation.