Voltage-time characteristics for steep-front impulse voltages ofparticle-contaminated spacers in SF6 gas-insulated switchgear

The voltage-time characteristics of spacer surfaces for steep-front impulse waves are investigated under a particle-contaminated condition in SF₆ gas. The characteristics are measured as a function of particle length, particle position, and space shapes. Flashover voltages monotonically increase in the submicrosecond region as time to flashover is shorter, and are a minimum in the 1 μs region. Applicability of the equal voltage-time area criterion for estimating the voltage-time characteristics is discussed and the estimation is clarified. Moreover, it is demonstrated that an optimized spacer with ribs greatly improves flashover voltages in the submicrosecond region as well as in the 1 μs and power frequency region     

Longitudinal elastic waves in columns due to earthquake motion

An analysis is presented of longitudinal waves in a thin elastic column. Velocity is specified at one end, and the boundary condition at the other end is expressed in terms of a range of effective impedances of an attached structure. Propagation, reflection and interference of the waves are followed by the method of characteristics. Integration of differential equations along characteristics yields the wave-induced stress, which is then applied to problems of earthquake excitation. Numerical examples are given for recorded updown ground motion of the Kobe Earthquake.     

Real-Time Amplitude and Phase Imaging of Optically Opaque Objects by Combining Full-Field Off-Axis Terahertz Digital Holography with Angular Spectrum Reconstruction

Terahertz digital holography (THz-DH) has the potential to be used for non-destructive inspection of visibly opaque soft materials due to its good immunity to optical scattering and absorption. Although previous research on full-field off-axis THz-DH has usually been performed using Fresnel diffraction reconstruction, its minimum reconstruction distance occasionally prevents a sample from being placed near a THz imager to increase the signal-to-noise ratio in the hologram. In this article, we apply the angular spectrum method (ASM) for wavefront reconstruction in full-filed off-axis THz-DH because ASM is more accurate at short reconstruction distances. We demonstrate real-time phase imaging of a visibly opaque plastic sample with a phase resolution power of λ/49 at a frame rate of 3.5 Hz in addition to real-time amplitude imaging. We also perform digital focusing of the amplitude image for the same object with a depth selectivity of 447 μm. Furthermore, 3D imaging of visibly opaque silicon objects was achieved with a depth precision of 1.7 μm. The demonstrated results indicate the high potential of the proposed method for in-line or in-process non-destructive inspection of soft materials.     

Contrast enhancement in the phase plate transmission electron microscopy using an objective lens with a long focal length

A new optical condition using an objective lens (OL) of a long focal length (objective mini lens: OM) was tested to enhance image contrast in phase plate transmission electron microscopy (P-TEM). A phase plate was set on the selected area aperture plane where diffraction patterns were formed under the optical condition using the OM. A phase shift by the phase plate was added to the electron waves to visualize phase objects. The application of the OM to the P-TEM should provide higher phase contrast than that obtained by the OL for the phase objects. One of the reasons for the contrast enhancement is that high-angle scattering electron waves which would give the background intensity were not used for image formation due to the large spherical aberration. Another reason is that the cut-on frequency above which the phase shift was added by the phase plate could be smaller using the OL with a long focal length. Experimental results and model calculations showed the contrast enhancement of the biological specimens using the OM.     

Image analysis of morphological change during arachidonic acid production by Mortierella alpina 1S-4

The changes in mycelial morphology during arachidonic acid (AA) production by Mortierella alpina 1S-4 were investigated using an image analysis system. Cultivation was performed in a 10-kl fermentor, and the culture broth was separated into two fractions by sieving (0.5 mm aperture size): the filament fraction (F-fraction, <0.5 mm), and the pellet fraction (P-fraction, >0.5 mm). The effect of the mycelial morphology in each fraction on AA production was analyzed. As a result, a product distribution in the culture broth wherein the AA content in the mycelia of the P-fraction was observed to be higher than that in the mycelia of the F-fraction throughout the cultivation. Morphological analysis of the P-fraction revealed that the hairy pellets became smooth because the mycelia on the pellet surface were shaved off; some pellets were broken and reduced in size. The shaved-off mycelia from the hairy pellets surface moved into the F-fraction and aggregated there. From the above findings, it was likely that the low AA content in the F-fraction was due to mycelial damage during the cultivation. In addition, the morphology of the hairy pellets was found to contribute to an increase in the viscosity of culture broth.     

Silicon based on-chip antenna using an LC resonator for near-field RF systems

This paper presents the silicon based on-chip antenna using a LC resonator. The proposed antenna consists of a stacked capacitor and a spiral inductor on silicon substrate. The spiral inductor structure without underpass was proposed for improvement the performance of the silicon based-antenna. The resonant frequency of the fabricated antenna was measured as 465 MHz. Its return loss was 23.4 dB at resonant frequency. The antenna has a gain of ?35.75 dBi due to small size and silicon substrate. However, the fabricated antenna has good performance in the near-field.     

用于先进PCB制造工艺的叠层封装

在20世纪90年代,球栅阵列封装(BGA)和芯片尺寸封装(CSP)在封装材料和加工工艺方面达到了极限。这2种技术如同20世纪80年代的表面安装器件(SMD)和70年代通孔安装器件(THD)一样,在电学、机械、热性能、尺寸、质量和可靠性方面达到最大值。目前,三维封装正在成为用于未来采用的先进印制板(PCB)制造工艺的下一个阶段。它们可以分为圆片级封装、芯片级封装、和封装面。叠层封装(PoP)是一种封装面叠层封装类型的三维封装技术[15]。     

A new model of stress ulcer in the rat with pylorus ligation and its pathogenesis

Water-immersion stress for 7, 14, or 20 hr consistently induced linear or punctate stress ulcers (mucosal erosions) in the corpus of the stomach in intact rats. When the pylorus of the stomach had been ligated prior to stressing, the stress ulcers changed their morphological feature (mainly punctate and in one place elongated) and location (both in corpus and antrum). Histologically, the stress ulcer developed in the proximal antrum of pylorus ligated rats and penetrated into the muscularis mucosa. Sodium bicarbonate, chlorpromazine, hexamethonium, atropine, metiamide, and bilateral vagotomy markedly inhibited the stress ulcers which developed in the pylorus-ligated rats. Phentolamine and propranolol hardly affected the development of stress ulcers. Amylopectine evoked a new type of stress ulcer in the corpus when it was given to the pylorus-ligated rats.     

Effects of various amino acids on gastric lesions induced by acetylsalicylic acid (ASA) and gastric secretion in pylorus-ligated rats

The simultaneous oral administration of various amino acids such as L-lysine, L-arginine, L-histidine, L-serine and others at 750, 250 or 83.3 mg/kg in pylorus-ligated rats produced a marked prevention of the gastric mucosal damages caused by oral acetylsalicylic acid (ASA) at 100 mg/kg. In regard with L-lysine and L-arginine, it was assumed that these amino acids might inhibit the ASA-induced gastric lesions through neutralization of acid because of the high alkalinity of these amino acids. In addition, the lesser effect of the hydrochoride salts of these amino acids as compared with the free form on ASA-induced gastric lesions was observed. The other effective amino acids markedly prevented the back diffusion of acid in response to ASA, suggesting as one of the possible mechanisms of lesion formation. However, L-cysteine, which exerted insignificant effect on ASA-induced gastric lesions, also prevented the back diffusion of acid even though the Na+ concentration had not returned to the control level.     

Determination of number-average and weight-average molecular weights of polymer sample from diffusion and sedimentation velocity measurements in theta solvent

Several methods to determine number-average molecular weight M_n and weight-average molecular weight M_w, of a polymer sample are proposed from diffusion and sedimentation velocity measurements at the θ point. According to these methods, M_n and M_w are determined from the diffusion constant vs. molecular weight relationship, and also from the equations of Svedberg and Flory–Mandelkern, using the 2nd-order and the –2nd-order diffusion constants. These methods have been applied to four samples of polydisperse polystyrene in the θ solvent, cyclohexane at 35°C. It was experimentally ascertained that M_n and M_w of each sample determined by the present methods were in good agreement with the results of column fractionation, light scattering, and calculated values from molecular weight distribution curve within experimental errors. It is concluded that the present methods are useful for determining M_n and M_w, since the reliabilities of M_n and M_w values, which are fundamental quantities of polymer characterization, can be raised by comparing the experimental data observed by conventional methods such as osmotic pressure, light scattering, and the Archibald method with those observed by the present methods.