A computer vision system for the characterization andclassification of flames in glass furnaces

A computer vision system for dealing with both flame analysis and classification problems is described. The vision system performs classification tasks, assigning each visualized flame to a previously established class of flames. Each flame class corresponds to a specific operating point of the furnace, and this information can be useful not only for monitoring purposes but also for purposes controlling the whole furnace. Two different classifiers were designed and compared. One exploits a Bayesian formulation, and the other is based on neural networks. They system was first tested in a laboratory environment, where different operating conditions were created through the variation of the burners geometry, the number of active burners, and the rate of fuel used. In a second stage, the vision system was tested in an industrial environment. The results obtained are presented and discussed     

Effect of Ni and SAPO-34 co-additive on enhancing hydrogen storage performance of MgH2

The hydrogen storage performances of MgH₂ improved by the addition of Ni and SAPO-34 were studied in detail. The mixture of MgH₂ with Ni and SAPO-34 was a physical reaction as shown by the X-ray diffraction (XRD) results. The SAPO-34 and Ni were uniformly distributed on the surface of MgH₂. The thermodynamic and kinetic properties of 90MgH₂/5Ni/5SAPO-34 were investigated by differential scanning calorimetry (DSC) and pressure-composition-isothermal (PCI) methods. The results showed that the dehydrogenation activation energy of 90MgH₂/5Ni/5SAPO-34 decreased by 64.3 kJ/mol compared with that of MgH₂. In addition, the relationship between the value of dehydrogenation heat and hydrogen content was also investigated by in-situ calorimetry. The enthalpy value of each sample in the dehydrogenation processes were calculated by in-situ calorimetry measurement. The dehydrogenation enthalpies of as-milled MgH₂ and 90MgH₂/5Ni/5SAPO-34 were 63.2 kJ/mol H₂ and 53.6 kJ/mol H₂, respectively. Thus, the co-doping of Ni and SAPO-34 contributed significantly to decrease the thermodynamic stability and improve the hydrogen sorption kinetic properties of MgH₂.     

Familial myeloproliferative syndrome

Familial chronic myeloproliferative syndrome (CMS) was observed in five members from two different generations of the same kindred. Diagnosis included agnogenic myeloid metaplasia (case 1), polycythemia vera (case 2), and essential thrombocythemia (cases 3-5). Cases 1-3 were siblings, case 5 was the daughter of case 1, and case 4 was the cousin of cases 1, 3. Age at diagnosis ranged from 28 to 75 years, cases 1 and 3 were male, and the others were female. The diagnosis was made after an episode of cerebral thrombosis in one patient, during a study for headache and dizziness in another, and fortuitously in the three remainders. All patients had splenomegaly and varying degrees of thrombocytosis. The cytogenetic exam was normal in all four cases. A woman patient was treated with interferon during a pregnancy. Fetal growth was retarded, and the newborn showed bone and genital malformations. No environmental leukemogen factor was found. This familial case strengthens Dameshek's theory of a common pathogenesis of CMS and suggests a genetic and hereditary etiology.     

Determination of dislocation densities in HCP metals from X-ray diffraction line-broadening analysis

X-Ray diffraction (XRD) line-broadening analysis has been performed on highly textured Zr-2.5Nb specimens which had been deformed in tensile tests to produce well-controlled dislocation structures. An iterative deconvolution method has been applied to extract the broadening function for the material, using as standards, a Zr single crystal and a 0 pct deformed specimen. In both cases, for specific tensile tests, a significant contribution to the basal line braodening was observed, which was clearly not directly related to the dislocation structure generated by the deformation, i.e., so-called c-component dislocations having a component of their Burgers vectors perpendicular to the basal plane. Calculations showed that the extent of basal line broadening cannot be attributed to the secondary effect of strain from a-type dislocations, i.e., dislocations with Burgers vectors parallel with the basal plane. It is concluded that most of the line broadening observed was the result of intergranular strain distributions. These distributions are most prominent for grains oriented with their c-axes perpendicular to the tensile-deformation axis and resulted in basal-plane line broadening even when there were few, if any, c-component dislocations present. This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science and Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.     

GAME

突袭部队；幽灵行动之尖锋战士；VR网球3；忍者神龟；教父 阁下版……     

Genetic algorithm optimisation of the maintenance scheduling of generating units in a power system

A new method for optimisation of the maintenance scheduling of generating units in a power system is developed. Maintenance is scheduled to minimise the risk through minimisation of the yearly value of the loss of load expectation (LOLE) taken as a measure of the power system reliability. The proposed method uses genetic algorithm to obtain the best solution resulting in a minimal value of the annual LOLE value for the power system in the analysed period. The operational constraints for generating units are included in the method. The proposed algorithm was tested on a Macedonian power system and the obtained results were compared with the results received from the approximate methodology. The results show the improved reliability of a power system with the maintenance schedule obtained by the new method compared to the results from the approximate methodology.     

Resistance of Alkali-Activated Blended Volcanic Ash-MSWI-FA Mortar in Sulphuric Acid and Artificial Seawater

Silicon - This paper investigates the resistance of alkali-activated binder from volcanic ash (VA) + Municipal Solid Waste Incinerator Fly Ash (MSWI-FA) system exposed into sulphuric...     

Determination of dislocation densities in HCP metals from X-ray diffraction line-broadening analysis

X-Ray diffraction (XRD) line-broadening analysis has been performed on highly textured Zr-2.5Nb specimens which had been deformed in tensile tests to produce well-controlled dislocation structures. An iterative deconvolution method has been applied to extract the broadening function for the material, using as standards, a Zr single crystal and a 0 pct deformed specimen. In both cases, for specific tensile tests, a significant contribution to the basal line broadening was observed, which was clearly not directly related to the dislocation structure generated by the deformation, i.e., so-called c-component dislocations having a component of their Burgers vectors perpendicular to the basal plane. Calculations showed that the extent of basal line broadening cannot be attributed to the secondary effect of strain from a-type dislocations, i.e., dislocations with Burgers vectors parallel with the basal plane. It is concluded that most of the line broadening observed was the result of intergranular strain distributions. These distributions are most prominent for grains oriented with their c-axes perpendicular to the tensile-deformation axis and resulted in basal-plane line broadening even when there were few, if any, c-component dislocations present. This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science and Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.