Drying with Chemical Reaction in Cocoa Beans

Desirable flavor qualities of cocoa are dependent on how the cocoa beans are fermented, dried, and roasted. During fermentation and drying, polyphenols such as leucocyanidin and apecatechin are oxidized by polyphenols oxidase to form o-quinone, which later react nonenzymatically with a hydroquinone in a condensation reaction to form browning products and moisture. The objective of this article is to model the cocoa beans drying together with the browning reaction. A Luikov drying model for the moisture and a simple Fick's law diffusion model combined with first-order reactions for both the enzymatic oxidation and nonenzymatic condensation reactions were constructed. Both models were used to identify moisture diffusivity coefficient and total polyphenols diffusivity in cocoa beans from experimental drying and polyphenols degradation data and published kinetic data of the reactions. The theoretical drying model fitted the experimental cocoa bean drying curves with low mean square of residuals. The polyphenols diffusion and reaction model also fitted the experimental polyphenols degradation curves with minimum mean residual squares. The rate of polyphenols degradation in the cocoa beans increases at higher temperature and higher relative humidity. This is because the increasing reaction rate of polyphenols oxidation reaction as well as higher moisture diffusion at higher relative humidity and temperature. The effective moisture diffusivity in cocoa beans is estimated to be between 8.194 × 10^-9 and 8.542 × 10^-9 m²·s^-1, which is of the same order of magnitude as published data. The effective total polyphenols diffusivity is estimated to be between 8.333 × 10^-12 to 1.000 × 10^-11 m²·s^-1 with minimum mean residual squares. It is three orders of magnitude less than the estimated moisture diffusivity because of the larger polyphenols molecules. The estimated polyphenols diffusivity is very close to those published in the literature for sorption and ultrafiltration processes.     

Mathematical determination of feeding patterns and its consequence on correlational studies

The cell cycle regulatory proteins, which include cyclin-dependent kinases (cdks), cdk inhibitors (CKIs), cyclins, and the pRB, and E2F families of proteins, constitute a network of interacting factors which govern exit from or passage through the mammalian cell cycle. While the proteins within these families have similar structural characteristics, each family member exhibits distinct expression patterns during embryogenesis and distinct biological activities. In order to begin to understand the tissue-specific roles of these interacting factors, we determined the expression pattern and activity of the pRB, E2F, cyclin, cdk, and CKI families of cell cycle regulatory proteins during retinoic acid-induced (neuronal pathway) and DMSO-induced (cardiac muscle pathway) differentiation of the pluripotent murine embryonal carcinoma cell line, P19. We demonstrate here that P19 terminal differentiation causes lineage-specific changes in the expression and activity of distinct members of the E2F, pRB, cyclin, and CKI families. Furthermore, dynamic changes in the activities of these cell cycle regulatory proteins occur through several overlapping mechanisms, culminating in repression of DNA-binding activity by all of the E2F family members as cells terminally differentiate.     

Degradation study on ternary zinc magnesium phosphate glasses

Glasses with composition (ZnO)₃₀(MgO) _x (P₂O₅)_70−x (x = 5, 8, 10, 13, 15, 18, and 20 mol.%) have been successfully prepared by the melt-quenching technique. Degradation study has been carried out by means of measuring their chemical durability against buffer solutions with initial pH values of 4.01, 7.00, and 10.01 at an ambient temperature for up to 30 days. The dissolution rate (D _R) was obtained by calculating the measured weight loss of the glasses per unit surface area per unit immersion time. The results show that the glasses have better corrosion resistance in basic solution. It was also found that the weight loss is related to the MgO concentration with lower P₂O₅ concentration exhibiting greater corrosion resistance irrespective of acidic, neutral, or basic solutions as immersion liquid. All the sample surfaces and edges were corroded and the solutions experienced a decrease in pH values during the duration of the corrosion test.     

Manufacture of stainless steel edge filters: an application of electrolytic photopolishing

Electrolytic photopolishing of AISI 304 stainless steel has been used, together with conventional photochemical machining techniques, to produce an edge filter with a surface texture value of 0.065 μm (R_a)     

Surface textures and process characteristics of the electrolytic photoetching of annealed AISI 304 stainless steel in hydrochloric acid

Electrolytic photoetching of AISI 304 stainless steel surfaces in 10% (w/w) hydrochloric acid has been studied. A surface texture value of 1.35 μm ($\text{R}{}_{\mathrm{a}}$) has been measured for a commercially acceptable rate of etch (10 μm/min). Comparisons of this etching system with FeCl₃-HCl-H₂O spray systems used in conventional photochemical machining have also been made     

Low Temperature Hall Effect Investigation of Conducting Polymer-Carbon Nanotubes Composite Network

Polypyrrole (PPy) and polypyrrole-carboxylic functionalized multi wall carbon nanotube composites (PPy/f-MWCNT) were synthesized by in situ chemical oxidative polymerization of pyrrole on the carbon nanotubes (CNTs). The structure of the resulting complex nanotubes was characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The effects of f-MWCNT concentration on the electrical properties of the resulting composites were studied at temperatures between 100 K and 300 K. The Hall mobility and Hall coefficient of PPy and PPy/f-MWCNT composite samples with different concentrations of f-MWCNT were measured using the van der Pauw technique. The mobility decreased slightly with increasing temperature, while the conductivity was dominated by the gradually increasing carrier density.     

PARAMETER ESTIMATION OF FICK'S LAW DRYING EQUATION

ABSTRACT

Distributed parameter drying models such as the Fick's law diffusion model, unlike the lumped parameter model of van Meel whose parameters can be easily estimated by regression, suffer from the difficulty in estimating the parameters of the models quantitatively with accuracy. In the past they were estimated by visual inspection of the theoretical drying curves which fit the experimental drying curve best In this work, a quantitative parameter estimation technique originally suggested by Chavent, is developed by minimizing the integrated squares of error between theoretical and experimental curves over the drying lime (the criterion) subjected to the constraints that the theoretical curve is governed by the constant diffusivity Fick's taw diffusion equation (the constraint). Although the estimation of Fick's law constant diffusivity can be done by using the analytical solution developed by Crank, the use of the Fick's law model here is simply to demonstrate the utility of the proposed technique which can be used in more complex distributed models. The optimization problem is to solve for the adjoint equation for which the value of the Fick's law diffusivity minimizes the criterion. The Lagrangian derivative is solved by using a discrete derivative of the criterion. The theoretical curves are generated by using simple explicit (FSE) and modified Crank-Nicholson (FCR) algorithms The drying of oil palm kernels are used as a case study. Ii is found that the estimated diffusivities of moisture in oil palm kernels range from 0 5 to 5.0 × 10^-10 m²sol;s which are comparable with published data. It is also found that the estimated diffusivity is dependent on the initial moisture content.     

Single Phase Flow Pressure Drop in Glass Ballotini Particulate Beds

A study was made of pressure drop during single fluid phase flow to determine the pressure drop characteristic of the porous media (glass ballotini particulate beds) for coalescence. It is also served to check the reproducibility of the packing technique, and to detect any foreign particulate matter or re-arrangement of the individual particles in the coalesce bed. Furthermore these data provided a basis for comparison with that during two-phase flow with coalescence. For spherical particle the modified Carman-Kozeny equation was applied; the commonly accepted value for Kozeny constant is 5.0. However, K, depends on, among other factors, the structure of the bed, voidage fraction, particle shape, tortuosity, superficial velocity, bed depth, particle size, and wall effect.     

Task difficulty, risk, effort and comfort in a simulated driving task—Implications for Risk Allostasis Theory

Risk Allostasis Theory states that drivers seek to maintain a feeling of risk within a preferred range [Fuller, R., 2008. What drives the driver? Surface tensions and hidden consensus. In: Keynote at the 4th International Conference on Traffic and Transport Psychology, Washington, DC, August 31–September 4, 2008]. Risk Allostasis Theory is the latest version of Task-Difficulty Homeostasis theory, and is in part based on the findings of experiments where participants were asked to rate the task difficulty, feeling of risk and chance of collision of scenes shown in digitally altered video clips [Fuller, R., McHugh, C., Pender, S., 2008b. Task difficulty and risk in the determination of driver behaviour. Revue européenne de psychologie appliqée 58, 13–21].The focus of the current research was to expand upon the previous video based experiments using a driving simulator. This allowed participants to be in control of the vehicle rather than acting as passive observers, as well as providing additional speed cues. The results support previous findings that ratings of task difficulty and feeling of risk are related, and that they are also highly related to ratings of effort and moderately related to ratings of comfort and habit. However, the linearly increasing trend for task difficulty and feeling of risk described by the previous research was not observed: instead the findings of this experiment support a threshold effect where ratings of risk (feeling of and chance of loss of control/collision), difficulty, effort, and comfort go through a period of stability and only start to increase once a certain threshold has been crossed. It is within the period of stability where subjective experience of risk and difficulty is low, or absent, that drivers generally prefer to operate.