A Low-Supply-Voltage CMOS Sub-Bandgap Reference

A low-power (21 $muhbox{W}$ ) bandgap reference source that is operable from a nominal supply voltage of 1.4 V is described. The circuit provides an output voltage equal to the bandgap voltage having a low output resistance and allows resistive loading. It does not use resistors or operational amplifiers. Thus, the design is suitable for fabrication in any digital CMOS technology. The circuit uses a current conveyor and current mirrors to convert the proportional to absolute temperature voltage into a current using a MOSFET. The current is converted back to a voltage by using the functional inverse of the FET $v-i$ characteristics. This makes the voltage gain linear and temperature independent. The absence of back-gate bias is the reason for achieving the low supply voltage of operation. Simulation results using the transistor models for the 0.18-$mu$m TSMC process show that the voltage-variation over the temperature range 0 to 100 $^{circ} {hbox {C}}$ is $≪$1 mV.      

Catalytic reduction of N2O with CH4 and C3H6 over Ag–Rh/Al2O3 bimetallic catalyst in the presence of oxygen

A study of nitrous oxide (N₂O) reduction with methane (CH₄) and propene (C₃H₆) in the presence of oxygen (5%) over Ag/Al₂O₃, Rh/Al₂O₃ and Ag–Rh/Al₂O₃ catalysts, with Ag and Rh loadings of 5 wt% and 0.05 wt% respectively, has been performed. From the results, it was observed that the Ag–Rh bimetallic catalyst was the most active for both nitrous oxide removal (more than 95%) and hydrocarbon oxidation. This high activity seems to be connected with a synergistic effect between Ag and Rh. The findings from X‐ray diffraction and X‐ray photoelectron spectroscopy studies showed also, that there were no strong interactions (eg alloying) between Ag and Rh. Copyright © 2005 Society of Chemical Industry     

An antinociceptive effect of the intraperitoneal injection of nifedipine in rats, measured by tail-flick test

The tail-flick (TF) technique was used to assess the antinociceptive properties of nifedipine (NIF) given intraperitoneally (i.p.). First, the most suitable intensity of the noxious stimulus (temperature of the bulb) has been ascertained and used in the main study. Male Sprague-Dawley rats received NIF, dissolved in dimethyl sulfoxide (DMSO) at the doses of 0.0, 0.5, 2, 5, 10 and 15 mg/kg, or control with no injection. For the main study, the noxious stimulus was limited to 15 sec (cut-off time) and TF latencies were recorded up to 120 min. The antinociceptive response was expressed as the area under the curve for each rat and analyzed by one-way ANOVA. The antinociceptive response to the lower doses of NIF (0.5 and 2 mg/kg) did not differ from control (no injection) and DMSO alone. Significance was found at 5, 10 and 15 mg NIF with no difference among the doses. However, there was an increasing tendency of the mean values from 0.5 to 15 mg NIF resulting in a positive correlation. The correlation coefficient was 0.32483 (p = 0.015) and regression equation Y = (19.37) x dose + 1320. Our data suggest that spinal mechanisms are involved in NIF-induced antinociception.     

Low-temperature CV dispersion in MOS devices

A study is reported of the dispersion seen in the accumulation and depletion regions, of the C-V curve in n-channel MOS devices in the temperature range 30-45 K. It is concluded that the dispersion observed in these experiments is caused by time-constant effects, due to the substrate resistance and not caused by dopant atom emission time constant effects. From the measured admittance as a function of temperature and frequency, the acceptor energy level is determined to within ±0.4 meV     

Evaluation of hot hardness and creep of a 350 grade commercial maraging steel

The hardening response and the indentation creep of a 350 grade commercial maraging steel were evaluated using a hot hardness tester. The hardness versus temperature plot exhibited three distinct regions. Hardness response was noted between 500–800 K. The unusually high values of activation energy and stress exponent obtained during the creep experiment could be rationalized by a novel concept of introducing a back stress term in the indentation creep relation. The corrected value of the activation energy was found to be reasonably in agreement with the activation energy for diffusion of Ni in iron. Results are supplemented with microstructural observation.     

Surface properties of ZSM-5 modified by phosphorus

Phosphorus modification of ZSM-5 leads to extra framework P⁵⁺ and probably incorporation of +3 valence state of P in the framework. The resulting system has increased Brønsted acidity. Theoretical calculations also favour the postulate that phosphorus in +3 valence state can be incorporated into the lattice.     

Disorder in cellulosic fibers

Ruland's concept of an isotropic disorder function is applied to estimate the disorder parameter and the degree of crystallinity in a few cellulosic fibers: two cottons, native ramie, and a high-tenacity rayon. The results indicate an increase in disorder without any change in crystallinity on mercerization of native celluloses. On hydrolysis, with or without a pretreatment of mercerization, the samples exhibit a higher crystallinity, disorder remaining the same as for native celluloses. A ball-milled sample of “amorphous” cellulose is still found to be fairly crystalline with the lowest disorder. On being wetted in water and oven-dried, a distorted form of cellulose II with higher crystallinity and disorder was obtained. The polynosic fiber, Tufcel, has low values for the degree of crystallinity, disorder parameter, as well as crystallite dimension. A strong dependence of the degree of crystallinity on the crystallite size, particularly the lateral, is observed.     

INVISCID LIQUID CIRCULATION IN BUBBLE COLUMNS

For circulation in axi-symmetric (cylindrical) bubble columns, the recently developed mathematical model^25,26 has been used along with the criterion of minimum circulation strength to determine the height of each circulation cell in a tall column. This is then used to derive a theoretical expression, first of its kind, for gas hold-up inside a bubble column. The predictions of this equation as well as the equation derived here for axial liquid velocity at column axis have been compared with available data and the comparison is found to be excellent for both the variables. An explicit relation is derived for the average liquid circulation velocity. The model is also used to derive an expression for liquid axial dispersion coefficient which compares almost exactly with Deckwer et al.'s⁴ correlation.

For circulation in two-dimensional bubble columns a new mathematical model is developed. The predictions of bubble envelope shape and bubble envelope area compare well with published data. The predictions of number of circulation cells in the horizontal direction also compare well with published data.     

Parallelization of a dynamic SVD clustering algorithm and its application in information retrieval

We describe an implementation of a parallel document clustering scheme based on latent semantic indexing, which uses singular value decomposition. Given a set of documents, the clustering algorithm is dynamic in the sense that it automatically infers the number of clusters to be output. The parallel version has been implemented on a LAN and on a dual‐core system. Experimental evaluation of the algorithm shows an average speed‐up of 6.22 for the LAN implementation and an average speed‐up of 3.71 for the dual‐core implementation, while still maintaining a precision and recall in the range [0.85, 1]. To put these implementations in the context of information retrieval, we use the parallel clustering algorithm and develop a document similarity search system. The similarity search system shows good performance in terms of precision and recall. Copyright © 2010 John Wiley & Sons, Ltd.     

Some problems of the moral and psychological training of medical service personnel

The authors' experience with 45 papillosphincterotomies, performed for diseases of bile passages and chronic pancreatitis, is reported. The details of the operative technic, employed by the authors, are described. The technic of papillosphincterotomy on a conus-shape sound by means of a "laser scalpel" proved to be the most perfect one. Careful observation of the surgical technic made it possible to gain favourable results--only 1 of 45 operated patients died. Papillosphincterotomy is largely advocated in stenoses and concretions in the large duodenal papilla, strictures of choledocho-duodenoanastomoses, care should be taken not to overwiden indications to the operation concerned.