A new monitoring system for piping systems in fossil fired power plants

A CEC-funded project has been performed to tackle the problem of producing an advanced Life Monitoring System (LMS) which would calculate the creep and fatigue damage experienced by high temperature pipework components. Four areas were identified where existing Life Monitoring System technology could be improved:

1. 1. the inclusion of creep relaxation

2. 2. the inclusion of external loads on components

3. 3. a more accurate method of calculating thermal stresses due to temperature transients

4. 4. the inclusion of high cycle fatigue terms.

The creep relaxation problem was solved using stress reduction factors in an analytical in-elastic stress calculation. The stress reduction factors were produced for a number of common geometries and materials by means of non-linear finite element analysis. External loads were catered for by producing influence coefficients from in-elastic analysis of the particular piping system and using them to calculate bending moments at critical positions on the pipework from load and displacement measurements made at the convenient points at the pipework. The thermal stress problem was solved by producing a completely new solution based on Green's Function and Fast Fourier transforms. This allowed the thermal stress in a complex component to be calculated from simple non-intrusive thermocouple measurements made on the outside of the component. The high-cycle fatigue problem was dealt with precalculating the fatigue damage associated with standard transients and adding this damage to cumulative total when a transient occurred.

The site testing provided good practical experience and showed up problems which would not otherwise have been detected.     

Simulation of magnetic component models in electric circuitsincluding dynamic thermal effects

It is essential in the simulation of power electronics applications to model magnetic components accurately. In addition to modeling the nonlinear hysteresis behavior, eddy currents and winding losses must be included to provide a realistic model. In practice the losses in magnetic components give rise to significant temperature increases which can lead to major changes in the component behavior. In this paper a model of magnetic components is presented which integrates a nonlinear model of hysteresis, electro-magnetic windings and thermal behavior in a single model for use in circuit simulation of power electronics systems. Measurements and simulations are presented which demonstrate the accuracy of the approach for the electrical, magnetic and thermal domains across a variety of operating conditions, including static thermal conditions and dynamic self heating     

Computer support for strategic organizational decision-making

While information systems continue to be promoted within organizations as tools to support strategic decision-making, there is growing concern over the ability of such systems to model the social and political complexity of the situations to which they are being applied. This paper examines the nature of organizational decision-making and the use of computer-based systems to support this activity. The debate queries the extent to which such artifacts should be allowed to become enmeshed and embedded within the strategic decision-making activities of organizations which operate within increasingly complex environments.     

Experimental fetal tracheal ligation reverses the structural and physiological effects of pulmonary hypoplasia in congenital diaphragmatic hernia

Infants with congenital diaphragmatic hernia (DH) and profound pulmonary hypoplasia are currently unsalvageable. The authors previously demonstrated that tracheal ligation (TL) accelerates fetal lung growth and reverses the pulmonary hypoplasia of fetal nephrectomy. The purpose of this study was to determine if the pulmonary hypoplasia of experimental DH could be similarly reversed and, if so, whether the resulting lungs would show better function than those of their DH counterparts. Eighteen fetal lambs were divided into three experimental groups of six animals each. In group 1, DH was created at 90 days' gestation. In group 2, DH was created at 90 days' gestation and TL performed during the same operation. Group 3 consisted of sham-operated controls. These animals were delivered near full-term, and their lungs analyzed by standard morphometric techniques. Ten additional fetal lambs were divided into two experimental groups of five animals each. In group 4, DH was created at 90 days' gestation. In group 5, DH was created at 90 days' gestation and TL performed 20 days later, at 110 days' gestation. These animals were pressure-ventilated via tracheostomy over a 2-hour period in which PaO2, PaCO2, and compliance were measured. Intratracheal pressure (ITP) was measured at the time of delivery in all groups. Upon retrieval, DH animals had abdominal viscera in the chest and small lungs; in contrast, DH/TL animals had the herniated viscera reduced from the chest by enlarged lungs. DH/TL lungs showed markedly increased growth, with significant increases in lung volume:body weight ratio (LV:BW; P = .0001), alveolar surface area (ALV.SA; P = .0001), and alveolar number (ALV#) (P = .0001) when compared with those of the DH or control group. This growth was associated with a normal maturation pattern based on histological appearance, normal airspace fraction, and normal alveolar numerical density. ITP in the DH/TL group was increased when compared with that of DH and control animals (P = .0001). Total lung DNA and protein were both elevated in the DH/TL animals (P = .0001). However, the DNA:protein ratio remained normal, suggesting lung growth had occurred through cell proliferation, not by hypertrophy. When ventilated over a range of settings, DH/TL lungs were more compliant (P = .0001) and achieved higher PaO2s (P < .003) and lower PaCO2s (P = .0001) than their DH counterparts. From these data, the authors conclude: (1) Experimental fetal DH produces hypoplastic lungs that are not capable of adequate gas exchange with conventional ventilation.(ABSTRACT TRUNCATED AT 400 WORDS)     

Resurgence of derived stimulus relations

Resurgence has been shown in human and nonhuman operant behavior, but not in derived relational responses. The present study examined this issue. Twenty-three undergraduates were trained to make conditional discriminations in a three-choice matching-to-sample paradigm. The training resulted in three equivalence classes, each consisting of four arbitrarily configured visual stimuli. The same 12 stimuli were then reorganized, and the conditional discrimination training was repeated such that three new classes were possible. In a subsequent test of derived relations, most subjects showed response patterns that were consistent with the altered conditional discriminations. Subjects were then exposed to conditional discrimination trials under extinction. Most subjects continued to respond consistently with the most recently reinforced conditional discrimination trials. During the next phase, subjects were exposed to symmetry and equivalence trials. Responses consistent with the most recent training produced feedback saying that the responses were incorrect, whereas other responses produced no feedback. Most subjects showed a resurgence of responding that was consistent with their earlier training. Finally, subjects were exposed to conditional discrimination trials carried out in extinction. Most subjects continued to show a resurgence of responding that was consistent with their early training.     

An investigation into the performance and cost effectiveness of thermosyphon solar water heaters

In this paper, the TRNSYS Simulation Program is used to investigate the monthly and annual solar fraction of a Thermosyphon Solar Water Heater and to evaluate its economic viability in terms of its life cycle savings over a conventional water heating system. The results of the simulation indicate that the yearly solar contribution of the system ranges from 63% for a high hot water consumption profile to 89% for a low consumption pattern. The payback period of the system is as low as 3 years when compared to electric water heating systems. As long as the competitor is diesel oil, the payback period increases to 7–9 years, depending on the hot water consumption profile used.     

A wavelet-based procedure for process fault detection

To detect faults in a time-dependent process, we apply a discrete wavelet transform (DWT) to several independently replicated data sets generated by that process. The DWT can capture irregular data patterns such as sharp "jumps" better than the Fourier transform and standard statistical procedures without adding much computational complexity. Our wavelet coefficient selection method effectively balances model parsimony against data reconstruction error. The few selected wavelet coefficients serve as the "reduced-size" data set to facilitate an efficient decision-making method in situations with potentially large-volume data sets. We develop a general procedure to detect process faults based on differences between the reduced-size data sets obtained from the nominal (in-control) process and from a new instance of the target process that must be tested for an out-of-control condition. The distribution of the test statistic is constructed first using normal distribution theory and then with a new resampling procedure called "reversed jackknifing" that does not require any restrictive distributional assumptions. A Monte Carlo study demonstrates the effectiveness of these procedures. Our methods successfully detect process faults for quadrupole mass spectrometry samples collected from a rapid thermal chemical vapor deposition process     

Development and characterization of magnetorheological polymer gels

Magnetorheological materials have been used in many applications in recent years. To develop new materials, polyurethane and silicone polymer gels were investigated. Rheology is qualitatively controlled for each system by controlling the concentration of reactants and diluents. The resulting polymers have solid, gel, or liquid states, depending on the crosslinking and dilution. The gels were characterized through kinetic analysis. Differential scanning calorimetry (DSC) was used with analysis methods to find the kinetic properties for diluted and undiluted polyurethane systems. Heat of reaction, order of reaction, preexponential constant, and activation energy were obtained from the experimental DSC data. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2733–2742, 2002