Analysis of bone loss with aging and menopause--using digital image processing

To study bone loss relationships to aging and menopause, cross-sectional bone mass measurements by digital image processing (DIP method), and menopause information collected by questionnaire, were analyzed on 291 women who live in Tsukude village. The results are as follows. 1) The mean DIP values (sigma GS/D, MCI) by age-stratified groups decrease with age after menopause. The rate of bone loss in sigma GS/D is almost constant, but in MCI it increases with aging. 2) In 30-year old and 40-year old age groups, the frequency distribution of DIP values is symmetrical and bell-shaped. But after the fifties the distribution is asymmetrical, with the mode of distribution deviated toward low bone mass. The change of mode with aging is larger than that of mean. This fact suggests that change of mean bone mass substantially underestimates actual bone loss from aging. 3) The change of the mean DIP values stratified by years elapsed since menopause is not especially large at start of menopause but becomes almost constant after menopause. DIP values reflect the bone loss from the aging rather than from menopause, and are beneficial to the study of bone loss in elderly women.     

Dietary effect of a symmetrical triacylglycerol, 1,3-biseicosapentaenoyl-2-γ-linolenoyl glycerol, on fatty acid composition of guinea pigs

The dietary effect of 1,3-biseicosapentaenoyl-2-γ-linolenoyl glycerol (STG) on the fatty acid composition of guinea pigs was examined and compared with that of an eicosapentaenoic acid ethyl ester (EPA-F) and of a soybean oil (SBO) diet. In terms of content of plasma lipid, EPA-E had a greater hypolipidemic effect than STG. On the other hand, in terms of EPA incorporation, contents of EPA in liver lipid were almost the same in the STG and EPA-E groups. Considering that the amount of EPA administered in the EPA-E group was almost 1.5 times that of the STG group, FPA may be absorbed more effectively as the glycerol ester than as the ethyl ester in guinea pigs. In all the tissue lipids, the STG group had a higher unsaturation index (UI) than the EPA-E group even though there is a lower UI in the STG diet than the EPA-E diet. These results suggest that greater amounts of desaturase products as a whole were synthesized in the STG group than in the other two groups. The dihomo-γ-linolenic acid/arachidonic acid (DGLA/AA) ratio in plasma total lipids in the STG group was 3.5 times that of SBO group, and the DGLA/AA ratio in the EPA-E group was half that of the SBO group. In liver lipid, the ratios of DGLA/AA and EPA/AA in the STG group were 0.687 and 0.488 (phosphatidylcholine fraction) and 0.237 and 0.752 (phosphatidylethanolamine fraction), respectively. The ratio of DGLA/AA as well as the high EPA/AA ratio obtained in the present study with the STG diet may lead to physiological alterations, including enhanced synthesis of 1-and 3-series eicosanoids.     

Comparisons of optimal release policies for software systems

In a software product management, it is an important problem to determine the optimal release timing which minimizes the total expected cost incurred in both testing and operation phases. In this paper, we compare the performance between two kinds of software release methods, which are referred to as the T-policy and the N-policy. Based on the existing software reliability growth models, we formulate the expected cost functions and derive analytically the optimal policies under these control methods. Also, we derive a criterion for which control methods should be adopted. Finally, in numerical examples, we calculate the optimal release policies for several cost parameters.     

SOFL: a formal engineering methodology for industrial applications

Formal methods have yet to achieve wide industrial acceptance for several reasons. They are not well integrated into established industrial software processes, their application requires significant abstraction and mathematical skills, and existing tools do not satisfactorily support the entire formal software development process. We have proposed a language called SOFL (Structured-Object-based-formal Language) and a SOFL methodology for system development that attempts to address these problems using an integration of formal methods, structured methods and object oriented methodology. Construction of a system uses structured methods in requirements analysis and specifications, and an object based methodology during design and implementation stages, with formal methods applied throughout the development in a manner that best suits their capabilities. The paper describes the SOFL methodology, which introduces some substantial changes from current formal methods practice. A comprehensive, practical case study of an actual industrial Residential Suites Management System illustrates how SOFL is used     

Numerical simulation of deflecting flow in a symmetric enlarged channel

Numerical results of three-dimensional separated flow and heat transfer in a rectangular channel with a suddenexpansion are presented in this paper.Numerical simulations of Navier-Stokes and energy equations are carriedout using the finite difference method.The results of three-dimensional calculations are compared with thetwo-dimensional ones,and effects of the aspect ratio of channel upon the flow are shown.The transition fromsymmetric to asymmetric flow appears at lower Reynolds number as increasing the aspect ratio.The details oflocal heat transfer characteristics in two different separated flow regions on two downstream walls are clarified.Two-dimensionality of the flow and heat transfer almost disappears for the aspect ratio considered.     

Self‐consistent electrical parameter extraction from bias dependent spectral response measurements of III‐V multi‐junction solar cells

Spectral response of multi‐junction solar cell is complicated because of the interplay between external measurement conditions such as bias light intensity, monochromatic light intensity, bias voltage, and intrinsic electrical properties of series interconnected subcells. In this paper, we report an experimental study on the bias voltage‐dependent spectral response (SR) for multi‐junction solar cell. A self‐consistent iteration loop was developed from a nonlinear least square Powell hybrid algorithm that was used for curve fitting the experimental SR versus bias voltage data of each subcell. We demonstrated for the first time that this approach enabled us to derive the electrical parameters such as dark saturation currents (J₀), shunt resistance (R_sh), series resistance (R_s), and spectra response (J_photo) for each subcell of a Ga_0.99In_0.01As/Ge dual junction solar cell with stable convergence. The accuracies of the fitting results were confirmed by the agreement between the J–V curves calculated on the basis of these parameters and the experimental J–V curve of multi‐junction solar cell measured under AM1.5 and 1 sun condition. Copyright © 2013 John Wiley & Sons, Ltd.     

Determination and confirmation of five phenolic antioxidants in foods by LC/MS and GC/MS

Identification and determination of butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT), nordihydroguaiaretic acid (NDGA), propyl gallate (PG) and tert-butylhydroquinone (TBHQ) by means of LC/MS and GC/MS were examined. These five phenolic antioxidants were detected as their pseudo-molecular ions [M-H]- by LC/MS using a Shim-pack FC-ODS column with drying gas. Moreover, BHA, BHT and TBHQ were detected based on their mass fragment ions by GC/MS. Decomposition of TBHQ, NDGA and PG during analysis could be prevented by the addition of L-ascorbic acid (AsA) to the extraction solvent. All five antioxidants were extracted from nikuman, olive oils, peanut butter, pasta sauce and chewing gum with a mixture of acetonitrile-2-propanol-ethanol (2:1:1) containing 0.1% AsA (AsA mixture), which had been cooled in a freezer and filtered. One part filtrate and 5 parts water were mixed and placed on a Mega-Bond Elut C18 cartridge, except in the case of chewing gum. Lipids in foods were removed on a C18 cartridge by washing with 5 mL of 5% acetic acid, and antioxidants were eluted with 5 mL of AsA mixture. The antioxidants spiked into nikuman, olive oil, peanut butter, pasta sauce and chewing gum were successfully identified and their concentrations determined by LC/MS, and GC/MS with good recoveries.     

Broad distribution of enterotoxin genes (hblCDA, nheABC, cytK, and entFM) among Bacillus thuringiensis and Bacillus cereus as shown by novel primers

Eight new pairs of PCR primers were designed and efficiently detect eight toxin genes (hblC, hblD, hblA, nheA, nheB, nheC, cytK, and entFM) in 411 B. cereus strains (121 food- and 290 soil isolates) and 205 B. thuringiensis strains (43 serovars, 10 food- and 152 soil isolates). According to the presence of these eight toxin genes, they were divided into four groups among the total 616 isolates. In Group I, all eight genes occurred simultaneously in 403 (65.42%) isolates, while Group II (134 isolates or 21.75%) and Group III (46 isolates or 7.47%) were devoid of hblCDA and cytK, respectively. In Group IV, there were thirty-three isolates which lacked both hblCDA and cytK. The presence of hblCDA in B. thuringiensis strains (86.80%) was significantly higher (P<0.05) than in B. cereus strains (66.18%) whereas no significant difference in nheABC, cytK and entFM occurrence was detected between both bacterial groups. Both nheABC and entFM genes were found in all B. cereus and B. thuringiensis strains (616 strains in total), while the cytK gene could be detected in 365 (88.80%) of the B. cereus and 172 (83.90%) of the B. thuringiensis strains. None of the 616 tested strains showed the presence of only a single or two genes in either the hbl or nhe operons. The eight primer pairs designed for this multiplex PCR allowed rapid detection of eight toxin genes from boiled cells with high sensitivity, gave 100% reproducibility, and did not cross-react to 32 other bacterial strains.     

Intelligent tutoring system for electric circuit exercising

An intelligent tutoring system called Circuit Exerciser is described. The system is designed to help university students learn more about electric circuits. It can formulate drill problems, solve them, and infer mistakes in a student's answer. It can also provide helpful comments to the students on how the mistake was made. The system shows the circuit of the presented problem on graphic displays and is student-friendly. The system architecture, pedagogical cycle, and execution of the system are presented