The role of numerical simulation for the development of an advanced HIFU system

High-intensity focused ultrasound (HIFU) has been used clinically and is under clinical trials to treat various diseases. An advanced HIFU system employs ultrasound techniques for guidance during HIFU treatment instead of magnetic resonance imaging in current HIFU systems. A HIFU beam imaging for monitoring the HIFU beam and a localized motion imaging for treatment validation of tissue are introduced briefly as the real-time ultrasound monitoring techniques. Numerical simulations have a great impact on the development of real-time ultrasound monitoring as well as the improvement of the safety and efficacy of treatment in advanced HIFU systems. A HIFU simulator was developed to reproduce ultrasound propagation through the body in consideration of the elasticity of tissue, and was validated by comparison with in vitro experiments in which the ultrasound emitted from the phased-array transducer propagates through the acrylic plate acting as a bone phantom. As the result, the defocus and distortion of the ultrasound propagating through the acrylic plate in the simulation quantitatively agree with that in the experimental results. Therefore, the HIFU simulator accurately reproduces the ultrasound propagation through the medium whose shape and physical properties are well known. In addition, it is experimentally confirmed that simulation-assisted focus control of the phased-array transducer enables efficient assignment of the focus to the target. Simulation-assisted focus control can contribute to design of transducers and treatment planning.     

Spiral column configuration for protein separation by high-speed countercurrent chromatography

Retention of the stationary phase of aqueous–aqueous polymer phase systems is improved by a spiral column configuration which utilizes the radially acting centrifugal force along the spiral pitch to retain the heavier phase in the outer portion and the lighter phase in the inner portion of the spiral channel. For the separation of proteins which has low mass transfer rates, the system needs further modification of the separation channel to interrupt the laminar flow and enhance mixing of the two phases.     

Small PWRs using coated particle fuel for district heating, PFPWR50

It has been said that nuclear energy is an important option for especially developing countries to satisfy their increasing energy demand. However, it will be difficult to deploy first of a kind nuclear power plant in developing countries because extensive safety demonstration has to be conducted in industrialized countries. On the other hand, it will be essential to present rigid proof of reliable operational experience to develop proper understanding of the safety features of new reactor systems among the people around the demonstration plant sites. One of the ways to solve the issue is to integrate existing technologies supported by a great deal of data and experience into a new reactor design. Based on the consideration, a small-sized district heating reactor system based on the pressurized water reactor (PWR) technologies combined with the fuel concept of high temperature gas cooled reactors (HTGRs) has been studied. The purpose of the combination of these two existing concepts is to take the best advantages of both excellent operational experience of PWRs and the integrity of HTGR fuel, coated particle fuel, against fission products release even at high temperature. We expect that this approach will help create a breakthrough to the current stagnation of nuclear power deployment.     

X-ray absorption fine structure study on residue bromine in carbons with different degrees of graphitization

The structure of bromine residue compounds was investigated by X-ray absorption fine structure (XAFS) in order to interpret where and how bromine is present in carbons with different degrees of graphitization. The residue compounds can be classified into three groups, as obtained from X-ray absorption near edge structure (XANES) spectra and the values of the intramolecular distance r_Br–Br determined by extended X-ray absorption fine structure (EXAFS). In Group I, prepared from the host carbons heat treated at temperatures higher than 1900 °C, bromine exists in the interlayer space of graphite in the form of Br₂ molecules with interaction of the π electrons of graphite. In Group III, from carbon heat treated at 1000 °C, most of the bromine probably reacts with carbon atoms having a dangling bond or functional groups. For Group II, where the host carbons are heat treated at intermediate temperatures, it is likely that bromine exists in undeveloped defects with a unique electronic state.     

The Role of HECT-Type E3 Ligase in the Development of Cardiac Disease

Despite advances in medicine, cardiac disease remains an increasing health problem associated with a high mortality rate. Maladaptive cardiac remodeling, such as cardiac hypertrophy and fibrosis, is a risk factor for heart failure; therefore, it is critical to identify new therapeutic targets. Failing heart is reported to be associated with hyper-ubiquitylation and impairment of the ubiquitin–proteasome system, indicating an importance of ubiquitylation in the development of cardiac disease. Ubiquitylation is a post-translational modification that plays a pivotal role in protein function and degradation. In 1995, homologous to E6AP C-terminus (HECT) type E3 ligases were discovered. E3 ligases are key enzymes in ubiquitylation and are classified into three families: really interesting new genes (RING), HECT, and RING-between-RINGs (RBRs). Moreover, 28 HECT-type E3 ligases have been identified in human beings. It is well conserved in evolution and is characterized by the direct attachment of ubiquitin to substrates. HECT-type E3 ligase is reported to be involved in a wide range of human diseases and health. The role of HECT-type E3 ligases in the development of cardiac diseases has been uncovered in the last decade. There are only a few review articles summarizing recent advancements regarding HECT-type E3 ligase in the field of cardiac disease. This study focused on cardiac remodeling and described the role of HECT-type E3 ligases in the development of cardiac disease. Moreover, this study revealed that the current knowledge could be exploited for the development of new clinical therapies.     

Synthesis and Sintering of Cerium(II) Monosulfide

Cerium monosulfide (CeS) powder was synthesized by the reduction of Ce₂S₃ powder with metallic Ce, which was obtained from ceria (CeO₂) powder using carbon disulfide (CS₂) gas. To obtain the maximum amount of CeS from a mixture of Ce₂S₃ and Ce, an excess amount of metallic Ce, a stoichiometric composition, was necessary in the synthesis at 1273 K for 10.8 ks. The preliminary sintering experiments also were performed using a synthetic CeS powder containing a small amount of Ce, Ce₂O₂S, and β-Ce₂S₃ as impurities. It was found that the oxygen content in the sintered compact decreases gradually as the sintering temperature increases, because of the removal of the impurities due to the evaporation of the volatile CeO. Single-phase CeS was formed by sintering at 2173 K. To evaluate the activation energy for densification of single-phase CeS, a CeS powder was prepared by milling an initial sintered compact and was used as an ingredient for hot-press experiments. Densification data during hot-press sintering were analyzed using a kinetic equation, showing that boundary diffusion is a rate-limiting process. The results suggest that this boundary diffusion model can explain well the densification data, with an apparent activation energy of 479 kJ·mol^-1.     

Dielectric relaxation phenomenon of rare earth Nd3+ modified bismuth layer ferroelectric ceramics fabricated by plasma active sintering method

Abstract

The crystalline structure, dielectric relaxation and ferroelectric properties of the solid solution, Nd _x Bi_4-x Ti₃O₁₂ (NBIT) compound were measured. The Curie temperature of the NBIT ceramics was determined to be 490°C from dielectric measurements. The dielectric constant of the NBIT ceramics shows a small anisotropic property. Polarization switching was observed using a Sawyer-Tower circuit at 50 Hz. Remnant polarizations and coercive fields could not be confirmed since the hysteresis loops were not saturated. The large dielectric relaxation is observed in the frequency range between 100 kHz and 1 MHz.     

Preparation of polyunsaturated phospholipids by lipase-catalyzed transesterification

Transesterifications were investigated to determine a means for preparing polyunsaturated phospholipids simply from soy phospholipid, sardine oil, and two kinds of microbial lipases originating fromCandida cylindracea andRhizopus delemar. The optimum reaction conditions forCandida cylindracea lipase were: 4 g of sardine oil, 10 mL of water, 0.7 g of lipase, 10 mL of hexane, 48 hr of reaction time at 37°C for 3 g of soy phospholipid, for which the transesterification ratio reached approximately 45%. Recovery of phospholipid was low, because hydrolysis also occurred under these reaction conditions. However, hydrolysis could be suppressed by using glycerine instead of water, and the recovery of phospholipid increased to 47%, although the transesterification ratio was reduced to 32%. Rhizopus delemar lipase has 1,3-specificity for triglycerides, and the transesterification ratio was approximately 37% in the 1-position of phospholipid. The resulting phospholipid was rich in polyunsaturated fatty acids and linoleic acid, while the total percentage of polyunsaturated fatty acids incorporated was 18.4%. Therefore, polyunsaturated phospholipids can be prepared easily by transesterification of soy phospholipid with fish oil by means of commercial lipases.     

Usefulness of Permanent Power Fuse in Control Centers with Molded Case Circuit Breakers

The increase in electric power consumption in industry has led to the development of modern distribution systems such as control centers having high kVA ratings and high prospective fault current. In such a situation, the improvement of the system usefulness such as reliability and cost effectiveness is the essential requirement. An index is presented to evaluate the system usefulness using the cost effectiveness for fault protection in a system of given bank kVA. The index is estimated on four different system structures of control centers, including one which utilizes Permanent Power Fuses (PPF). It is presented that the PPF combined with molded case circuit breaker in main circuit effectively improves the cost effectiveness in control centers with high fault current. Operating principles of the PPF and the control center utilizing the PPF are briefly outlined.