Photostability of polyetherurethaneureas

Polyetherurethaneureas (PEUUs) were synthesised from polyethylene-glycols (PEGs) of molecular weight 400, 600 and 1000, 4,4′-diphenylmethanediisocyanate (MDI) and aliphatic diamine chain extenders, 1,3-propanediamine (PDA) and 1,6-hexanediamine (HDA). Polymer films were irradiated with 365 nm light at 293 K and the effects of polyether soft segment length and urea hard segment on photo-oxidative stability were studied by following the variation in weight-average molecular weight (M _w), gel formation and stress-strain properties. Changes in ultraviolet and infrared spectroscopy were monitored on photo-oxidation and hydroperoxide content determined. The soft segment length was increased by increasing the molecular weight of PEG from 400 to 1000 and hard segment structure was changed by variation of diamine. It was noted that the structure of urea and polyether soft segment length plays an important role in photostability of PEUUs. PDA chain extended PEUUs were more stable than HDA chain extended PEUUs.     

Spatial interest pixels (SIPs): useful low-level features of visual media data

Visual media data such as an image is the raw data representation for many important applications. Reducing the dimensionality of raw visual media data is desirable since high dimensionality degrades not only the effectiveness but also the efficiency of visual recognition algorithms. We present a comparative study on spatial interest pixels (SIPs), including eight-way (a novel SIP detector), Harris, and Lucas‐Kanade, whose extraction is considered as an important step in reducing the dimensionality of visual media data. With extensive case studies, we have shown the usefulness of SIPs as low-level features of visual media data. A class-preserving dimension reduction algorithm (using GSVD) is applied to further reduce the dimension of feature vectors based on SIPs. The experiments showed its superiority over PCA.

Searching for points-to analysis

The points-to analysis problem is to find the pointer relationships that could arise during program execution. Many points-to analysis algorithms exist, each making a particular trade off between cost of the analysis and precision of the results. In this paper, we show how points-to analysis algorithms can be defined as transformed versions of an exact algorithm. We present a set of program transformations over a general program model and use them to define some existing points-to analysis algorithms. Doing so makes explicit the approximations involved in these algorithms. We also show how the transformations can be used to define new points-to analysis algorithms. Our transformations are generic and may be useful in the design of other program analysis algorithms.     

Supersonic Nozzle Flow Simulations for Particle Coating Applications: Effects of Shockwaves,Nozzle Geometry,Ambient Pressure,and Substrate Location upon Flow Characteristics

Characteristics of supersonic flow are examined with specific regard to nano-particle thin-film coating. Effects of shockwaves, nozzle geometry, chamber pressure, and substrate location were studied computationally. Shockwaves are minimized to reduce fluctuations in flow properties at the discontinuities across diamond shock structures. Nozzle geometry was adjusted to ensure optimal expansion (i.e., P _exit = P _ambient), where shock formation was significantly reduced and flow kinetic energy maximized. When the ambient pressure was reduced from 1 to 0.01316 bar, the nozzle’s diverging angle must be increased to yield the optimum condition of minimized adversed effects. Beyond some critical distance, substrate location did not seem to be a sensitive parameter on flow characteristics when P _amb = 0.01316 bar; however, overly close proximity to the nozzle exit caused flow disturbances inside the nozzle, thereby adversely affecting coating gas flow.     

Effect of chromium on the mechanical properties of powder-processed Fe–0.45 wt.% P alloys

The present investigation shows the role of chromium in Fe–P binary and Fe–P–Cr ternary alloys. The compositions are characterized in terms of microstructure, porosity content, hardness and tensile properties. The alloys were made using a hot powder forging technique. In this process mild steel encapsulated powders were hot forged into slabs. Then the slabs were hot rolled and annealed to relieve the residual stresses. Densifications as high as 98.9% of theoretical density have been realized. Microstructures of these alloys consist of single-phase ferrite only. Both Fe–0.45P and Fe–0.45P–3Cr alloys showed very high strength. As forged and hot rolled Fe–0.45P alloy showed low elongation. It was observed that, the addition of Cr to Fe–P based alloys caused an increase in strength associated with the reduction in ductility. Alloys developed in the present investigation were capable of hot working to very thin gage of sheets and wires.     

Analysis of supercritical carbon dioxide extracts from cones and leaves of a Humulus lupulus L cultivar

Extracts obtained by supercritical carbon dioxide extraction of cones and leaves of hop (Humulus lupulus L) at different combinations of temperature and pressure were analysed for their α- and β-acids and volatiles, using HPLC and GC respectively. The yield and composition of the mixtures of bitter compounds from the cones were largely influenced by the temperature and pressure applied during the extraction. Bitter compounds could not be detected in the extracts from the leaves. The most important volatile components identified were β-myrcene, β-caryophyllene and α-humulene. The extraction parameters also influenced the composition of the mixture of volatiles from the cones and leaves, 40°C and 20.0 MPa being optimum for the extraction of both bitter compounds and volatiles, which are thought to be important for the aroma of beer.     

Junction Stability in Ion-Implanted Mercury Cadmium Telluride

Ion implantation into HgCdTe results in the production of Hg interstitials, which can be subsequently driven into the HgCdTe by an annealing process. This diffusive drive-in of the Hg interstitials fills vacancies and kicks out group I impurities and results in the formation of an n–p junction. In this work we report on the production of interstitials during baking subsequent to the ion implantation process. Various concentrations of metal vacancies were first introduced into mid-wavelength infrared (MWIR, 3 μm to 5 μm) HgCdTe by annealing under tellurium-saturated conditions at various temperatures. Baking subsequent to planar implantation of boron produced n–p junctions whose depths were measured by defect etching. The results were modeled using a simple diffusion limited model from a fixed surface concentration. The surface concentration was allowed to decrease exponentially to zero after a time, found to be of the order of ∼80 h to 150 h. Exhaustion of the interstitials sources produced by the implantation was nearly complete after ∼400 h. The total number of mercury interstitials produced was approximately 50% of the implant dosage.     

Thermoelectric Properties of Two-Phase PbTe with Indium Inclusions

The thermoelectric figure of merit (zT) can be increased by introduction of additional interfaces in the bulk to reduce the thermal conductivity. In this work, PbTe with a dispersed indium (In) phase was synthesized by a matrix encapsulation technique for different In concentrations. x-Ray diffraction analysis showed single-phase PbTe with In secondary phase. Rietveld analysis did not show In substitution at either the Pb or Te site, and this was further confirmed by room-temperature Raman data. Low-magnification (~1500×) scanning electron microscopy images showed micrometer-sized In dispersed throughout the PbTe matrix, while at high magnification (150,000×) an agglomeration of PbTe particles in the hot-pressed samples could be seen. The electrical resistivity (ρ) and Seebeck coefficient (S) were measured from 300 K to 723 K. Negative Seebeck values showed all the samples to be n-type. A systematic increase in resistivity and higher Seebeck coefficient values with increasing In content indicated the role of PbTe-In interfaces in the scattering of electrons. This was further confirmed by the thermal conductivity (κ), measured from 423 K to 723 K, where a greater reduction in the electronic as compared with the lattice contribution was found for In-added samples. It was found that, despite the high lattice mismatch at the PbTe-In interface, phonons were not scattered as effectively as electrons. The highest zT obtained was 0.78 at 723 K for the sample with the lowest In content.