AFM observation of polyethylene single crystals: selective handedness of screw dislocations in a chair type

The three-dimensional morphology of polyethylene single crystals grown from dilute solution has been examined by atomic force microscopy. Single crystals were deposited on a soft ground of aqueous solution of poly(vinyl alcohol) (PVA) to avoid the collapse of thin lamellar crystals with thickness of 10 nm. The observation of single crystals on dried PVA clarifies the morphology of a chair type crystal as well as well-known hollow pyramidal type. It has been confirmed that the screw dislocations in the chair type follow a selection rule of the handedness in a manner to relieve the distortion in the chair type.     

Characterization and electrochemical properties of CF4 plasma-treated boron-doped diamond surfaces

The effect of CF₄ plasma etching on diamond surfaces, with respect to treatment time, was investigated using scanning electron microscopy (SEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and electrochemical measurements. SEM observations and Raman spectra indicated an increase in surface roughening on a scale of 10–20 nm, and an increase in crystal defect density was apparent with treatment time in the range of 10 s to 30 min. In contrast, alteration of the diamond surface terminations from oxygen to fluorine was found to be rather rapid, with saturation of the F/C atomic ratio estimated from XPS analysis after treatment durations of 1 min and more. The redox kinetics of Fe(CN)₆^3−/4− was also found to be significantly modified after 10 s of CF₄ plasma treatment. This behavior shows that C–F terminations predominantly affect the redox kinetics compared to the effect on the surface roughness and crystal defects. The double-layer capacitance (C_dl) of the electrolyte/CF₄ plasma-treated boron-doped diamond interface was found to show a minimum value at 1 min of treatment. These results indicate that a short-duration CF₄ plasma treatment is effective for the fabrication of fluorine-terminated diamond surfaces without undesirable surface damage.     

Lateral habits ofn-alkane single crystals

The lateral crystal habits ofn-alkanes (n-C _n H_2n+2) have been observed just below the melting points by optical microscopy forn=18, 19, 20, 22, 24, 34, 44, 50 and 65. The shape of the crystals depends on the crystal phase: circular in the rotator phase, lenticular in phase C, and diamond in the low-temperature phase. The rounding of the lateral shape can be explained in terms of thermal roughening of the lateral faces in the disordered phases at high temperature.     

High-efficiency finishing process for metal mold by large-area electron beam irradiation

A new finishing process for metal molds by large-area electron beam (EB) irradiation is proposed in this study. In the large-area EB irradiation equipment used here, an EB with high-energy density is irradiated without focusing the beam, and so the EB with a maximum diameter of 60 mm can be used for melting or evaporating metal surface instantly. Experimental results show that the surface roughness decreases from 6 μmRz to less than 1 μmRz in just a few minutes under proper machining conditions. The corrosion resistance of metal mold surface also could be greatly improved by large-area EB irradiation. Furthermore, the surface roughness of tilting surface close to 90° could be well improved. Therefore, large-area EB irradiation method has a possibility to become a high-efficiency finishing process for metal molds.     

Integrated-optic device for a fibre laser Doppler velocimeter

We first demonstrate an integrated-optic device for a fibre laser Doppler velocimeter, which consists of a waveguide interferometer and a frequency shifter in z-propagation Ti-diffused LiNbO3. The device is also pigtailed with a single-mode fibre to pick up a Doppler-shifted signal. Using the fabricated device, the velocity of a moving object was successfully heterodyne-detected with a signal/noise ratio of 30dB.     

A novel therapeutic approach for rectal varices: a case report of rectal varices treated with double balloon-occluded embolotherapy

We present a patient with continuous melena, diagnosed as rectal varices bleeding. She had a history of esophageal varices, which was treated by endoscopic ligation therapy. Eight years after the treatment of esophageal varices, the continuous melena began. Colonoscopic examination showed that the melena was caused by rectal varices, which were so severe that they could not be treated by either endoscopic sclerotherapy or surgical devascularization. Taking into considering the overall risk of treating rectal varices, we chose the approach of double balloon-occluded embolotherapy (DBOE) with 5% ethanolamine oleate with iopamodol as a liquid embolic material. DBOE is one of the interventional radiology techniques (Morita et al., Acta Hepatol Jpn 1994;35:109-120), but in this case was a completely new and novel clinical procedure for rectal varices. After the DBOE therapy, the condition of rectal varices was markedly improved. Thus, DBOE might be a new tool for treating inoperable rectal varices.     

Characterization of internal oxide layers in 3% Si grain-oriented steel by electrochemical methods

The structure of internal oxide layers in decarburized sheet was studied using a newly developed electrochemical method. Dissolving potential profiles indicated the amount of fayalite (Fe₂SiO₄) and silica (SiO₂) in the layers. The quantitative data for the contents of fayalite and silica in the internal oxide layers can be easily obtained by this method.     

Refined mapping of a gene responsible for Fukuyama-type congenital muscular dystrophy: evidence for strong linkage disequilibrium

Fukuyama-type congenital muscular dystrophy (FCMD), the second most common form of childhood muscular dystrophy in Japan, is an autosomal recessive severe muscular dystrophy associated with an anomaly of the brain. After our initial mapping of the FCMD locus to chromosome 9q31-33, we further defined the locus within a region of approximately 5 cM between loci D9S127 and CA246, by homozygosity mapping in patients born to consanguineous marriages and by recombination analyses in other families. We also found evidence for strong linkage disequilibrium between FCMD and a polymorphic microsatellite marker, mfd220, which showed no recombination and a lod score of (Z) 17.49. A "111-bp" allele for the mfd220 locus was observed in 22 (34%) of 64 FCMD chromosomes, but it was present in only 1 of 120 normal chromosomes. This allelic association with FCMD was highly significant (chi 2 = 50.7; P < .0001). Hence, we suspect that the FCMD gene could lie within a few hundred kilobases of the mfd220 locus.     

An approach to the formation and growth of new phases with application to polymer crystallization: effect of finite size,metastability, and Ostwald's rule of stages

This article aims to link the mainstream subject of chain-folded polymer crystallization with the rather speciality field of extended-chain crystallization, the latter typified by the crystallization of polyethylene (PE) under pressure. Issues of wider generality are also raised for crystal growth, and beyond for phase transformations. The underlying new experimental material comprises the prominent role of metastable phases, specifically the mobile hexagonal phase in polyethylene which can arise in preference to the orthorhombic phase in the phase regime where the latter is the stable regime, and the recognition of thickening growth as a primary growth process, as opposed to the traditionally considered secondary process of thickening. The scheme relies on considerations of crystal size as a thermodynamic variable, namely on melting-point depression, which is, in general, different for different polymorphs. It is shown that under specifiable conditions phase stabilities can invert with size; that is a phase which is metastable for infinite size can become the stable phase when the crystal is sufficiently small. As applied to crystal growth, it follows that a crystal can appear and grow in a phase that is different from that in its state of ultimate stability, maintaining this in a metastable form when it may or may not transform into the ultimate stable state in the course of growth according to circumstances. For polymers this intermediate initial state is one with high-chain mobility capable of thickening growth which in turn ceases (or slows down) upon transformation, when and if such occurs, thus locking in a finite lamellar thickness. The complete situation can be represented by a P, T, 1/l (l crystal thickness) phase-stability diagram which, coupled with kinetic considerations, embodies all recognized modes of crystallization including chain-folded and extended-chain type ones. The task that remains is to assess which applies under given conditions of P and T. A numerical assessment of the most widely explored case of crystallization of PE under atmospheric pressure indicates that there is a strong likelihood (critically dependent on the choice of input parameters) that crystallization may proceed via a metastable, mobile, hexagonal phase, which is transiently stable at the smallest size where the crystal first appears, with potentially profound consequences for the current picture of such crystallization. Crystallization of PE from solution, however, would, by such computations, proceed directly into the final stage of stability, upholding the validity of the existing treatments of chain-folded crystallization. The above treatment, in its wider applicability, provides a previously unsuspected thermodynamic foundation of Ostwald's rule of stages by stating that phase transformation will always start with the phase (polymorph) which is stable down to the smallest size, irrespective of whether this is stable or metastable when fully grown. In the case where the phase transformation is nucleation controlled, a ready connection between the kinetic and thermodynamic considerations presents itself, including previously invoked kinetic explanations of the stage rule. To justify the statement that the crystal size can control the transformation between two polymorphs, a recent result on 1 -4-poly-trans-butadiene is invoked. Furthermore, phase-stability conditions for wedge-shaped geometries are considered, as raised by current experimental material on PE. It is found that inversion of phase stabilities (as compared to the conditions pertaining for parallel-sided systems) can arise, with consequences for our scheme of polymer crystallization and with wider implications for phase transformations in tapering spaces in general. In addition, in two of the Appendices two themes of overall generality (arising from present considerations for polymers) are developed analytically; namely, the competition of nucleation-controlled phase growth of polymorphs as a function of input parameters, and the effect of phase size on the triple point in phase diagrams. The latter case leads, inter alia to the recognition of previously unsuspected singularities, with consequences which are yet to be assessed.