Stability analysis of neutral systems with mixed delays

The stability of neutral systems with mixed delays is studied in this paper. A new discretized Lyapunov functional method is proposed. The method in this paper is less conservative than the existing ones and the results are very close to the analytical results. In addition, this method allows the coefficient matrix of the neutral term to have time-varying uncertainties.     

Investigating the influence of the counter Si-cell on the optoelectronic performance of high-efficiency monolithically perovskites/silicon tandem cells under various optical sources

Nowadays, tandem structures have become a valuable competitor to conventional silicon solar cells, especially for perovskite over silicon, as metal halides surpassed Si with tunable bandgaps, high absorption coefficient, low deposition, and preparation costs. This led to a remarkable enhancement in the overall efficiency of the whole cell and its characteristics. Consequently, this expands the usage of photovoltaic technology in various fields of applications not only under conventional light source spectrum in outdoor areas, i.e., AM1.5G, but also under artificial light sources found indoors with broadband intensity values, such as Internet of things (IoTs) applications to name a few. We introduce a numerical model to analyze perovskite/Si tandem cells (PSSTCs) using both crystalline silicon (c-Si) and hydrogenated amorphous silicon (a-Si:H) experimentally validated as base cells. All proposed layers have been studied with J-V characteristics and energy band diagrams under AM1.5G by using SCAPS-1D software version 3.7.7. Thereupon, the proposed architectures were tested under various artificial lighting spectra. The proposed structures of Li4Ti5O12/CsPbCl3/MAPbBr3/CH3NH3PbI3/Si recorded a maximum power conversion efficiency (PCE) of 25.25% for c-Si and 17.02% for a-Si:H, with nearly 7% enhancement concerning the Si bare cell in both cases.     

Combining temporal partitioning and temporal placement techniques for communication cost improvement

In this paper, we present a typical temporal partitioning methodology that temporally partitions a data flow graph on reconfigurable system. Our approach optimizes the communication cost of the design. This aim can be reached by minimizing the transfer of data required between design partitions and the routing cost between FPGA modules. Consequently, our algorithm is composed by two main steps. The first step aims to find a temporal partitioning of the graph. This step gives the optimal solution in term of communication cost. Next, our approach builds the best architecture, on a partially reconfigurable FPGA, that gives the lowest routing cost between modules. The proposed methodology was tested on several examples on the Xilinx Virtex-II pro. The results show significant reduction in the communication cost compared with others famous approaches used in this field.     

2-Level error (drift) compensation for low-cost MEMS-based inertial measurement unit (IMU)

In this paper, we extend the 1-level compensation method for MEMS-based IMUs, dealing mainly with stochastic drifts, described in our previous work Yudanto et al. (Proc SPIE, 9517:95,172H-95–95,172H-12, 2015) to a 2-level compensation method dealing with both stochastic and temperature drifts. While the 1-level compensation method is based on an automatic detection of systems states which triggers an online recalibration of the sensors parameters, the 2-level compensation method extends the 1-level compensation method by using a model-based approach to remove the temperature influences in the sensors outputs. The 2-level compensation schemes are then integrated together to allow an algorithmic framework that can be used in an easy way to auto-calibrate MEMS-based IMUs. Experiments using an industrial MEMS-based IMU under various operating conditions have been conducted to demonstrate the added value of the 2-level compensation method. The experimental results show that the estimations of acceleration and angular velocity based on the 2-level compensation method are in general more accurate than the ones obtained based on the 1-level compensation method.     

Route Maintenance in IEEE 802.11 wireless mesh networks

In this paper, we propose a novel Route Maintenance scheme for IEEE 802.11 wireless mesh networks. Despite lack of mobility and energy constraints, reactive routing protocols such as AODV and DSR suffer from frequent route breakages in 802.11 based infrastructure wireless mesh networks. In these networks, if any intermediate node fails to successfully transmit a packet to the next hop node after a certain number of retransmissions, the link layer reports a transmission problem to the network layer. Reactive routing protocols systematically consider this as a link breakage (and therefore a route breakage). Transmission failures can be caused by a number of factors e.g. interference or noise and can be transient in nature. Frequent route breakages result in significant performance degradation. The proposed mechanism considers multiple factors to differentiate between links with transient transmission problems from those links which have permanent transmission problems and takes a coherent decision on link breakage. The proposed mechanism is implemented in AODV for single-radio single-channel mesh network and an extension is incorporated in multi-radio multi-channel scenarios. Simulation results show substantial performance improvement compared to classical AODV and local route repair schemes.     

Narrow‐band interference suppression in wavelet packets based multicarrier multicode CDMA overlay system

The wavelet packets based multicarrier (MC) multicode (MCD) code‐division multiple‐access (CDMA) transceiver consists of the MCD part, which ensures the transmission for high speed and flexible data rate; the MC part contributing to robustness to frequency‐selective fading and flexibility for handling multiple data rates; and wavelet packets (WPs) modulation technique, which contributes to the mitigation of the interference problems. As WPs have lower sidelobes compared with sinusoidal carriers, this system is very effective in reducing the problem of inter‐carrier interference. Of course, like any CDMA system, the system can suppress a given amount of interference. This paper considers an interference suppression scheme which will enhance the performance of the system. The receiver employs suppression filters to mitigate the effect of narrow‐band jammer interference. The framework for the system and the performance evaluation are presented in terms of the bit error rate and the outage probability over a Nakagami fading channel. Also, we investigate how the performance is influenced by various parameters, such as the number of taps of the suppression filter and the ratio of narrow‐band interference bandwidth to the spread‐spectrum bandwidth. Finally, the performance of the system is compared with the performance of sinusoidal based MC/MCD‐CDMA system denoted Sin‐MC/MCD‐CDMA. Copyright © 2012 John Wiley & Sons, Ltd.     

Photocatalytic degradation of methyl orange dye by NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles under visible irradiation: effect of varying the synthesis temperature

Nanoparticles of nickel ferrites (NiFe₂O₄) were synthesized at different temperature of synthesis (25, 50 and 80 °C) through the chemical co-precipitation method. The synthesized powders were characterized using X-ray diffraction for crystallite size and lattice parameter calculation. It reveals the presence of cubic spinel structure of ferrites with crystallite size between 29 and 41 nm. Transmission electron microscopy and scanning electron microscopy showed uniform distribution of ferrite particles with some agglomeration. The Fourier-transform infrared spectroscopy showed absorption bonds, which were assigned to the vibration of tetrahedral and octahedral complexes. Raman spectroscopy is used to verify that we have synthesized ferrite spinels and determines their phonon modes. The thermal decomposition of the NiFe₂O₄ was investigated by TGA/DTA. The optical study UV–visible is used to calculate the band gap energy. Magnetic measurements of the samples were carried out by means of vibrating sample magnetometer and these studies reveal that the formed nickel ferrite exhibits ferromagnetic behavior. Photoluminescence showed three bands of luminescence located at 420, 440 and 535 nm. The photocatalytic properties of nickel ferrite (NiFe₂O₄) nanoparticles were evaluated by studying the photodecomposition of methyl orange as organic pollutant models and showed a good photocatalytic activity.     

Two‐sided matching framework for optimal user association in 5G multi‐RAT UDNs

Recently, academic and industrial research communities are paying more explicit attention to the 5G multiple radio access technology ultra‐dense networks (5G multi‐RAT UDNs) for boosting network capacity, especially in UD urban zones. To this aim, in this paper, we intend to tackle the user association problem in 5G multi‐RAT UDNs. By considering the decoupled uplink/downlink access (DUDA), we divide our user association problem into two distinct subproblems representing, respectively, the uplink and the downlink channels. Next, we formulated each one as a nonlinear optimization problem with binary variables. Then, to solve them, we were restricted by the hard complexity, as well as the hard feasibility of centralized user association schemes. Thus, to resolve our user association problem in a reasonable time and distributed manner, we formulated each subproblem as a many‐to‐one matching game based on matching theory. Next, we provide two fully distributed association algorithms to compute the uplink and downlink stable matching among user equipments (UEs) and base stations (BSs). Simulation results corroborate our theoretical model and show the effectiveness and improvement of our achieved results in terms of the overall network performance, quality of service (QoS), and energy efficiency (EE) of UEs.     

Electrochemical oxidation of hydroquinone, resorcinol, and catechol on boron-doped diamond anodes

The electrochemical oxidation of aqueous wastes polluted with hydroquinone, resorcinol, or catechol on boron-doped diamond electrodes has been studied. The complete mineralization of the organic waste has been obtained independently of the nature of each isomer. No aromatic intermediates were found during the treatment, and solely aliphatic intermediates (carboxylic acids C4 and C2, mainly) were detected in the three cases. Although as from the bulk electrolyses study no differences in the electrochemical oxidation of dihydroxybenzenes seem to exist, different voltammetric behavior between resorcinol and the other two isomers was obtained in the voltammetric study. Catechol and hydroquinone have a reversible quinonic form, and a cathodic reduction peak appears in their voltammograms. The characterization of the first steps in the electrochemical oxidation of the three dihydroxybenzenes showed the formation of a larger number of intermediates in the oxidation of catechol, although no carbon dioxide was detected in its oxidation. Conversely, the oxidation of resorcinol and hydroquinone lead to the formation of important concentrations of carbon dioxide. The nondetection of aromatic intermediates, even if small quantities of charge are passed, confirms that the oxidation must be carried out directly on the electrode surface or by hydroxyl radicals generated by decomposition of water.