Expert judgement on the long term possibilities of conventional emission abatement technologies for passenger cars

Topics in Catalysis - This paper presents the results of a quantitatively substantiated “expert judgement” concerning the potential for further reduction of the exhaust emissions of...     

Network trust management in emergency situations

We study the unique trust management, and more precisely reputation management and revocation of malicious nodes in the context of ad hoc networks used for emergency communications.Unlike in centralized systems, reputation management and revocation in ad hoc networks is non-trivial. This difficulty is due to the fact that the nodes have to collaboratively calculate the reputation value of a particular node and then revoke the node if the reputation value goes below a threshold. A major challenge in this scheme is to prevent a malicious node from discrediting other genuine nodes. The decision to revoke a node has to be communicated to all the nodes of the network. In traditional ad hoc networks the overhead of broadcasting the message throughout the network may be very high. We solve the problem of reputation management and node revocation in ad hoc networks of cell phones by using a threshold cryptography based scheme. Each node of the network would have a set of anonymous referees, which would store the reputation information of the node and issue reputation certificates to the node with timestamps. The misbehavior of a particular cell phone is reported to its anonymous referees, who issue certificates which reflect the positive and negative recommendations.     

A web-based e-learning system for increasing study efficiency by stimulating learner’s motivation

Due to the opportunities provided by the Internet, more and more people are taking advantage of distance learning courses and during the last few years enormous research efforts have been dedicated to the development of distance learning systems. So far, many e-learning systems are proposed and used practically. However, in these systems the e-learning completion rate is about 30%. One of the reasons is the low study desire when the learner studies the learning materials. In this research, we propose an interactive Web-based e-learning system. The purpose of our system is to increase the e-learning completion rate by stimulating learner’s motivation. The proposed system has three subsystems: the learning subsystem, learner support subsystem, and teacher support subsystem. The learning subsystem improves the learner’s study desire. The learner support subsystem supports the learner during the study, and the teacher support subsystem supports the teacher to get the learner’s study state. To evaluate the proposed system, we developed several experiments and surveys. By using new features such as: display of learner’s study history, change of interface color, encourage function, ranking function, self-determination of the study materials, and grouping of learners, the proposed system can increase the learning efficiency.

Localization-limited exciton oscillator strength in colloidal CdSe nanoplatelets revealed by the optically induced stark effect

2D materials are considered for applications that require strong light-matter interaction because of the apparently giant oscillator strength of the exciton tra...     

Efficiency loss prevention in monolithically integrated thin film solar cells by improved front contact

For thin film solar cells, there is a large gap between the record efficiencies and panel power output. It was found that for a “typical industrial” CIGS cell efficiency of 15.5%, the efficiency drops to 11.7% when it is operating under the circumstances of a monolithically integrated solar panel. Part of this gap is due to limited conductivity and transmittance of the front contact. By application of a metallic grid, the conductivity can be improved by over two order of magnitude at a transmittance loss of only a few percent as was shown experimentally. In addition, modeling was used to quantify the impact of such approach on the power output of monolithically integrated solar panels. This model includes optical and resistive losses, as well as related losses caused by the inhomogeneity of the operating voltage over the surface. Both power output and the different types of losses are mapped out for various cell configurations. Optimization of transparent conductive oxide resistance, cell length, finger width, and finger spacing of grids was performed and led to an efficiency improvement from 11.7% to 13.8% when the front contact is upgraded with a metallic grid consisting of 20 µm wide parallel fingers positioned perpendicular to the interconnect. Further optimization for a wide variety of cell and grid configurations show that for a technically more feasible size of 100 µm wide fingers, the calculated efficiency is still 13.5%. Finally, the power output is mapped out for a large number of configurations as to create an overview and insight in the interdependencies of cell configuration and finger dimensions. Copyright © 2014 John Wiley & Sons, Ltd.     

Determining key colors from a design perspective using dE-means color clustering

Designing a mood board is a creative tool designers often employ at the start of a new (interior) design project. The colors of a mood board represent important information about the envisioned interior designs. In this article, we focus on digital mood boards and we propose a novel method to determine the mood boards' key colors from a design perspective using dE-means color clustering. This proposed algorithm includes a fixed initialization to overcome the non-deterministic nature of traditional k-means, and a merging step to ensure all colors in the calculated palette are at least a dE-threshold apart. Quantitative and qualitative results demonstrate that the proposed algorithm outperforms existing methods in determining the key colors from a design perspective. Additionally, we introduce a novel method to visualize the calculated color palettes that takes into account the contribution of individual pixels to the construction of the calculated color palettes. Finally, we demonstrate how the proposed algorithm can be used to characterize color palettes for various design styles like modern, industrial and art deco.     

Exploring the potential of recovering 1‐butanol from aqueous solutions by liquid demixing upon addition of carbohydrates or salts

BACKGROUND: Fermentative production of 1‐butanol yields dilute aqueous solutions. Recovery of the butanol from these solutions is most commonly performed by energy‐intensive distillation. This work investigated the liquid‐liquid (L‐L) phase behavior of mixtures of butanol and water to explore the potential of using L‐L phase separation as a recovery possibility for 1‐butanol. The phase behavior is preferably influenced by compounds already present in the fermentation, such as carbohydrates and salts. RESULTS: The L‐L phase equilibria of butanol and water were determined in the presence of glucose, fructose, sucrose, NaCl, LiCl and CaCl₂. The aqueous and organic phase split is more pronounced in the presence of salts than in the presence of carbohydrates. Demixing is achieved with about 0.3 kg salt kg^?1 aqueous phase containing 40 g of butanol. CONCLUSION: Operation of L‐L based recovery using salts or carbohydrates requires extreme concentrations of those compounds. For feed material containing 40 g kg^?1 butanol, the tested carbohydrates do not influence the phase equilibria sufficiently to allow butanol separation. Fermentative butanol concentrations up to 70 g kg^?1 are required to create an effective L‐L phase split. The remaining residual aqueous carbohydrate solution might be used as feed for a following fermentation. Copyright © 2011 Society of Chemical Industry     

Kinetic and stoichiometric characterisation of streptavidin-binding aptamers

Aptamers are oligonucleotide ligands that are selected for high-affinity binding to molecular targets. Only limited knowledge relating to relations between structural and kinetic properties that define aptamer-target interactions is available. To this end, streptavidin-binding aptamers were isolated and characterised by distinct analytical techniques. Binding kinetics of five broadly similar aptamers were determined by surface plasmon resonance (SPR); affinities ranged from 35-375 nM with large differences in association and dissociation rates. Native mass spectrometry showed that streptavidin can accommodate up to two aptamer units. In a 3D model of one aptamer, conserved regions are exposed, strongly suggesting that they directly interact with the biotin-binding pockets of streptavidin. Mutational studies confirmed both conserved regions to be crucial for binding. An important result is the observation that the most abundant aptamer in our selections is not the tightest binder, emphasising the importance of having insight into the kinetics of complex formation. To find the tightest binder it might be better to perform fewer selection rounds and to focus on post-selection characterisation, through the use of complementary approaches as described in this study.