High density recording with perpendicular Co-Cr-Nb media and ring heads

Effective double layer structure was investigated by adding Nb to the sputtering source of Co-Cr thin film perpendicular magnetic recording tapes. The output from the tapes was measured with a ring head through to the short wavelength, λ50=0.19 μm (D50=267KFRPI).     

Isolation and characterization of a novel human pancreas-specific gene, pancpin, that is down-regulated in pancreatic cancer cells

We reviewed 19 children and adolescents with cervical spine congenital synostosis as in Klippel-Feil syndrome (KFS), with an average follow-up of 12.5 years. We paid particular attention to neurologic complications associated with cervical spine abnormalities. Five patients were affected by neurologic complications; four underwent a surgical procedure; and 14 had no neurologic finding. Two had hypermobility at one level, and one had hypermobility at two levels. We found that the more numerous the occipito-C1 abnormalities, the more significant the neurologic risk. In contrast, this risk was not related to the number of "mobile blocks" or to age. Various mechanisms of neural complications have been studied in the literature: medullary abnormality, spinal instability, narrowing of the cervical canal, and vascular dysfunction. Surgery is usually thought to be required in cases with neurologic complications. The indication for surgery is, however, less clear in cases of pure instability without neurologic involvement because surgery is likely to increase the future risks at mobile disks either above or below the fuse level. Careful clinical and radiologic observation is necessary in such patients. Magnetic resonance imaging (MRI) with lateral views in flexion and extension seem to be the best method for detecting impingement of the spine on the cord.     

Growth of AgGaTe2 and AgAlTe2 Layers for Novel Photovoltaic Materials

AgGaTe₂ and AgAlTe₂ layers were grown on a-plane sapphire substrates by closed-space sublimation. These compounds replace Cd in CdTe with group I and III elements, and are, hence, expected to be ideal novel candidate materials for solar cells. The grown layers were confirmed to be stoichiometric AgGaTe₂ and AgAlTe₂ by x-ray diffraction (XRD). The AgAlTe₂ layers had strong preference for the (112) orientation. The XRD spectrum of the AgGaTe₂ layer was different from that of the AgAlTe₂ layer, and strong peaks were observed for (103) and (110) diffraction. The variation in orientations of the grown layers was analyzed in detail by use of XRD pole figures, which revealed that the AgGaTe₂ layers had an epitaxial relationship with the a-plane sapphire substrates.     

Pulverization mechanism of hydrogen storage alloys on microscale packing structure

In-situ and transient visualizations of the packing structure of a hydrogen storage alloy bed are carried out using an X-ray computed tomography (CT) system. The packing structure is clearly observed on the microscale using the CT system. When the alloy bed is subjected to hydrogen absorption–desorption cycles, the pulverization progresses from the lower to the upper regions of the bed. After several hydrogen absorption–desorption cycles, the packing structure in the lower region of the bed changes and the microstructural void decreases slightly. Based on these results, we propose a pulverization mechanism of the packed bed in which the friction between particles affects the pulverization process.     

Effects of supercritical carbon dioxide treatment on the morphology of poly(l‐lactide)

Synthetic l ‐lactide random copolymers can be employed as controlled release materials when prepared using supercritical carbon dioxide (scCO₂), since they are biodegradable via hydrolysis. To determine the effects of thermal properties on polymer performance following scCO₂ processing, three types of poly(l ‐lactide) having different properties were assessed. The T_m of one poly(l ‐lactide) sample (H‐100) was found to be approximately 170 °C over the processing pressure range from 8 to 18 MPa, while a second sample (H‐440) also showed a constant value of approximately 152 °C. In contrast, the poly(l ‐lactide) REVODE exhibited a T_m of 146 °C prior to processing but a higher value of 147 °C following treatment at 8 MPa. Unlike the H‐100 and H‐440, the T_m value of the REVODE tended to decrease with increasing pressure. The T_g values increased greatly under mild conditions of 8 MPa pressure and a temperature of 40 °C. In particular, the T_g values for the H‐440 and REVODE increased by 4 °C and 5 °C, respectively. All T_g values were lowest at 12 MPa and increased with increasing processing pressure, although the effect of processing temperature was minimal. The Χ_{c DSC} of the H‐100 was 18% initially but increased to 20% upon scCO₂ processing at 40 °C and 14 MPa, and showed further increases at higher processing temperatures. Although the relationship between processing temperature and Χ_{c DSC} values for the H‐440 showed the same trend as observed with the H‐100, a different trend was seen for the REVODE. The Χ_{c XRD} values obtained from the XRD analyses differed from the values generated by DSC analysis, and showed a maximum degree of crystallinity following processing at 80 °C both with and without scCO₂ treatment. ATR FT‐IR analyses identified peaks due to semicrystalline regions in poly(l ‐lactide) samples treated with scCO₂, even when applying low temperatures. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44006.     

Inactivation of Bacillus spores by the combination of moderate heat and low hydrostatic pressure in ketchup and potage

The combination effect of moderate heat and low hydrostatic pressure (MHP) on the reduction of Bacillus subtilis, Bacillus coagulans and Geobacillus stearothermophilus spores in food materials (potage and ketchup) was investigated. These bacterial spores were suspended in potage (pH 7), acidified potage (pH 4), neutralized ketchup (pH 7) and ketchup (pH 4). The suspensions were treated with and without pressure (100 MPa) and temperatures of 65-85 degrees C for 3 to 12 h. The bacterial spores were inactivated by 4-8 log cycles during MHP treatment in potage, acidified potage and ketchup, whereas the spores were highly resistant to long time heat treatment in potage and neutralized ketchup. The degrees of spore destruction were mostly dependent on pH and medium composition during MHP treatment. The inactivation effect in MHP treatment was higher at the pH 7 than at pH 4 both in ketchup and potage. The bacterial spores showed higher inactivation in potage than ketchup during MHP treatment.     

Denatured-jacalin derivatives with selective recognition for O-linked glycosides (ST,T, Tn,and STn Type) on IgA1 hinge region

Immunoglobulin A1 (IgA1) concentration in the plasma of patients with IgA nephropathy (IgAN) as the cause of renal failure is higher than that in the plasma of normal controls. IgA1 with abnormal sugars is considered to deposit in the glomerular mesangium, aggravating nephritis in IgAN. Jacalin is a lectin that recognizes sugars on IgA1. However, its selective-recognition for normal-type (ST type, NeuAc-α(2,3)-Gal-β(1,3)-GalNAc) and abnormal-type (T type, Gal-β(1,3)-GalNAc; Tn type, GalNAc; STn type, NeuAc-α(2,6)-GalNAc) sugars α-O-linked to serine/threonine in IgA1 is weak. Therefore, jacalin cannot be used for recognizing specific sugar types on IgA1. We attempted to develop a new recognition method for specific sugar types on IgA1 by utilizing the multirecognition capability of jacalin. Its binding abilities were regulated by heat denaturation with suitable template sugar (galactose or N-acetylgalactosamine). Further, we successfully prepared denatured-jacalin derivatives, which recognized ST-/T-type sugars on IgA1, by sugar-immobilized affinity chromatography. Enzyme-linked immunosorbent assay of denatured-jacalin derivatives, showed the ratios of abnormal sugars on IgA1 in the plasma of IgAN patients and normal controls to be approximately 60% and 20%, respectively. The results proved that profiling of sugar types in IgAN can successfully be performed by solely using jacalin derivatives.     

Adjuvant intra-arterial chemotherapy with gastrin receptor antagonist after hepatic resection in colorectal cancer metastasis

The aim of this study was to determine whether chemo-endocrine therapy after the resection of liver metastasis from colorectal cancer would prevent recurrence in the remnant liver and prolong survival. Eleven colorectal cancer patients underwent hepatic resection for liver metastasis. Subsequently, they were administered Proglumide gastrin antagonist 1,200 mg/day + 5'-DFUR 800 mg/day for 2 years. In seven of them, MMC 6-10 mg and ADM 20 mg were infused intra-arterially every two weeks alternately for one year. In four of them, 5-FU 250 mg/day was infused for seven days continuously intra-arterially every two weeks for one year. Recurrence in the remnant liver occurred in four of 11 patients. All of these patients underwent repeated hepatectomy. The mean disease-free survival in the remnant liver was 37 months and the five-year survival rate was 91%. These results indicate that intra-arterial chemotherapy with gastrin receptor antagonist might be effective for adjuvant therapy in patients with resectable liver metastasis from colorectal cancer.