KINETICS FOR LOW TEMPERATURE PYROLYSIS OF BLACK LIQUOR

A kinetic study of pyrolysis of dried black liquor was performed using a Netzsch 429 Thermogravimetric Analyzer. It was found that as conversion increases from 10 to 45% the apparent pyrolysis activation energy for black liquor increases from 77.20 to 112.74 KJ/mol. For black liquor the order of reaction was found to be first-order. The reaction rate constant was found to be 2.12×10⁹ min. These results are in agreement with the data reported by other investigators on biomass pyrolysis.     

Excavation and support design of the Dicle–Kralkizi water tunnel: an overview

Tunneling projects have their uniqueness in terms of engineering problems. The expertise gained from analyzing these projects establishes a sound basis for future application. This paper conveys experiences gained during the construction and support of the design of the Dicle–Kralkizi water tunnel, Turkey. Tunnel stability problems including overbreaks and surface subsidence are evaluated. An analysis of the breakdowns, factors controlling advance rate and the overall performance of tunnel are covered. The accumulated information presented here is believed to be useful and reliable for a successful tunnel excavation in similar formations.     

Radar cross-section study of cylindrical cavity-backed apertureswith outer or inner material coating: the case of H-polarization

A dual-series-based solution is obtained for the scattering of an H-polarized plane wave from a slitted infinite circular cylinder coated with absorbing material from inside or outside. For both cases, numerical results are presented for the radar cross section and comparisons are given for two different realistic absorbing materials. The radar cross-section dependencies are also given for the aspect angle of the scatterer and the thickness of the absorbing layer     

Receptance coupling for end mills

Identification of chatter free cutting conditions, the chatter stability lobes, requires a measurement of the frequency response function (FRF) of each tool mounted on the spindle. This paper presents a method of assembling known dynamics of the spindle–tool holder with an analytically modeled end mill using the receptance coupling technique. The classical receptance technique is enhanced by proposing a method of identifying the end mill–spindle/tool holder joint dynamics, which include both translational and rotational degrees of freedom. The method requires measurement of FRFs with impact tests applied on the spindle–tool holder assembly and blank calibration cylinders attached to the spindle. The spindle and tool holder characteristics are completely identified from the two experiments, and used for the mathematical prediction of FRF for end mills with arbitrary dimensions. The proposed method is experimentally proven and verified in cutting tests.     

Determination of the optimum conditions for ion nitriding of AISI 5140 steel

AISI 5140 low alloy steel was ion nitrided under different process parameters including time (1, 4, 8 and 12 h), temperature (400, 450, 500 and 550 °C) and gas mixture ratio (0.05, 0.33, 1 and 3 N₂/H₂). By determining the fatigue strength, surface hardness, compound layer thickness and case depth, the optimum working conditions were determined by using a Taguchi design of experiment. After ion nitriding process, it is aimed to maximize fatigue strength, surface hardness and case depth as well as to minimize compound layer thickness. While the optimum conditions were determined, due to the goals (above aims) more than one being, the trade-off among goals was considered. First of all, each goal was optimised, separately. Then, all the goals were optimised together, considering the priority of the goals, and the optimum results were obtained at 0.05 N₂/H₂ gas mixture ratio, at the temperature of 450 °C and for 12 h process time.     

Feedrate Optimization for Spline Interpolation In High Speed Machine Tools

A feedrate optimization technique has been developed for minimizing the cycle time in machining spline toolpaths. Axis velocity, torque and jerk limits are considered throughout the motion in order to ensure smooth and linear operation of the servo drives with minimal tracking error. Feed modulation is achieved by manipulating segment durations which define the overall minimum jerk feed profile. Long toolpaths are handled by applying a windowing technique. The optimized feed profile allows nonzero acceleration and jerk values at segment connections, resulting in continuous and smooth motion within the velocity, torque, and jerk limits of the drives. The cycle time reduction obtained with the proposed technique is demonstrated in high speed contouring experiments.     

Medical image segmentation with transform and moment based features and incremental supervised neural network

In this study, a novel incremental supervised neural network (ISNN) is proposed for the segmentation of medical images. Performance of the ISNN is investigated for tissue segmentation in medical images obtained from various imaging modalities. Two feature extraction methods based on transform and moments are comparatively investigated to segment the tissues in medical images. Two-dimensional (2D) continuous wavelet transform (CWT) and the moments of the gray-level histogram (MGH) are computed in order to form the feature vectors of ultrasound (US) bladder and phantom images, X-ray computerized tomography (CT) and magnetic resonance (MR) head images. In the 2D-CWT method, feature vectors are formed by the intensity of one pixel of each wavelet-plane of different energy bands. The MGH represents the tissues within the sub-windows by using the spatial variation of image intensities. In this study, the ISNN and Grow and Learn (GAL) network are employed for the segmentation task. It is observed that the ISNN has significantly eliminated the disadvantages of the GAL network in the segmentation of the medical images.     

DESIGN OF TEMPERATURE CONTROLLED QUARTZ CRYSTAL MICROBALANCE SYSTEM

In this study, the dual modulated quartz crystal microbalance (QCM) with heating and cooling control has been developed for the quantitative determination of biological molecules, as a biosensor. On the other hand, since, the Sauerbrey formula is misprinted in some publications, the correct form of formula is also discussed. The proposed QCM biosensor has three main parts, which are the oscillator circuit, temperature control circuit, and the differential frequency measurement unit. Colpitts oscillators with the buffer amplifier, microcontroller (PIC16F877) for the temperature control circuit and a peltier element were used for heating and cooling inside the developed system. Differential frequency measurement is a known technique to compensate environmental effects causing instability of crystals. For this reason, one of the crystals is implemented with oscillatory circuits, i.e., the detector; the other one is used as the reference. The designed system was tested between 8°C and 50°C and frequency shift versus temperature is observed at 0.5 ppm/°C over a given temperature range.     

Mechanics of micro-milling with round edge tools

This paper presents analytical prediction of micro-milling forces from constitutive model of the material and friction coefficient. The chip formation process is predicted with a slip-line field model which considers the strain hardening, strain-rate and temperature effects on the flow stress of the material. The cutting force coefficients are identified from series of slip-line field simulations at a range of cutting edge radii and chip loads. The predicted cutting force coefficients are used to simulate micro-milling forces. The proposed chain of predictive micro-milling model is experimentally proven by conducting brass cutting tests with a 200 μm diameter helical end mill.     

Synthesis and proton conductivity studies of 5‐aminotetrazole‐doped sulfonated polymer electrolyte membranes

This work reports the preparation and characterization of a new anhydrous proton conducting membrane based on poly(vinyl alcohol) (PVA), sulfosuccinic acid (SSA), and 5‐aminotetrazole (ATet) at various stoichiometric ratios. The proton conductivities of membranes were investigated as a function of ATet composition, SSA composition, and temperature. New anhydrous proton conducting membranes were characterized by infrared spectra, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), methanol permeability, and impedance measurements for proton conductivity. TGA showed that the samples were thermally stable up to 150°C. DSC results illustrated the homogeneity of the materials. Mechanical analysis showed that the storage modulus of the PVA–SSA–ATet blend polymer membranes decreased with increasing ATet content. The membranes with higher tetrazole content, or higher acid doping level presented the higher proton conductivity. PVA–SSA–ATet4 can exhibit an anhydrous proton conductivity of 1.7 × 10⁻³ S/cm at 130°C and the proton conductivity increased with increasing temperature and acid doping level. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers